dragonmike
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 11:05:41 PM |
|
I have successfully run my 6 slot onda for 1 week now. 4x vega56 2x rx570. Hashing at 9200hs steady. Gotta check power though. Max temp on vegas 68C and 60C on 570s. My ambient is 30-34C
EDIT 600w at the wall.
What settings clocks and voltages for the vegas? What hbm temps?
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4228
Merit: 8398
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 11:07:58 PM |
|
Got the case kit from spotswood. Will have it running soon.
All 1070's and 1070 ti evga hybrids
|
|
|
|
Mashy81
Jr. Member
Offline
Activity: 225
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 11:15:50 PM |
|
I have successfully run my 6 slot onda for 1 week now. 4x vega56 2x rx570. Hashing at 9200hs steady. Gotta check power though. Max temp on vegas 68C and 60C on 570s. My ambient is 30-34C
EDIT 600w at the wall.
What settings clocks and voltages for the vegas? What hbm temps? Vegas - stock bios only wattman changes p6 min/max -14% freqency and mem 920-950mhz and -7% power setting and fans 4000rpm. Hbm temp no idea hotest gpu in wattman 69c and coolest 60c. 570s - bios flashed gpu frequency p5 min/max and 1790mhz memory. Thats it I am a noobie so this is the extent of my knowledge. But from what i have seen flashing bios and power table changes not always = better on vegas
|
|
|
|
VyprBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 11:18:07 PM |
|
Got the case kit from spotswood. Will have it running soon.
All 1070's and 1070 ti evga hybrids
Congrats! Always fun to get new toys, and I'm hoping you post some pics soon, I'm excited for ya to see how they come out!
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4438
Merit: 3873
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 11:27:19 PM |
|
Got the case kit from spotswood. Will have it running soon.
All 1070's and 1070 ti evga hybrids
this is the one with mounting for radiators right? 2 rows of 4 rads in back?
|
|
|
|
mc162BCT
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 01:30:59 AM |
|
Once I finalize this bulk auction I'll know better how to proceed right now I'm 3 HOURS AWAY winning far too many GPU auctions but I'm pretty sure I'm gonna stick with the 5 Ti Hybrids and the remains 4 "Non-TI" variants for continuity. Too bad those too are apparently hybrids.
Would you happen have a good ONDA supplier that might be able to ship prior to February delivery?
Seems I'm finding a bunch of the 6 card model but that thing looks like junk no? (Built in processor?)
Lot of bulk to these two potential rigs.
PS. When killed the cheese grater macpro and neutered the mac mini from 4core i7 to dual core models jet the price the same and shortly started soldering the rAM into every machine possible they too lost me as well.
They used to love pro's.
Anyway thanks for the suggestions ;-) MC
|
|
|
|
KaydenC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:28:25 AM |
|
Would you happen have a good ONDA supplier that might be able to ship prior to February delivery?
My Onda shipment is arriving in 9 days and will be selling some for $170 shipped in Asia. If you live outside Asia it might be cheaper to buy direct from alibaba because my shipping costs are high. They should sell you 1 piece.
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4228
Merit: 8398
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 05:02:49 AM |
|
Got the case kit from spotswood. Will have it running soon.
All 1070's and 1070 ti evga hybrids
this is the one with mounting for radiators right? 2 rows of 4 rads in back? Yes it is I will use a mix of 1080 tis And 1070 tis All hybrids Most likely 7 cards not eight
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 03:29:09 PM |
|
I was about to trash my D3 into the South China seas..... but with DASH this good - all the cubes are hashing away mining DASH.
Isn't DeepOnion the coin to be mining on Baikals? Bitmain D3 only does X11 coins. DeepOnion uses X13 like Bitcoin Diamond. Older Baikal models like Minis, Quad and 900MH Giants can do X13 in addition to X11, Qubit, Quark etc. The newer Baikals like X10 doesnt support X13 algos. What are the thoughts on the Baikal Giant B?
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
Daaaveee
Jr. Member
Offline
Activity: 48
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 03:38:58 PM |
|
I got 2 miner crashes that needed to be manually restarted.
Also I call bullshit on the algo switching, I made less with the multi algo switching that mining straight lyrarev2.
I did a full 24 hour test run and calculated the BTC per Mh/s -
Sniffdog was only .005 mBTC/Mh/s which came out to .0021 BTC for 400 MH/s - now according to the profit switcher, ever single coin was always over $45-70/day so MINIMUM earned should have been 0.0031 BTC which it failed miserably.
Cool program and all, but profit switching 100% did not work to increase profits, it actually decreased them by 30%
Interesting findings. Currently using Nemos on 2 rigs and I'm not seeing the expected profits either.
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4228
Merit: 8398
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:04:31 PM |
|
I got 2 miner crashes that needed to be manually restarted.
Also I call bullshit on the algo switching, I made less with the multi algo switching that mining straight lyrarev2.
I did a full 24 hour test run and calculated the BTC per Mh/s -
Sniffdog was only .005 mBTC/Mh/s which came out to .0021 BTC for 400 MH/s - now according to the profit switcher, ever single coin was always over $45-70/day so MINIMUM earned should have been 0.0031 BTC which it failed miserably.
Cool program and all, but profit switching 100% did not work to increase profits, it actually decreased them by 30%
Interesting findings. Currently using Nemos on 2 rigs and I'm not seeing the expected profits either. it is chasing the hot coin = bad. and if you are mining on pools that kill you when you jump you lose the work . Say you have 500 shares of coin x work on pool 1. say 10 minutes worth. hot coin comes up you jump. many pools kill your work when you jump so those 500 shares or 10 minutes of work are lost. NOW make a jump every hour chasing the hot coin you may lose your last 5 or 10 minutes of work on every jump even worse if the pool is making 1 block an hour and you jump 24 times in a day. you could lose 50% of your work. Since each coin you jump to makes 1 coin an hour chances are a large loss of time can happen.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4438
Merit: 3873
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:23:24 PM |
|
it is chasing the hot coin = bad.
and if you are mining on pools that kill you when you jump you lose the work .
Say you have 500 shares of coin x work on pool 1. say 10 minutes worth.
hot coin comes up you jump. many pools kill your work when you jump so those 500 shares or 10 minutes of work are lost.
NOW make a jump every hour chasing the hot coin you may lose your last 5 or 10 minutes of work on every jump even worse if the pool is making 1 block an hour
and you jump 24 times in a day. you could lose 50% of your work. Since each coin you jump to makes 1 coin an hour chances are a large loss of time can happen.
this is true for many pools but i would think that mininghubpool (for example) would choose pools that straight up pay per share and allow one to come and go at will without affecting payouts. even still i have limited my various workers on mhp to one algo (based on the gpus, amd RXs on one 1070/1070ti on another, 1080ti on a third) and let mhp switch pools which use that algo. as a strategy that might turn out ok, or it may suck. ill let it go a week or so and see what happens.
|
|
|
|
bdiddle
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 75
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:38:55 PM |
|
Sniffdog was only .005 mBTC/Mh/s which came out to .0021 BTC for 400 MH/s - now according to the profit switcher, ever single coin was always over $45-70/day so MINIMUM earned should have been 0.0031 BTC which it failed miserably.
Cool program and all, but profit switching 100% did not work to increase profits, it actually decreased them by 30%
Which pools were you using, and what switch time? I think the default of 90 seconds is too low, I set mine to 5 minutes. Also limited to only hashrefinary or ahashpool.
|
|
|
|
dragonmike
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 05:00:40 PM |
|
I'm thinking of fixing some fans behind the Vegas to push some air between them (plugged onto that Onda D1800, the six Vegas are very close and heating eachother up). What should I go for? Scythe Slip Stream seem to have the best airflow... Will 3x 120mm do the trick?
|
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 07:12:18 PM |
|
I was about to trash my D3 into the South China seas..... but with DASH this good - all the cubes are hashing away mining DASH.
Isn't DeepOnion the coin to be mining on Baikals? Bitmain D3 only does X11 coins. DeepOnion uses X13 like Bitcoin Diamond. Older Baikal models like Minis, Quad and 900MH Giants can do X13 in addition to X11, Qubit, Quark etc. The newer Baikals like X10 doesnt support X13 algos. What are the thoughts on the Baikal Giant B? its quite good actually since they can do firmware upgrade for 5 more coins - if not mistaken (or was that X10?) this will ensure that the investment will be able to mine additional coins in future very clever of Baikal to do a FPGA approach instead of single-algo asics
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 08:28:44 PM |
|
I don't generally bother chasing "hot coins" any more - I let other folks chase them and crash the profitability back down to where the non-hot coins are at.
9-)
Anyone else notice that AMD card pricing on the RX 570/580 seems to be creeping back up again? I suspect that the recent price jump on ETH (and other altcoins) is spurring mining demand again - though not to the level of this past spring.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 08:33:25 PM |
|
Due to the demise of NH - will be looking at new NH when they decide to resume business - doubt it that they could come back from the disaster - I have decided to put all mining operations back to LTC, DASH, Monero and ZEC -- and hoard all these coins. By then time Coinbase adds those coins into GDAX trading -- likely we will see all of them passing 1k per coin in valuation.
Litecoin should already be in GDAX - haven't heard of any plans for them to add ZEC DASH or Monero but none of those would shock me.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Oakey22
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 11:31:05 PM |
|
Those Chinese boards look fantastic. I am about to place an order from alibaba for some. What processor is everyone using on the 8+4 GPU motherboard?
My plan is to have 1070ti GPU's on them with the hybrid water cooling from EVGA.
|
|
|
|
|
|