Swedish ASIC miner company kncminer.com

[bobsmoke]

My order is #601 New, I cannot see any 1-500 does that mean my order is actually #1101?

It's probably much higher than that brother.  I recall a few days ago BEFORE they opened up the site to pay for your orders that the pre-orders were getting up into the 5000-6000 range.  So add that plus your 601 new order and you're pretty far back in line unfortunately.

So if I have a #4*** preorder and a #4** order (not payed yet) is it better to pay the #4** order now or wait that kncminer will open payments for preorder # higher than 500?
This is not clear..

The info I got from KncMiner: the sooner you pay the better....but I would recommend you to send a quick note to them with your questions. They have been answering significantly fast!

[1714063052]

1714063052

[1714063052]

1714063052

[1714063052]

1714063052

[LiteBit]

My order is #601 New, I cannot see any 1-500 does that mean my order is actually #1101?

It's probably much higher than that brother.  I recall a few days ago BEFORE they opened up the site to pay for your orders that the pre-orders were getting up into the 5000-6000 range.  So add that plus your 601 new order and you're pretty far back in line unfortunately.

So if I have a #4*** preorder and a #4** order (not payed yet) is it better to pay the #4** order now or wait that kncminer will open payments for preorder # higher than 500?
This is not clear..

Your preorder number is #4*** and you can pay that anytime once you create a new order (as you did with the new #4**).  The new number #4** does not matter.  Once you placed that new order number you have 7 days to pay and that will solidify your spot at #4*** (your pre-order number).  If you fail to pay within 7 days you loose #4*** spot and fall to the back of the line.

[1krona]

Do anyone have any idea why the Paypal payments are getting error messages?

My Paypal account is verified and I try to make a payment for 1 jupiter 8700 $ but i get the error-message "We're sorry, but we can't send your payment right now".
I´ve sent a mail to Paypal but I haven´t received an answer yet.

This is the second time i try to send the payment. It was the same way about 12 hours ago.

[RayG]

Typing a few words to get <500 position few months ago and now selling the spot. Probably the most lucrative job in history...

[pizza]

I wish I had the money to buy all of my 1-500 pre orders up than in 2 months from now sell them for 20-40K haha.

[DPoS]

after 7 days, they will toss out all the pre-regs that didn't pay

then you will see where you really stand.

some might sneak into the top 500 but I do not know their system

[Vega]

after 7 days, they will toss out all the pre-regs that didn't pay

As of this morning I was the 1085th who payed, so I wouldn't expect too many open slots, or even unclaimed pre-reg spots.

[Henchman24]

This whole deal still smells way too fishy for me.   

I'm anxious to hear from the people who attended the open house.

[kevinm]

Bank Wire Transfer requires Acc Name & Bank Name amongst other info.
This info not given on payment page on KNC Mining website.

Bank is:              SEB = Stockholm Enskilda Bank
Acc Name is:       KNCMINER AB

My order is #601 New, I cannot see any 1-500 does that mean my order is actually #1101?

cheers,
Kev

It's probably much higher than that brother.  I recall a few days ago BEFORE they opened up the site to pay for your orders that the pre-orders were getting up into the 5000-6000 range.  So add that plus your 601 new order and you're pretty far back in line unfortunately.

Wow thanks for that  

[DeaDTerra]

I visited KnCMiners HQ today, it was the main office in stockholm for OrSoc.
I have to say that they were very nice and answered any questions we had.
They acted very professional and seemed like a legitimate business.
Several people documented both with video and audio so the session should soon be up online and you can make your own conclusions.
I just want to say thank you KnCMiner for a great time
//DeaDTerra

[Bitcoinorama]

I visited KnCMiners HQ today, it was the main office in stockholm for OrSoc.
I have to say that they were very nice and answered any questions we had.
They acted very professional and seemed like a legitimate business.
Several people documented both with video and audio so the session should soon be up online and you can make your own conclusions.
I just want to say thank you KnCMiner for a great time
//DeaDTerra

Spot on, but keep it coming, more details please...anything on timescales of milestones?

Was there a Gantt chart shown of what they expect to have done, and by when??

Also 'nice' is such a plain, non-expressive word, you can do better than this!

[bitminer2049er]

Will the video be on you tube or in another location?

[titomane]

I have low orders for sale 4x for 2btc & 11x 1btc https://bitcointalk.org/index.php?topic=226011.0


Thanks

[KSV]

Will the video be on you tube or in another location?

a video will be good.

[RHA]

36 hours later, I have an incoming email from KNC:

Hi

The Miners are on schedule for September delivery and you can ask for a refund anytime up to the day of shipment.

Sam Cole  
Kncminer

This is against the Terms and Conditions p. 8.1 (https://www.kncminer.com/pages/tandc):

The Purchaser is not entitled to refuse acceptance of the Products, withdraw, cancel or revoke the order or make claims for compensation due to any delayed delivery.

Has that contradiction been clarified at the meeting?

[gateway]

Think they will need to update the web page because I was also wondering about refund policy..

[DeaDTerra]

I visited KnCMiners HQ today, it was the main office in stockholm for OrSoc.
I have to say that they were very nice and answered any questions we had.
They acted very professional and seemed like a legitimate business.
Several people documented both with video and audio so the session should soon be up online and you can make your own conclusions.
I just want to say thank you KnCMiner for a great time
//DeaDTerra

Spot on, but keep it coming, more details please...anything on timescales of milestones?

Was there a Gantt chart shown of what they expect to have done, and by when??

Also 'nice' is such a plain, non-expressive word, you can do better than this!

heheh xD
As I said everything was recorded and I think video makes a better media then my words.
They said that basically the design and all of that with the chip was done and that the backend work at the fab would begin this week.
They were on time and believed strongly that they will be able to meet their goal of September.
That's true, okay they seemed very genuine, it seemed like they had done these type of operation before or at least at this scale.
They could answer any questions we had and also showed us some of the FPGA/ASICs that ORSoC had designed previously, let's just say they were a lot more complicated then just calculating some hashes xD
//DeaDTerra

[Bitcoinorama]

Think they will need to update the web page because I was also wondering about refund policy..

Yeah T&Cs were written up by a lawyer, Sam appears to have said something different. Will have to find out about that...

[ryanb]

i registered an account and placed an order for bank transfer

but i cannot seem to be able to log in

[Bitcoinorama]

I visited KnCMiners HQ today, it was the main office in stockholm for OrSoc.
I have to say that they were very nice and answered any questions we had.
They acted very professional and seemed like a legitimate business.
Several people documented both with video and audio so the session should soon be up online and you can make your own conclusions.
I just want to say thank you KnCMiner for a great time
//DeaDTerra

Spot on, but keep it coming, more details please...anything on timescales of milestones?

Was there a Gantt chart shown of what they expect to have done, and by when??

Also 'nice' is such a plain, non-expressive word, you can do better than this!

heheh xD
As I said everything was recorded and I think video makes a better media then my words.
They said that basically the design and all of that with the chip was done and that the backend work at the fab would begin this week.
They were on time and believed strongly that they will be able to meet their goal of September.
That's true, okay they seemed very genuine, it seemed like they had done these type of operation before or at least at this scale.
They could answer any questions we had and also showed us some of the FPGA/ASICs that ORSoC had designed previously, let's just say they were a lot more complicated then just calculating some hashes xD
//DeaDTerra

Perfect, again muchos gracias for your time and honesty!

Best wishes, A.