dmitrik
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 06:09:12 AM |
|
On stock vega 56s (stock bios), what are the best wattman settings without the reg edits? I've been messing around with some of my cards and while some handle 950Mhz well, one of the cards can barely stay stable at 920. Most of the other settings are all dynamic, but I'd like to change that.
Thanks.
GPU Freq: -30 Mem Freq: 950 Mhz Set your fan to manual and @3000 rpm min Powerlimit -20% You should get around 1800hs on cryptonight coins and 39+MHS on Eth and be stable at around 50 degrees on an air cooled card Thanks, that's pretty much what I have, except my powerlimit is at +15% (and I've been playing with maxing it out to +50% with only a 10-20 hash rate/s increase). Doesn't seem to be worth it. Running right now at +5% and getting solid 2k hashrate (48 hours stable now) on Gigabyte cards. Sapphire, however, freezes up when set to 950MHz, had to scale it down to 910Mhz, and it's hashing 1920 h/s stable. All cards are running at 65C though, not 50s when ambient temp is about 20-22C. Fan speeds are at 2k min, current at 3.3k all of them.
|
|
|
|
Duykhang
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 06:51:24 AM |
|
Hi guys, I need a little advice I flashed my Vega 56 to 64 and applied the 1050hbm reg file. I tried changing the GPU core and voltage in overdrive. I can’t find any config that keeps it stable. My mem is stable but I can’t get the core to stabilize. My most stable was 1480/980mv for core and 1080/900mv for hbm.
There are 2 indicators that make me believe that my gpu is not stable. 1. The lights near the 8 pins are flashing every few seconds. 2. In GPUz at sensor page when you look at the core clock graph it keeps fluctuating.
At every fluctuation Hashrate instantly drops to 1400-1600 and comes back to 1800+
It seems that I need to mod the SOC clock to be higher than 1107 but I can’t seem to mod the reg files.
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 07:03:03 AM |
|
Hi guys, I need a little advice I flashed my Vega 56 to 64 and applied the 1050hbm reg file. I tried changing the GPU core and voltage in overdrive. I can’t find any config that keeps it stable. My mem is stable but I can’t get the core to stabilize. My most stable was 1480/980mv for core and 1080/900mv for hbm.
There are 2 indicators that make me believe that my gpu is not stable. 1. The lights near the 8 pins are flashing every few seconds. 2. In GPUz at sensor page when you look at the core clock graph it keeps fluctuating.
At every fluctuation Hashrate instantly drops to 1400-1600 and comes back to 1800+
It seems that I need to mod the SOC clock to be higher than 1107 but I can’t seem to mod the reg files.
I have the same issue with one of my vegas too
|
|
|
|
Quubik
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 07:41:57 AM |
|
So I'm bad luck then, I have 4 gigabyte vega 56. Overclocking SOC to 1200 not working stable, miner stops working, miner freezes, pc freezes. Tried setting those numbers from C0,D4,01 to 38,C1,01 (for 1,15Ghz) but no luck SOC stays 1200 (1999). Increased Voltage for both GPU and memory, it works like stable, get about 2% more h/s but get about 12% compute error, which I never seen before.
In the end I really dont even care about the extra 50h but I'm curious why the fck it does not work on Gigabytes. Identical cards. Works like a charm on Sapphires on high mhz and low voltages. Does not work at all on Gigabytes. On GB cards I can get the SoC to work on 1200mhz with my own reg files but then I am limited to 950mv minimum. What gives ? Did you use Gigabyte BIOS files? No' used generic AMD but they should be all exactly the same. Will try one tosay just to be sure. What limits your own reg file to 950mv? To be honest - I dont know. Just wont work below that. It's a mystery to me why Rednows works on some cards as well. I can tell what 30% of the entries in PowerPlay do. Rest is still a mystery and never had the time to really dig into it. If I get the time I might start to compare Rednows differences in the reg.
|
|
|
|
ninjam
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 08:36:00 AM |
|
Anyone using new all-in-one xmr-stak? I have compiled it, but with disabled CPU and Nvidia backend. Getting about 100h/s less per vega 56, compared to old xmr-stak-amd when using same intensity for threads.
|
|
|
|
Rampage89
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 09:45:53 AM |
|
Anyone using new all-in-one xmr-stak? I have compiled it, but with disabled CPU and Nvidia backend. Getting about 100h/s less per vega 56, compared to old xmr-stak-amd when using same intensity for threads.
What stak config do u use?
|
|
|
|
ninjam
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 10:20:01 AM |
|
for xmr-stak-amd: "gpu_threads_conf" : [ { "index" : 0, "intensity" : 2016, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 0, "intensity" : 1736, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 1, "intensity" : 2016, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 1, "intensity" : 1736, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 2, "intensity" : 2016, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 2, "intensity" : 1736, "worksize" : 8, "affine_to_cpu" : false }, ], as sugested by hellae on Redit. Getting on average 1925H/S When using autoconfig for xrm-stak (aio) I get about 2500h/s total for 4 cards. When using above config in xrm-stak I get about 1800h/s per card. By trial and error, managed to get 7600 (+- 10) H/s using this config { "index" : 0, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 0, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 1, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 1, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 2, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 2, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 3, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false }, { "index" : 3, "intensity" : 1960, "worksize" : 8, "affine_to_cpu" : false },
Have not tested it for longer periods, so I don't know if its stable. But still less than older version.
|
|
|
|
Quubik
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 06:42:28 PM |
|
So I'm bad luck then, I have 4 gigabyte vega 56. Overclocking SOC to 1200 not working stable, miner stops working, miner freezes, pc freezes. Tried setting those numbers from C0,D4,01 to 38,C1,01 (for 1,15Ghz) but no luck SOC stays 1200 (1999). Increased Voltage for both GPU and memory, it works like stable, get about 2% more h/s but get about 12% compute error, which I never seen before.
In the end I really dont even care about the extra 50h but I'm curious why the fck it does not work on Gigabytes. Identical cards. Works like a charm on Sapphires on high mhz and low voltages. Does not work at all on Gigabytes. On GB cards I can get the SoC to work on 1200mhz with my own reg files but then I am limited to 950mv minimum. What gives ? Did you use Gigabyte BIOS files? No' used generic AMD but they should be all exactly the same. Will try one tosay just to be sure. What limits your own reg file to 950mv? To be honest - I dont know. Just wont work below that. It's a mystery to me why Rednows works on some cards as well. I can tell what 30% of the entries in PowerPlay do. Rest is still a mystery and never had the time to really dig into it. If I get the time I might start to compare Rednows differences in the reg. Fixed the offsets today and also tried Gigabytes own bios.Still no go. Took a look at the bioses from different AIBs. They are actually different Also BTW !!! The newest drivers dont include a PowerPlayTable in the registry. Kind a bad news for the long run ![Cry](https://bitcointalk.org/Smileys/default/cry.gif)
|
|
|
|
nani202
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 08:06:57 PM |
|
guys what do you think about this setup ? (i'm willing to update to 4 gpu's) : ASRock H81 PRO I3 2100 2x SAPPHIRE RX VEGA 64 8G HBM2 (willing to add 2 more vega later) THERMALTAKE SMART-SE 730W Modular 80Plus Bronze (i'll add a second one whene i add 2 more vega later) 8gb RAM SSD 120gb
|
|
|
|
Njeroe
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 09:26:45 PM |
|
guys what do you think about this setup ? (i'm willing to update to 4 gpu's) : ASRock H81 PRO I3 2100 2x SAPPHIRE RX VEGA 64 8G HBM2 (willing to add 2 more vega later) THERMALTAKE SMART-SE 730W Modular 80Plus Bronze (i'll add a second one whene i add 2 more vega later) 8gb RAM SSD 120gb
The motherboard is not compatible with that i3 2100, look for an LGA 1150 socket processor and that PSU is just bad, look for a gold eg. EVGA SuperNOVA G3 750W 80 Plus Gold Modular
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 09:31:23 PM |
|
guys what do you think about this setup ? (i'm willing to update to 4 gpu's) : ASRock H81 PRO I3 2100 2x SAPPHIRE RX VEGA 64 8G HBM2 (willing to add 2 more vega later) THERMALTAKE SMART-SE 730W Modular 80Plus Bronze (i'll add a second one whene i add 2 more vega later) 8gb RAM SSD 120gb
The motherboard is not compatible with that i3 2100, look for an LGA 1150 socket processor and that PSU is just bad, look for a gold eg. EVGA SuperNOVA G3 750W 80 Plus Gold Modular Here is a Great psu sale if you are in the usa https://www.evga.com/products/product.aspx?pn=120-G2-1000-XR1000 watts free shipping $109.99 limit 1
|
|
|
|
nani202
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 10:03:31 PM |
|
guys what do you think about this setup ? (i'm willing to update to 4 gpu's) : ASRock H81 PRO I3 2100 2x SAPPHIRE RX VEGA 64 8G HBM2 (willing to add 2 more vega later) THERMALTAKE SMART-SE 730W Modular 80Plus Bronze (i'll add a second one whene i add 2 more vega later) 8gb RAM SSD 120gb
The motherboard is not compatible with that i3 2100, look for an LGA 1150 socket processor and that PSU is just bad, look for a gold eg. EVGA SuperNOVA G3 750W 80 Plus Gold Modular Here is a Great psu sale if you are in the usa https://www.evga.com/products/product.aspx?pn=120-G2-1000-XR1000 watts free shipping $109.99 limit 1 thanks guys ,i'll change the cpu and the psu unfortunately it's too hard to find a good psu in my country ,so i'm asking maybe a psu with certified bronze can do the work ,also i heared that vega gpus need a good amount of ram and a good cpu to run stable ,is that right ?
|
|
|
|
Njeroe
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 11:19:24 PM |
|
guys what do you think about this setup ? (i'm willing to update to 4 gpu's) : ASRock H81 PRO I3 2100 2x SAPPHIRE RX VEGA 64 8G HBM2 (willing to add 2 more vega later) THERMALTAKE SMART-SE 730W Modular 80Plus Bronze (i'll add a second one whene i add 2 more vega later) 8gb RAM SSD 120gb
The motherboard is not compatible with that i3 2100, look for an LGA 1150 socket processor and that PSU is just bad, look for a gold eg. EVGA SuperNOVA G3 750W 80 Plus Gold Modular Here is a Great psu sale if you are in the usa https://www.evga.com/products/product.aspx?pn=120-G2-1000-XR1000 watts free shipping $109.99 limit 1 thanks guys ,i'll change the cpu and the psu unfortunately it's too hard to find a good psu in my country ,so i'm asking maybe a psu with certified bronze can do the work ,also i heared that vega gpus need a good amount of ram and a good cpu to run stable ,is that right ? You can get Vega 64 GPU but no good quality PSU?? anyway, check out this list for PSU http://www.tomshardware.co.uk/forum/id-2547993/psu-tier-list.html , but I wouldn't recommend to put a high end GPU on a bronze efficiency PSU... the cpu doesn't matter for Vegas, you can choose the cheapest you can get, and 8GB RAM is more than enough for GPU mining...btw, that motherboard is DDR3 SDRAM compatible, DDR4 won't fit into it... also I recommend this site for your Vega 64 rig setup https://vegamining.blogspot.com
|
|
|
|
nani202
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 11:36:12 PM |
|
You can get Vega 64 GPU but no good quality PSU?? anyway, check out this list for PSU http://www.tomshardware.co.uk/forum/id-2547993/psu-tier-list.html , but I wouldn't recommend to put a high end GPU on a bronze efficiency PSU... the cpu doesn't matter for Vegas, you can choose the cheapest you can get, and 8GB RAM is more than enough for GPU mining...btw, that motherboard is DDR3 SDRAM compatible, DDR4 won't fit into it... also I recommend this site for your Vega 64 rig setup https://vegamining.blogspot.comthank you so much ,what do you think about this psu THERMALTAKE TOUGHPOWER DPS G RGB 1050W PLATINIUM ? can it handle 4 vega 64 ?
|
|
|
|
Duykhang
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 11:45:29 PM |
|
Hi guys, I need a little advice I flashed my Vega 56 to 64 and applied the 1050hbm reg file. I tried changing the GPU core and voltage in overdrive. I can’t find any config that keeps it stable. My mem is stable but I can’t get the core to stabilize. My most stable was 1480/980mv for core and 1080/900mv for hbm.
There are 2 indicators that make me believe that my gpu is not stable. 1. The lights near the 8 pins are flashing every few seconds. 2. In GPUz at sensor page when you look at the core clock graph it keeps fluctuating.
At every fluctuation Hashrate instantly drops to 1400-1600 and comes back to 1800+
It seems that I need to mod the SOC clock to be higher than 1107 but I can’t seem to mod the reg files.
I finally managed to increase SOC clock, but my gpu clock is still bouncing around. My mem stabilized at 1150 https://m.imgur.com/BDS14YU
|
|
|
|
Njeroe
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 11:56:56 PM |
|
You can get Vega 64 GPU but no good quality PSU?? anyway, check out this list for PSU http://www.tomshardware.co.uk/forum/id-2547993/psu-tier-list.html , but I wouldn't recommend to put a high end GPU on a bronze efficiency PSU... the cpu doesn't matter for Vegas, you can choose the cheapest you can get, and 8GB RAM is more than enough for GPU mining...btw, that motherboard is DDR3 SDRAM compatible, DDR4 won't fit into it... also I recommend this site for your Vega 64 rig setup https://vegamining.blogspot.comthank you so much ,what do you think about this psu THERMALTAKE TOUGHPOWER DPS G RGB 1050W PLATINIUM ? can it handle 4 vega 64 ? Yes, that is a very good PSU, and after mods one Vega 64 pulling about 150W so I would say it can handle 4 Vega...
|
|
|
|
Biodom
Legendary
Offline
Activity: 3878
Merit: 4295
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2017, 02:17:40 AM |
|
Question? Did anybody try to flash vega56 BIOS on VEGA 64? What were the results? I know that it is going in the opposite direction of what people usually do, but my 64 card is slightly noisy plus uses too much power. I hope to tame it with 56 BIOS.
|
|
|
|
Duykhang
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2017, 05:06:39 AM |
|
Hi guys, I need a little advice I flashed my Vega 56 to 64 and applied the 1050hbm reg file. I tried changing the GPU core and voltage in overdrive. I can’t find any config that keeps it stable. My mem is stable but I can’t get the core to stabilize. My most stable was 1480/980mv for core and 1080/900mv for hbm.
There are 2 indicators that make me believe that my gpu is not stable. 1. The lights near the 8 pins are flashing every few seconds. 2. In GPUz at sensor page when you look at the core clock graph it keeps fluctuating.
At every fluctuation Hashrate instantly drops to 1400-1600 and comes back to 1800+
It seems that I need to mod the SOC clock to be higher than 1107 but I can’t seem to mod the reg files.
I have the same issue with one of my vegas too Fixed it by using xmr-stak-amd Vega 56 flashed to 64 @160w 50C 2016/1800 I get 1990h with 1408/920 core 1150/900 mem 1999 soc Running rock solid for the past 4hrs
|
|
|
|
Freddy973
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 163
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2017, 05:39:38 AM |
|
Hi, how much is the price now for one amd vega 56? Which one is the best choice the 56 or the 64? Thanks
|
|
|
|
trillobeat
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2017, 05:59:16 AM |
|
So I'm bad luck then, I have 4 gigabyte vega 56. Overclocking SOC to 1200 not working stable, miner stops working, miner freezes, pc freezes. Tried setting those numbers from C0,D4,01 to 38,C1,01 (for 1,15Ghz) but no luck SOC stays 1200 (1999). Increased Voltage for both GPU and memory, it works like stable, get about 2% more h/s but get about 12% compute error, which I never seen before.
In the end I really dont even care about the extra 50h but I'm curious why the fck it does not work on Gigabytes. Identical cards. Works like a charm on Sapphires on high mhz and low voltages. Does not work at all on Gigabytes. On GB cards I can get the SoC to work on 1200mhz with my own reg files but then I am limited to 950mv minimum. What gives ? Did you use Gigabyte BIOS files? No' used generic AMD but they should be all exactly the same. Will try one tosay just to be sure. What limits your own reg file to 950mv? To be honest - I dont know. Just wont work below that. It's a mystery to me why Rednows works on some cards as well. I can tell what 30% of the entries in PowerPlay do. Rest is still a mystery and never had the time to really dig into it. If I get the time I might start to compare Rednows differences in the reg. Fixed the offsets today and also tried Gigabytes own bios.Still no go. Took a look at the bioses from different AIBs. They are actually different Also BTW !!! The newest drivers dont include a PowerPlayTable in the registry. Kind a bad news for the long run ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) I have 6 bloody Gigabyte Vega 56 flashed to gigabyte air 64 bios the are driving me mad! Two of them managed to run miraculously on Asus x370 board with ryzen 1600 cpu. using oldcomers more power 142 fixed reg , p7:1408/875 P3:1100/850 . have been running for a month now at 1600-1700h, don't bother touching them for any improvement! However, the other bunch of 4 is crashing on everything I throw at them- none of the helae regs work! the Oldcomers one with the working config as used on the x370 board doesn't work! the vegamining.blogspot.sg recipe doesn't work! board is Gigabyte z270p-d3 , g4560 cpu, 16gb ram. 2x Vegas put in the first and third 16x slots. win 10 pro 1703. blockchain driver aug 23 what the hell is wrong with GB Vega 56 batches? I see people I the forum running several of them successfully, used their overdriventool setting, instant crash! Did anyone successfully flash other bios on those damn Gigabytes?
|
|
|
|
|