frowsiter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2017, 12:42:42 PM |
|
Though I'm not in mining I liked your post. I did not go through all the parts however but seems to be heavenly information for miners. I'm no expert but for fury as you said updating won't work then not implement a extra ram to boost its memory consumption so that it may get faster. I'm not sure if it is really true but I read somewhere about the ram thing. It would be grateful if you correct me on my point. I will do mining someday but I'm very afraid that I will loose money on it as it is hard these days to mine coins. With your post a complete set up can be made for Claymore's ZCash AMD GPU Miner. That's a fruitful info and thanks for sharing.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4452
Merit: 3924
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2017, 01:55:52 PM |
|
some cards do not display vrm temps. but if the core is cool, chances are the vrms are ok also.
Please don't give people who don't know any better terrible advice like that - I was mining on my linux dev/test rig, Naomi, just a day ago, and had strange crashes when core was under 70C. I used one of my tools to check the temps on the VRM controller feeding the core - it was over 106C. Also, I assume that under Windows, the tools you guys have should show VRM temps on all cards except those with an NCP81022 feeding the core - because I can't get temps off it either; cheap piece of shit has no sensor. ok, i will take your word for it. edited my post above to strike out that line. guess ive been lucky. what tools do you use?
|
|
|
|
fmz89
Legendary
Offline
Activity: 1764
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2017, 04:11:01 PM |
|
how do you lower the overall temperature of the work?
For instance open the window.
Yes you can do that, and also some big fans. The best is air conditioning does undervolting gpu also reduce the gpu temperature? and if gpu temperature reduce, does also reduce hashrates? or what is the purpose of undervolting gpu? the purpose is reducing power consumption around -40% , hashrate -15%, temp -15% hope you understand what ppl mean
|
|
|
|
jeremyf327
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2017, 08:21:10 PM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I use suprnova. zec.suprnova.cc
|
|
|
|
homi4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 01:56:34 AM |
|
Hello @Claymore,
I have problem with rx 480 and r9 nano running together. I tried driver from 16.9.2 to 17.5.2 without success. R9 nano is not wotking with default settings, but it give 340 H/s with -asm 0 -a 2. When I use 15.12 driver without rx 480, it give 430 H/s.
Can you please advice in this case? log:
07:19:38:306 cb4 args: -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3 -di 0 -ttli 71 -mport 0 07:19:38:322 cb4 07:19:38:322 cb4 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 07:19:38:322 cb4 є Claymore's ZCash AMD GPU Miner v12.4 є 07:19:38:322 cb4 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 07:19:38:322 cb4 07:19:38:541 cb4 ZEC: 1 pool is specified 07:19:38:541 cb4 Main ZCash pool is eu1-zcash.flypool.org:3443 07:19:39:010 cb4 OpenCL platform: AMD Accelerated Parallel Processing 07:19:39:025 cb4 OpenCL initializing... 07:19:39:041 cb4 driver 10.0.2348.3 07:19:39:041 cb4 AMD Cards available: 1 07:19:39:041 cb4 GPU #0: Fiji, 4096 MB available, 64 compute units 07:19:39:041 cb4 GPU #0 recognized as Fury X/Nano 07:19:39:041 cb4 POOL version 07:19:39:041 cb4 b555 07:19:39:041 cb4 Platform: Windows 07:19:39:291 cb4 start building OpenCL program for GPU 0... 07:19:39:291 cb4 done 07:19:40:072 cb4 GPU #0 algorithm ASM, intensity 6 07:19:40:072 cb4 Total cards: 1 07:19:53:728 cb4 Watchdog enabled 07:19:53:728 cb4
07:19:53:744 b38 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443 (SSL/TLS) 07:19:54:010 b38 cert subject: /OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org 07:19:54:010 b38 cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA 07:19:54:010 b38 SSL/TLS encryption is enabled 07:19:54:025 b38 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "eu1-zcash.flypool.org", "3443"]}
07:19:54:025 b38 send: {"id": 2, "method": "mining.authorize", "params": ["t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3",""]}
07:19:54:025 b38 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
07:19:54:025 b38 ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS) 07:19:54:119 b38 got 62 bytes 07:19:54:119 b38 buf: {"id":1,"result":["01a897f7c8", "01a897f7c8"], "error": null}
07:19:54:119 b38 parse packet: 58 07:19:54:119 b38 new buf size: 0 07:19:54:197 b38 got 38 bytes 07:19:54:197 b38 buf: {"id":2,"result":true, "error": null}
07:19:54:197 b38 parse packet: 35 07:19:54:197 b38 ZEC: Authorized 07:19:54:197 b38 new buf size: 0 07:19:54:197 b38 got 119 bytes 07:19:54:197 b38 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}
07:19:54:213 b38 parse packet: 118 07:19:54:213 b38 Pool sets new share target: 0x00083126 (diff: 8000H) 07:19:54:213 b38 new buf size: 0 07:19:55:197 b38 got 310 bytes 07:19:55:197 b38 buf: {"id":null,"method":"mining.notify","params":["95c778c1224b3450cc69","04000000","dad1db62573444c6f48a7dc40b65b5c1b5664ca19a1f981fec5cba5300000000","90e86915accf9daf92abe61fabf7a57982e872cf2debf4d3a046b047f38e6915","0000000000000000000000000000000000000000000000000000000000000000","65502059","e096531c",true]}
07:19:55:197 b38 parse packet: 309 07:19:55:197 b38 new buf size: 0 07:20:23:885 cb4 GPU0 t=57C fan=37% 07:20:23:900 cb4 em hbt: 0, fm hbt: 94, 07:20:23:900 cb4 watchdog - thread 0, hb time 172 07:20:23:900 cb4 watchdog - thread 1, hb time 94 07:20:23:900 cb4 watchdog - thread 2, hb time 0 07:20:23:900 cb4 watchdog - thread 3, hb time 266 07:20:54:056 cb4 GPU0 t=57C fan=38% 07:20:54:072 cb4 em hbt: 0, fm hbt: 78, 07:20:54:072 cb4 watchdog - thread 0, hb time 23797 07:20:54:072 cb4 watchdog - thread 1, hb time 23703 07:20:54:072 cb4 watchdog - thread 2, hb time 23609 07:20:54:072 cb4 watchdog - thread 3, hb time 23516 07:21:24:235 cb4 GPU0 t=57C fan=37% 07:21:24:235 cb4 em hbt: 0, fm hbt: 78, 07:21:24:251 cb4 watchdog - thread 0, hb time 53984 07:21:24:251 cb4 watchdog - thread 1, hb time 53890 07:21:24:251 cb4 watchdog - thread 2, hb time 53796 07:21:24:251 cb4 watchdog - thread 3, hb time 53703 07:21:54:407 cb4 GPU0 t=57C fan=37% 07:21:54:407 cb4 em hbt: 0, fm hbt: 63, 07:21:54:422 cb4 watchdog - thread 0, hb time 84156 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 1, hb time 84062 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 2, hb time 83968 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:438 cb4 watchdog - thread 3, hb time 83875 07:21:54:438 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:55:985 cb4 Restarting OK, exit...
|
|
|
|
ayiphelmy
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 416
Merit: 105
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 02:58:03 AM |
|
Hello @Claymore,
I have problem with rx 480 and r9 nano running together. I tried driver from 16.9.2 to 17.5.2 without success. R9 nano is not wotking with default settings, but it give 340 H/s with -asm 0 -a 2. When I use 15.12 driver without rx 480, it give 430 H/s.
Can you please advice in this case? log:
07:19:38:306 cb4 args: -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3 -di 0 -ttli 71 -mport 0 07:19:38:322 cb4 07:19:38:322 cb4 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 07:19:38:322 cb4 є Claymore's ZCash AMD GPU Miner v12.4 є 07:19:38:322 cb4 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 07:19:38:322 cb4 07:19:38:541 cb4 ZEC: 1 pool is specified 07:19:38:541 cb4 Main ZCash pool is eu1-zcash.flypool.org:3443 07:19:39:010 cb4 OpenCL platform: AMD Accelerated Parallel Processing 07:19:39:025 cb4 OpenCL initializing... 07:19:39:041 cb4 driver 10.0.2348.3 07:19:39:041 cb4 AMD Cards available: 1 07:19:39:041 cb4 GPU #0: Fiji, 4096 MB available, 64 compute units 07:19:39:041 cb4 GPU #0 recognized as Fury X/Nano 07:19:39:041 cb4 POOL version 07:19:39:041 cb4 b555 07:19:39:041 cb4 Platform: Windows 07:19:39:291 cb4 start building OpenCL program for GPU 0... 07:19:39:291 cb4 done 07:19:40:072 cb4 GPU #0 algorithm ASM, intensity 6 07:19:40:072 cb4 Total cards: 1 07:19:53:728 cb4 Watchdog enabled 07:19:53:728 cb4
07:19:53:744 b38 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443 (SSL/TLS) 07:19:54:010 b38 cert subject: /OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org 07:19:54:010 b38 cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA 07:19:54:010 b38 SSL/TLS encryption is enabled 07:19:54:025 b38 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "eu1-zcash.flypool.org", "3443"]}
07:19:54:025 b38 send: {"id": 2, "method": "mining.authorize", "params": ["t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3",""]}
07:19:54:025 b38 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
07:19:54:025 b38 ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS) 07:19:54:119 b38 got 62 bytes 07:19:54:119 b38 buf: {"id":1,"result":["01a897f7c8", "01a897f7c8"], "error": null}
07:19:54:119 b38 parse packet: 58 07:19:54:119 b38 new buf size: 0 07:19:54:197 b38 got 38 bytes 07:19:54:197 b38 buf: {"id":2,"result":true, "error": null}
07:19:54:197 b38 parse packet: 35 07:19:54:197 b38 ZEC: Authorized 07:19:54:197 b38 new buf size: 0 07:19:54:197 b38 got 119 bytes 07:19:54:197 b38 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}
07:19:54:213 b38 parse packet: 118 07:19:54:213 b38 Pool sets new share target: 0x00083126 (diff: 8000H) 07:19:54:213 b38 new buf size: 0 07:19:55:197 b38 got 310 bytes 07:19:55:197 b38 buf: {"id":null,"method":"mining.notify","params":["95c778c1224b3450cc69","04000000","dad1db62573444c6f48a7dc40b65b5c1b5664ca19a1f981fec5cba5300000000","90e86915accf9daf92abe61fabf7a57982e872cf2debf4d3a046b047f38e6915","0000000000000000000000000000000000000000000000000000000000000000","65502059","e096531c",true]}
07:19:55:197 b38 parse packet: 309 07:19:55:197 b38 new buf size: 0 07:20:23:885 cb4 GPU0 t=57C fan=37% 07:20:23:900 cb4 em hbt: 0, fm hbt: 94, 07:20:23:900 cb4 watchdog - thread 0, hb time 172 07:20:23:900 cb4 watchdog - thread 1, hb time 94 07:20:23:900 cb4 watchdog - thread 2, hb time 0 07:20:23:900 cb4 watchdog - thread 3, hb time 266 07:20:54:056 cb4 GPU0 t=57C fan=38% 07:20:54:072 cb4 em hbt: 0, fm hbt: 78, 07:20:54:072 cb4 watchdog - thread 0, hb time 23797 07:20:54:072 cb4 watchdog - thread 1, hb time 23703 07:20:54:072 cb4 watchdog - thread 2, hb time 23609 07:20:54:072 cb4 watchdog - thread 3, hb time 23516 07:21:24:235 cb4 GPU0 t=57C fan=37% 07:21:24:235 cb4 em hbt: 0, fm hbt: 78, 07:21:24:251 cb4 watchdog - thread 0, hb time 53984 07:21:24:251 cb4 watchdog - thread 1, hb time 53890 07:21:24:251 cb4 watchdog - thread 2, hb time 53796 07:21:24:251 cb4 watchdog - thread 3, hb time 53703 07:21:54:407 cb4 GPU0 t=57C fan=37% 07:21:54:407 cb4 em hbt: 0, fm hbt: 63, 07:21:54:422 cb4 watchdog - thread 0, hb time 84156 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 1, hb time 84062 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 2, hb time 83968 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:438 cb4 watchdog - thread 3, hb time 83875 07:21:54:438 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:55:985 cb4 Restarting OK, exit...
u can't mix r9 nano with rx480 in 1 rig... that's because driver not compatible in claymore software.... u can mix r9 nano only with 390 or 390x.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 05:53:17 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org).
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Estimated
Newbie
Offline
Activity: 44
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 08:15:13 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org). I tried several pools. flypool is the best.
|
|
|
|
joe50
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 117
Merit: 63
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 09:01:17 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org). thanks, already switched to flypool.
|
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 10:53:48 AM |
|
I have a 3 slot model, but checked that it works. Just remember this is for AMD cards Only.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4452
Merit: 3924
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 11:07:49 AM |
|
0k, i will take your word for it. edited my post above to strike out that line. guess ive been lucky. what tools do you use?
As I said, I wrote them myself - the closest analog to what I'm working on and polishing is WattTool for Windows, I think. Allows you to see VRM temps, set/get voltages, set/get offsets, change VRM switching frequency, and more - but WattTool can only give you this control over IR3567B and compatible VRM controllers. Mine supports four controllers that are used in AMD cards as main controllers (and sometimes this main controller is used for other purposes in the card besides core volts - for example, XFX RS 470/480 cards use the NCP81022's main output (VDD) for core (duh) but use the other one (VDDNB) for the IMC voltage (VDDCI.)) I've also added basic support for one controller that's more of a secondary one, which I found on my DirectCU II 290X. It controls MVDDC. sounds like a dangerous tool in the hands of a noob. those are the best kinds of tools IMO ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) any chance of your releasing it at some point?
|
|
|
|
thew3apon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 03:14:58 PM |
|
I ethereu thanks to the rise of flour, provided it does not increase the difficulty is good. What is the reason for the lack of a new version in a long time ? I reached the border .
|
|
|
|
rpg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 03:53:23 PM |
|
i by mistake cross the PSU wires and fed a Fury X with power from 2 different PSUs. Now it is total dead as a brick, no fans nothing. I bought it on the net second hand and have no RMA for it. I know the Fury has a fuse on each 8 pin connector. Would the different phases cause the fuses to blow?
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 04:02:10 PM |
|
Actually, if you run the AMDGPU-PRO drivers, you CAN mix them in a rig. The Fiji card may perform slightly worse than with fglrx, but it works.
Since AMDGPU Pro drivers only support GCN3 or newer cards, I couldn't get it to work with my Pitcarin and RX 480 rig on Arch Linux. I had to switch to Windows 7 to be able to use all my cards https://wiki.archlinux.org/index.php/Xorg#AMD
|
|
|
|
moiraine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 04:08:49 PM |
|
some cards do not display vrm temps. but if the core is cool, chances are the vrms are ok also.
Please don't give people who don't know any better terrible advice like that - I was mining on my linux dev/test rig, Naomi, just a day ago, and had strange crashes when core was under 70C. I used one of my tools to check the temps on the VRM controller feeding the core - it was over 106C. Also, I assume that under Windows, the tools you guys have should show VRM temps on all cards except those with an NCP81022 feeding the core - because I can't get temps off it either; cheap piece of shit has no sensor. ok, i will take your word for it. edited my post above to strike out that line. guess ive been lucky. what tools do you use? As I said, I wrote them myself - the closest analog to what I'm working on and polishing is WattTool for Windows, I think. Allows you to see VRM temps, set/get voltages, set/get offsets, change VRM switching frequency, and more - but WattTool can only give you this control over IR3567B and compatible VRM controllers. Mine supports four controllers that are used in AMD cards as main controllers (and sometimes this main controller is used for other purposes in the card besides core volts - for example, XFX RS 470/480 cards use the NCP81022's main output (VDD) for core (duh) but use the other one (VDDNB) for the IMC voltage (VDDCI.)) I've also added basic support for one controller that's more of a secondary one, which I found on my DirectCU II 290X. It controls MVDDC. Are you doing this all via i2c commands on linux? I've been digging a bit but cant seem to get a i2cdump anywhere near what I get with aida under windows, so I don't even know where to start :/. Also, how are you checking that the vddci is getting set on those ncp81022 cards? afaik there's no sensor, so are you manually checking em? How
|
|
|
|
Vivlore
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 04:51:27 PM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org). I tried several pools. flypool is the best. I also use flypool.
|
|
|
|
Vann
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 04:58:25 PM |
|
Actually, if you run the AMDGPU-PRO drivers, you CAN mix them in a rig. The Fiji card may perform slightly worse than with fglrx, but it works.
Since AMDGPU Pro drivers only support GCN3 or newer cards, I couldn't get it to work with my Pitcarin and RX 480 rig on Arch Linux. I had to switch to Windows 7 to be able to use all my cards https://wiki.archlinux.org/index.php/Xorg#AMDThe support is labeled "experimental" but it IS there. The "experimental" support for GCN1 and 2 cards is for the open-source AMDGPU driver, which doesn't support AMD APP-SDK OpenCL for mining. The proprietary Catalyst drivers on Linux don't support the Polaris cards and the proprietary AMDGPU PRO drivers only support GCN3 and up cards. The Catalyst ReLive drivers on Windows do support GCN1 and up cards.
|
|
|
|
haxiboy
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 07:25:48 PM |
|
Hello @Claymore,
I have problem with rx 480 and r9 nano running together. I tried driver from 16.9.2 to 17.5.2 without success. R9 nano is not wotking with default settings, but it give 340 H/s with -asm 0 -a 2. When I use 15.12 driver without rx 480, it give 430 H/s.
Can you please advice in this case? log:
07:19:38:306 cb4 args: -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3 -di 0 -ttli 71 -mport 0 07:19:38:322 cb4 07:19:38:322 cb4 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 07:19:38:322 cb4 є Claymore's ZCash AMD GPU Miner v12.4 є 07:19:38:322 cb4 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 07:19:38:322 cb4 07:19:38:541 cb4 ZEC: 1 pool is specified 07:19:38:541 cb4 Main ZCash pool is eu1-zcash.flypool.org:3443 07:19:39:010 cb4 OpenCL platform: AMD Accelerated Parallel Processing 07:19:39:025 cb4 OpenCL initializing... 07:19:39:041 cb4 driver 10.0.2348.3 07:19:39:041 cb4 AMD Cards available: 1 07:19:39:041 cb4 GPU #0: Fiji, 4096 MB available, 64 compute units 07:19:39:041 cb4 GPU #0 recognized as Fury X/Nano 07:19:39:041 cb4 POOL version 07:19:39:041 cb4 b555 07:19:39:041 cb4 Platform: Windows 07:19:39:291 cb4 start building OpenCL program for GPU 0... 07:19:39:291 cb4 done 07:19:40:072 cb4 GPU #0 algorithm ASM, intensity 6 07:19:40:072 cb4 Total cards: 1 07:19:53:728 cb4 Watchdog enabled 07:19:53:728 cb4
07:19:53:744 b38 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443 (SSL/TLS) 07:19:54:010 b38 cert subject: /OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org 07:19:54:010 b38 cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA 07:19:54:010 b38 SSL/TLS encryption is enabled 07:19:54:025 b38 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "eu1-zcash.flypool.org", "3443"]}
07:19:54:025 b38 send: {"id": 2, "method": "mining.authorize", "params": ["t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3",""]}
07:19:54:025 b38 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
07:19:54:025 b38 ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS) 07:19:54:119 b38 got 62 bytes 07:19:54:119 b38 buf: {"id":1,"result":["01a897f7c8", "01a897f7c8"], "error": null}
07:19:54:119 b38 parse packet: 58 07:19:54:119 b38 new buf size: 0 07:19:54:197 b38 got 38 bytes 07:19:54:197 b38 buf: {"id":2,"result":true, "error": null}
07:19:54:197 b38 parse packet: 35 07:19:54:197 b38 ZEC: Authorized 07:19:54:197 b38 new buf size: 0 07:19:54:197 b38 got 119 bytes 07:19:54:197 b38 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}
07:19:54:213 b38 parse packet: 118 07:19:54:213 b38 Pool sets new share target: 0x00083126 (diff: 8000H) 07:19:54:213 b38 new buf size: 0 07:19:55:197 b38 got 310 bytes 07:19:55:197 b38 buf: {"id":null,"method":"mining.notify","params":["95c778c1224b3450cc69","04000000","dad1db62573444c6f48a7dc40b65b5c1b5664ca19a1f981fec5cba5300000000","90e86915accf9daf92abe61fabf7a57982e872cf2debf4d3a046b047f38e6915","0000000000000000000000000000000000000000000000000000000000000000","65502059","e096531c",true]}
07:19:55:197 b38 parse packet: 309 07:19:55:197 b38 new buf size: 0 07:20:23:885 cb4 GPU0 t=57C fan=37% 07:20:23:900 cb4 em hbt: 0, fm hbt: 94, 07:20:23:900 cb4 watchdog - thread 0, hb time 172 07:20:23:900 cb4 watchdog - thread 1, hb time 94 07:20:23:900 cb4 watchdog - thread 2, hb time 0 07:20:23:900 cb4 watchdog - thread 3, hb time 266 07:20:54:056 cb4 GPU0 t=57C fan=38% 07:20:54:072 cb4 em hbt: 0, fm hbt: 78, 07:20:54:072 cb4 watchdog - thread 0, hb time 23797 07:20:54:072 cb4 watchdog - thread 1, hb time 23703 07:20:54:072 cb4 watchdog - thread 2, hb time 23609 07:20:54:072 cb4 watchdog - thread 3, hb time 23516 07:21:24:235 cb4 GPU0 t=57C fan=37% 07:21:24:235 cb4 em hbt: 0, fm hbt: 78, 07:21:24:251 cb4 watchdog - thread 0, hb time 53984 07:21:24:251 cb4 watchdog - thread 1, hb time 53890 07:21:24:251 cb4 watchdog - thread 2, hb time 53796 07:21:24:251 cb4 watchdog - thread 3, hb time 53703 07:21:54:407 cb4 GPU0 t=57C fan=37% 07:21:54:407 cb4 em hbt: 0, fm hbt: 63, 07:21:54:422 cb4 watchdog - thread 0, hb time 84156 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 1, hb time 84062 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 2, hb time 83968 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:438 cb4 watchdog - thread 3, hb time 83875 07:21:54:438 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:55:985 cb4 Restarting OK, exit...
u can't mix r9 nano with rx480 in 1 rig... that's because driver not compatible in claymore software.... u can mix r9 nano only with 390 or 390x. You can mix with 17.1.1 works well for me.
|
|
|
|
homi4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2017, 07:37:05 PM |
|
You can mix with 17.1.1 works well for me.
What is windows version? I use win 7. rx 480 and r9 nano work nice together in etherium mining 9.3 Do you get 430-450 H/s for r9 Nano in mix mode with rx 480 for 17.1.1 driver ?
|
|
|
|
|