AMD Rebrand - RX570 / RX580 - Official Thread

[hselek]

RX580 Sapphire Nitro+ 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx
RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx

Maybe not all cards can be undervolted -75mv OR maybe more then -75mv

Strap copied to 2:1750, 2:2000, 2:2250:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
here is a blank, check you copy all without the blank (forum changes it?)

ETH: 30.1 - 30.3   -   100% Stable, 0 Errors, about 2 weeks



Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs.
Other straps got me lower MH on memory overclock or blackscreens and artefacts

When I do exactly this, I get "Invalid HEX String" from polaris bios editor.After that it crashes but saves the file (0 byte file). Is it the same with you guys too or is it just me ?

First copy strap into notepad and delete white space, there is one white space in HEX string. Maybe that is a problem.

Thank you. Doing this I was able to save it...

[budiselich]

Guys, on my bios higher frequency is 2000. I haven't 2050 or 2100. Is there a way to add it or it isn't necessary?

https://i.imgur.com/qnZLJIR.jpg

Give us more details about your graphic card.

[hselek]

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.

http://imgur.com/a/WE8xX

Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

[budiselich]

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.

http://imgur.com/a/WE8xX

Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

Try this Polaris BIOS Editor

https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b

[hselek]

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.

http://imgur.com/a/WE8xX

Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

Try this Polaris BIOS Editor

https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b

I used this one.

[papi92]

Guys, on my bios higher frequency is 2000. I haven't 2050 or 2100. Is there a way to add it or it isn't necessary?

https://i.imgur.com/qnZLJIR.jpg

Give us more details about your graphic card.

I forgot... Sapphire Pulse RX 580 4GB

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.



Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

Try this Polaris BIOS Editor

https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b

I used this one.

Try to remove old drivers with DDU and then fresh install.

[2econd]

Phew... Well here I am. Been messing with my very first rig for a week and a half now, sleeping about 5 hours a night trying to get things going smoothly. And I guess it's about time to stop lurking and ask for help.

Running 4 MSI 580 Gaming X+ (I read the X+ meant it was tested to perform well under lower voltages). Samsung memory.

I've tried about every strap combination thinkable, all were horrible. Except for the custom mod which I placed in :1750 and :2000 (Polariseditor only shows on batch of strings, so I couldn't have placed it wrong).
Finally I was able to hit 30,5 Mh/s with Claymore, dual mining perhaps 27 Mh/s. The precise settings for this... I've regrettably forgotten after countless hours of messing with MSIAfterburner (back to 29,5). Not sure if my nerves can handle more system shutdowns (won't those hurt the cards?)

Power draw however remained horrible in comparison to what I read here. 125 watt (afterburner) is what I draw mining Ether alone. Dual mining Eth/Sia and up up up it goes.

Even when I move the cards all the way -100mV in with afterburner, they simply won't consume less. Trixx I hardly dare touch anymore, using the voltage slider just a bit seems to kill the system immediately.

So my question is, what am I missing? Or does someone have a rom I could use for these cards / Settings they use on the same cards?

Full disclosure
Relive 17.5.2
GA-970A-UD3P (I brought my old computer back to live)
X4 955 Phenom

Thanks in advance!

[botarnold]

Hi, thanks for info, this strap and frequencies also worked for me (RX580 Sapphire Nitro+ 8GB Hynix).

I went little bit further and set Core Clock to 1204MHz and Memory Clock at 2200MHz, voltage -74mV.

Now getting 31.0 - 31.1

https://i.imgur.com/KPvsPHo.jpg

I'm not sure if 2200Mhz makes difference compare to 2100 for this performance timmings...
I would prefer lower it'll be more stable and also less heat...

Turn up your fans to 50% will do the job

[2econd]

[/quote]

I've heard from several people now that the uP9505P can't yet be controlled by MSI AB... I wonder if I implemented voltage support for it before MSI did 
[/quote]

Ouch, I read what you wrote on Reddit earlier (I wasn't joking about not sleeping) but didn't quite understand, only the Linux part and I'm running Windows

I guess I have to sit it out then, wait on afterburner or someone else?

I hope the Asus ROG-STRIX-RX580-O8G-GAMING will treat me better. 6 are on the way and I couldn't find many (any) miners write about those, yet all other cards are already sold out over here.

Fingers crossed, on both hands

[ciprianpt]

Another problem;

After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.



Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?

PS: I only flashed the card that is identified as Polaris 10

Have you applied the patch ?

[Jdope]

Hey guys, what drivers are you using currently? Im getting an MSI Rx 580 soon and I would like to add it to my rig of RX 480/470 with modded bioses, what drivers shall I install? I'm currently on 16.x

[nateminer723]

Help! Hey Guys... A bit of a noob here, so greatly appreciate any help.

Setting up my 2nd and 3rd rig and decided to go with the RX580... Ended up with XFX RX580 8GB GTS Black Edition

Info on card:
http://xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dbd6

I was only getting 18-19 hash rate out of the box... I can't get it past 20! From what I've read the 580's should be in the high 20's at least.

This was the best I could do... In ethOS I've updated the config...
Core: I've maxed out (according to specs) at 1425.
Memory: 2220

Is there anything else I should try?? Hoping to not have to return 10 GPUs...

[2econd]

Help! Hey Guys... A bit of a noob here, so greatly appreciate any help.

Setting up my 2nd and 3rd rig and decided to go with the RX580... Ended up with XFX RX580 8GB GTS Black Edition

Info on card:
http://xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dbd6

I was only getting 18-19 hash rate out of the box... I can't get it past 20! From what I've read the 580's should be in the high 20's at least.

This was the best I could do... In ethOS I've updated the config...
Core: I've maxed out (according to specs) at 1425.
Memory: 2220

Is there anything else I should try?? Hoping to not have to return 10 GPUs...

You need to figure out what type of memory you have,  GPUZ, then copy paste certain strings or add a custom string with Polaris bios editor. Your clock looks horrible btw, I don't see anyone going past 2200 (most don't go further than 2100, I see thing happening between 1100/2020 and 1300/2200) and core clock should be reduced not increased. You might have a million memory errors running this clock

19 hash rate out of the box however, that's... strangely low. There might be more going on beyond my pitiful knowledge in these matters

[botarnold]

Help! Hey Guys... A bit of a noob here, so greatly appreciate any help.

Setting up my 2nd and 3rd rig and decided to go with the RX580... Ended up with XFX RX580 8GB GTS Black Edition

Info on card:
http://xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dbd6

I was only getting 18-19 hash rate out of the box... I can't get it past 20! From what I've read the 580's should be in the high 20's at least.

This was the best I could do... In ethOS I've updated the config...
Core: I've maxed out (according to specs) at 1425.
Memory: 2220

Is there anything else I should try?? Hoping to not have to return 10 GPUs...

You need to figure out what type of memory you have,  GPUZ, then copy paste certain strings or add a custom string with Polaris bios editor. Your clock looks horrible btw, I don't see anyone going past 2200 (most don't go further than 2100, I see thing happening between 1100/2020 and 1300/2200) and core clock should be reduced not increased. You might have a million memory errors running this clock

19 hash rate out of the box however, that's... strangely low. There might be more going on beyond my pitiful knowledge in these matters

Does memory errors really affect mining performance? I have 3 Msi 580 Armor 8Gs with Samsung memory that Ive been struggling to push it above 30mh without 2200mhz memory. I have copied 1:1750 straps to 1:2000. Currently doing 1250/2200 and it gives me 30.5mh, even though it is giving me like 10-50k memory errors/min. Power consumption is like 87W from GPUZ and around 140W combining the two values in HWinfo. Is my power consumption good? I can't get it below 0.938v though.

[papi92]

After a lot of reading in forums and a thousand unsuccessful bioses I made a bios for Sapphire Pulse RX 580 4GB(Hynix): 30.8-31.3 ETH and 430-410 SC on dual with 120-130W on GPU-Z; Core clock: 1167; Mem Clock: 2150; Driver: 17.5.2. On single is 30.9-31.3 on 80-90W. Stable since 14 hours on two rigs.
Photos: https://[Suspicious link removed]/photos/Zp6jBJhKpCb4so1a72

Has anyone something better for this card?

[blue1984]

Hello,


it is also possible to set the Voltage offset in the Firmware like on the 470 (HEX Editor)?
someone try it?

lg Martin

[Mattthev]

Does memory errors really affect mining performance? I have 3 Msi 580 Armor 8Gs with Samsung memory that Ive been struggling to push it above 30mh without 2200mhz memory. I have copied 1:1750 straps to 1:2000. Currently doing 1250/2200 and it gives me 30.5mh, even though it is giving me like 10-50k memory errors/min. Power consumption is like 87W from GPUZ and around 140W combining the two values in HWinfo. Is my power consumption good? I can't get it below 0.938v though.

http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Find performance timings and use Uber Mix 3.1.
The best for Samsung memory. I'm mining XMR and this gave me 850h/s instead of 750h/s also with lower memory clocks only 2100MHz.

Hey guys, what drivers are you using currently? Im getting an MSI Rx 580 soon and I would like to add it to my rig of RX 480/470 with modded bioses, what drivers shall I install? I'm currently on 16.x

The newest one, but I'm mining XMR so it depends... I'm not sure if RX 5xx is working with 16.x versions.

[SylenZ]

Hi! I've just bought a Gigabyte RX580 G1 Gaming 4GB (Hynix). I get around 22-23 mhs on stock (24,5 with 2100 memory clock). After I copied the 1750 timing to 2000 I get 26-27 mhs. It has a really high power consumption (140-150w) and I can't get more than 1100 mhz core clock. I've set it to 1200 mhz in afterburner and it's still running on 1050-1100 unless I change the power limit to 155-165w (+10-15%). Any suggestion how can I increase my hashrate/lower the power consumption?

[2econd]

@Mattthev,

Did you paste the uber mix in both 1750 and 2000 as I did?
I wonder if keeping the original 1750 might be better.

My only problem is voltage/power consumption. But that seems to be a current issue with the MSI X+ gaming cards, sadly.

Dual mining is poor too, about 25 hashes if I lower power consumption to 150/160 per card. Mining only Ether 30+ hashes is 'easy' with the uber mix.

[Mattthev]

@Mattthev,

Did you paste the uber mix in both 1750 and 2000 as I did?
I wonder if keeping the original 1750 might be better.

My only problem is voltage/power consumption. But that seems to be a current issue with the MSI X+ gaming cards, sadly.

Dual mining is poor too, about 25 hashes if I lower power consumption to 150/160 per card. Mining only Ether 30+ hashes is 'easy' with the uber mix.

No only to 2000. I have RX 480 Asus Dual 8GB it has standard 8000MHz clock. Also it's safer if something goes wrong with the timing it will only crash when the memory is on the max. If you have 7000MHz so you are totaly fine only if you overclock it may crash.
I don't have MSI, now I'm using only Asus Dual and Asus Strix - the dual is very cheap but Strix have much better cooling. Also neither of them have memory cooling so it's better use performance timings instead of higher clocks.
I suppose you have RX 5xx series? They have bad TDP you can try lower it in bios. Or unlock voltage control in Afterburner or whatever you use and try -50mV. Asus Dual can go to max -100mV (the max I can downvolt, it need bios mod I think). The MSI Afterburner shows after lowering voltages and overclock 1350MHz/2100MHz use only about 80-90W I think I said max TDP to 120W in bios.