Sixth alt coin thread I forgot to mod last thread.

[VoskCoin]

15,500 a freaking coin!

taking more profit today.

As for nicehash  had to be an inside job.

they use multiple signature addresses.

cashed-out today too -- getting ready for a major dip when futures trading comes online on Sunday night.

inside job.... or.... a disgruntled employee?

You think futures will crash BTC I see people on both sides of the fence? I'm guessing BTC will at least ride up until then // when you say you cashed out what'd you cash out into?

If anyone's interesting
This is a pretty opinionated piece and I could be totally wrong and get set back a lot in my progress with the moves I made. . so naturally I'm hoping they're the right ones xD

https://youtu.be/ZoOrOCaCLs0

What are your rigs pointed to fam? And when you say you're all BtC now, does that just mean your mining Zen and converting to BtC?

Cool vids btw - keep em up ...funky outro music rockin'

thanks man! you saying you like the outro music or don't? xD

zhash suprnova for zen /suprnova for btg and luckpool for some hush, idk if its the best setup but works for me

I just put most of my altcoin stash into BTC in the crazy climb, now I'm going to start accumulating some more alts back up

Hard to say exactly what the best move is but as long as I'm in the game I'll profit some lol

[tpd09]

I hope NH does not recover from this so we can get some nice ROIs this month 

[citronick]

Hey Guys - What pool can you recommend for ONE Avalon 741 - ZPOOL.CA seems to not be very profitable.

Any and all advice is appreciated!

NH would have been great...

My A741 farm is currently mining PPS+ at btc.viabtc.com:3333

Simple setup and dashboard

[philipma1957]

Hey Guys - What pool can you recommend for ONE Avalon 741 - ZPOOL.CA seems to not be very profitable.

Any and all advice is appreciated!

NH would have been great...

My A741 farm is currently mining PPS+ at btc.viabtc.com:3333

Simple setup and dashboard

actually   your current pool is okay for him

just as long as he mines it to say bittrex address.


he will get a 0.001 payout  about once a day.

let it combine to say 0.010  on bittrex then cash it or move it

[citronick]

on some better news...

here my first attempt on getting the Vega64 to work and get pass 2000h/s per GPU.

Using the 1100HBM registry power table hack.
Using the latest AMD Blockchain driver
Around 270watts - Colorful B250 riserless 8 slots, M2-128GB, 8GB DDR4 RAM, Celeron G3930 LGA1151 CPU, WIN10 and 40GB virtual memory.

Still need to get those watts lower - will need to finetune. "Geek Mark" was able to get his 6 x Vega64s at 1050watts

Guide

RX Vega 64 (or flashed 56) Registry Editor, Power Play Table and Devcon Tutorial!
https://www.youtube.com/watch?v=GlLxggLTFYE

I'll be following this closely i need to watch the video and do the powerplay thing , my vegas suck a ton of power

This updated guide by Mark is easier to follow:

https://www.youtube.com/watch?v=me9OxWZ71a0

Will post the rig later - 4 x GPU, I need to unbox 4 more but its too late here and need sleep - continue tommorow

[rs1x]

Hey Guys - What pool can you recommend for ONE Avalon 741 - ZPOOL.CA seems to not be very profitable.

Any and all advice is appreciated!

NH would have been great...

My A741 farm is currently mining PPS+ at btc.viabtc.com:3333

Simple setup and dashboard

actually   your current pool is okay for him

just as long as he mines it to say bittrex address.


he will get a 0.001 payout  about once a day.

let it combine to say 0.010  on bittrex then cash it or move it

Let it run for two days - and I think I was at  .0007 , or whatever is the equivalent of $10 usd. I think NH was paying around $15 a day.

[VyprBTC]

15,500 a freaking coin!

taking more profit today.

As for nicehash  had to be an inside job.

they use multiple signature addresses.

cashed-out today too -- getting ready for a major dip when futures trading comes online on Sunday night.

inside job.... or.... a disgruntled employee?

You think futures will crash BTC I see people on both sides of the fence? I'm guessing BTC will at least ride up until then // when you say you cashed out what'd you cash out into?

If anyone's interesting
This is a pretty opinionated piece and I could be totally wrong and get set back a lot in my progress with the moves I made. . so naturally I'm hoping they're the right ones xD

https://youtu.be/ZoOrOCaCLs0

What are your rigs pointed to fam? And when you say you're all BtC now, does that just mean your mining Zen and converting to BtC?

Cool vids btw - keep em up ...funky outro music rockin'

thanks man! you saying you like the outro music or don't? xD

zhash suprnova for zen /suprnova for btg and luckpool for some hush, idk if its the best setup but works for me

I just put most of my altcoin stash into BTC in the crazy climb, now I'm going to start accumulating some more alts back up

Hard to say exactly what the best move is but as long as I'm in the game I'll profit some lol

No, music is good bro lol

Well it's counter productive to your channel but if you're just wanting solely profit, then I would just invest the rest of your money into bitcoins vs more mining equipment.

We made double in fiat/USD what we invested last year through mining, but if we would have just let our bitcoins sit in the wallet instead of buying the equipment, we would have made 10x fiat. 5 x's more money by just letting the coins we already had sit there, vs buying tons of equipment and even though double our money, made 5'x less money than doing absolutely... nothing.

[Fedrey]

15,500 a freaking coin!

taking more profit today.

As for nicehash  had to be an inside job.

they use multiple signature addresses.

cashed-out today too -- getting ready for a major dip when futures trading comes online on Sunday night.

inside job.... or.... a disgruntled employee?

You think futures will crash BTC I see people on both sides of the fence? I'm guessing BTC will at least ride up until then // when you say you cashed out what'd you cash out into?

If anyone's interesting
This is a pretty opinionated piece and I could be totally wrong and get set back a lot in my progress with the moves I made. . so naturally I'm hoping they're the right ones xD

https://youtu.be/ZoOrOCaCLs0

What are your rigs pointed to fam? And when you say you're all BtC now, does that just mean your mining Zen and converting to BtC?

Cool vids btw - keep em up ...funky outro music rockin'

thanks man! you saying you like the outro music or don't? xD

zhash suprnova for zen /suprnova for btg and luckpool for some hush, idk if its the best setup but works for me

I just put most of my altcoin stash into BTC in the crazy climb, now I'm going to start accumulating some more alts back up

Hard to say exactly what the best move is but as long as I'm in the game I'll profit some lol

No, music is good bro lol

Well it's counter productive to your channel but if you're just wanting solely profit, then I would just invest the rest of your money into bitcoins vs more mining equipment.

We made double in fiat/USD what we invested last year through mining, but if we would have just let our bitcoins sit in the wallet instead of buying the equipment, we would have made 10x fiat. 5 x's more money by just letting the coins we already had sit there, vs buying tons of equipment and even though double our money, made 5'x less money than doing absolutely... nothing.

But if you look at the price of Bitcoin to date, then the Bitcoin mining industry does not seem so expensive. Thus, all the Bitcoin will be stored on your wallet, and therefore you need to pamper yourself with some things.

[VyprBTC]

15,500 a freaking coin!

taking more profit today.

As for nicehash  had to be an inside job.

they use multiple signature addresses.

cashed-out today too -- getting ready for a major dip when futures trading comes online on Sunday night.

inside job.... or.... a disgruntled employee?

You think futures will crash BTC I see people on both sides of the fence? I'm guessing BTC will at least ride up until then // when you say you cashed out what'd you cash out into?

If anyone's interesting
This is a pretty opinionated piece and I could be totally wrong and get set back a lot in my progress with the moves I made. . so naturally I'm hoping they're the right ones xD

https://youtu.be/ZoOrOCaCLs0

What are your rigs pointed to fam? And when you say you're all BtC now, does that just mean your mining Zen and converting to BtC?

Cool vids btw - keep em up ...funky outro music rockin'

thanks man! you saying you like the outro music or don't? xD

zhash suprnova for zen /suprnova for btg and luckpool for some hush, idk if its the best setup but works for me

I just put most of my altcoin stash into BTC in the crazy climb, now I'm going to start accumulating some more alts back up

Hard to say exactly what the best move is but as long as I'm in the game I'll profit some lol

No, music is good bro lol

Well it's counter productive to your channel but if you're just wanting solely profit, then I would just invest the rest of your money into bitcoins vs more mining equipment.

We made double in fiat/USD what we invested last year through mining, but if we would have just let our bitcoins sit in the wallet instead of buying the equipment, we would have made 10x fiat. 5 x's more money by just letting the coins we already had sit there, vs buying tons of equipment and even though double our money, made 5'x less money than doing absolutely... nothing.

But if you look at the price of Bitcoin to date, then the Bitcoin mining industry does not seem so expensive. Thus, all the Bitcoin will be stored on your wallet, and therefore you need to pamper yourself with some things.

The point if the goal is profit, just profit, then my and everyone elses mining earnings were beat by over 500%. We spent close to 200 Bitcoins at the time, which was around 400k, and partners sold out at 800k which on the outside fiat was doubled, but that was only 120 bitcoins (they cashed in @7k) vs the 200 that was invested.

[ATCkit]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC

I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

[Storx]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC



I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

Hey buddy, check your memory, these onda motherboards are very specific on memory requirements.. is your memory 1.35V? When i first got my D1800 BTC board i bought DDR3 memory listed under 1.35 search, but when i double checked the memory itself it had printing of 1.5v listed on the product, so i had to ship it back and order new memory. Also i found that the memory was very tricky on getting the proper angle to get it to fully seat for me. I think the clear bios worked for me because i was trying to boot it on 1.5V memory and it was unhappy with it throwing errors, then when i placed the correct memory in the computer it wouldnt boot tell i cleared the errors from the 1.5v memory.

[Marvell2]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC



I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

Hey buddy, check your memory, these onda motherboards are very specific on memory requirements.. is your memory 1.35V? When i first got my D1800 BTC board i bought DDR3 memory listed under 1.35 search, but when i double checked the memory itself it had printing of 1.5v listed on the product, so i had to ship it back and order new memory. Also i found that the memory was very tricky on getting the proper angle to get it to fully seat for me. I think the clear bios worked for me because i was trying to boot it on 1.5V memory and it was unhappy with it throwing errors, then when i placed the correct memory in the computer it wouldnt boot tell i cleared the errors from the 1.5v memory.

I used those ripjaw ddr 4 rams thos worked for me

[ATCkit]

A big thanks Storx.

I started out with  DDR3L  1600/1333MHz 1.35 volt as that's what Onda states on its website:

http://www.onda.cn/MotherBoard_Specifications.aspx?id=373

I then went to DDR4 SO-DIMM DDR4 2133  1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.

I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V       P (or D) R (or 4) 1710.



Cheers

[ATCkit]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC



I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

Hey buddy, check your memory, these onda motherboards are very specific on memory requirements.. is your memory 1.35V? When i first got my D1800 BTC board i bought DDR3 memory listed under 1.35 search, but when i double checked the memory itself it had printing of 1.5v listed on the product, so i had to ship it back and order new memory. Also i found that the memory was very tricky on getting the proper angle to get it to fully seat for me. I think the clear bios worked for me because i was trying to boot it on 1.5V memory and it was unhappy with it throwing errors, then when i placed the correct memory in the computer it wouldnt boot tell i cleared the errors from the 1.5v memory.

I used those ripjaw ddr 4 rams thos worked for me

Thx Marvel. Gonna try this one: G.SKILL Ripjaws Series 8GB DDR4 2400MHz CL16 1.2V SODIMMs (F4-2400C16S-8GRS). A store nearby has it in stock.
I really find it weird how poorly the RAM fits into the slot.

[Marvell2]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC



I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

Hey buddy, check your memory, these onda motherboards are very specific on memory requirements.. is your memory 1.35V? When i first got my D1800 BTC board i bought DDR3 memory listed under 1.35 search, but when i double checked the memory itself it had printing of 1.5v listed on the product, so i had to ship it back and order new memory. Also i found that the memory was very tricky on getting the proper angle to get it to fully seat for me. I think the clear bios worked for me because i was trying to boot it on 1.5V memory and it was unhappy with it throwing errors, then when i placed the correct memory in the computer it wouldnt boot tell i cleared the errors from the 1.5v memory.

I used those ripjaw ddr 4 rams thos worked for me

Thx Marvel. Gonna try this one: G.SKILL Ripjaws Series 8GB DDR4 2400MHz CL16 1.2V SODIMMs (F4-2400C16S-8GRS). A store nearby has it in stock.
I really find it weird how poorly the RAM fits into the slot.

hope it works for you and yes make sure the ram is properly slotted in ,  Iusually first pull back those clicky tab things then slide it in and make sure it clicks.  I bet the ram was ur issue its common for a cpu fan to spin and no post usually its ram

[vapourminer]

I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

crap.

i never really had problems with risers, but i like the simplicity of these onda boards. very clean setup.

[philipma1957]

Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?

( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)

Do I need to install a VGA driver or something else?

Is there an online manual ?( I couldn't find one of the ONDA website.)

Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo. Ran all over Toronto to replace RAM and CPU. Sill not working.
Here's my set up:

MOBO : see above
PSU: CORSAIR HXi Series HX1200i 1200W 80 PLUS PLATINUM
CPU: Intel Core I3-7100 Kaby Lake Dual-Core Processor Socket LGA 1151, 3.9GHz
RAM: G.SKILL Ripjaws Series 4GB 260-Pin DDR4 SO-DIMM DDR4 2133 (PC4 17000) Laptop Memory Model F4-2133C15S-4GRS
GPU's 1 x EVGA 1060 SC, and 7 x EVGA 1060 SCC



I plugged it in the way Phil mentioned so that i didn't short it. I even tried what worked for Storx ( pushing the CMOS button) when he had trouble getting his D1800 to post.

not sure if this will help.. have the onda B250 D8P ver 1. G4400, 8 gig ddr4 sodimm (g.skill ripjaw ddr4 2400), 128 gig msata. dual psus, mixed amd and nvidia, 6 cards total.

for initail setup: i booted with a single rx460 and got into the bios. in there i set the iGPU (to use the G4400 Pentium) as the primary video to use the hdmi port, then disconnected the 460 video (left the card in though) and rebooted. from there i installed win10. the iGPU came up as "microsoft basic vga" or something to that effect in device manager. then i let it search for drivers and it grabbed the intel driver from ms. from there is was a cakewalk, more or less.

the board does some sort of self discovery mode on initial boot and any boot after a cmos reset. in a bios reset i think it expects a card in the 1st slot (closest to cpu) and doesnt use teh iGPU (if any), its kinda of a weird board until you get it setup, then its fine. its actually rock solid for me. i like it, cards have good spacing and cooling is good with 3 noctua 140s each pushing 133 cfm at them.

EDIT: i have looked for documentation; cant find any

Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.

Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.

So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.

Hey buddy, check your memory, these onda motherboards are very specific on memory requirements.. is your memory 1.35V? When i first got my D1800 BTC board i bought DDR3 memory listed under 1.35 search, but when i double checked the memory itself it had printing of 1.5v listed on the product, so i had to ship it back and order new memory. Also i found that the memory was very tricky on getting the proper angle to get it to fully seat for me. I think the clear bios worked for me because i was trying to boot it on 1.5V memory and it was unhappy with it throwing errors, then when i placed the correct memory in the computer it wouldnt boot tell i cleared the errors from the 1.5v memory.

I used those ripjaw ddr 4 rams thos worked for me

Thx Marvel. Gonna try this one: G.SKILL Ripjaws Series 8GB DDR4 2400MHz CL16 1.2V SODIMMs (F4-2400C16S-8GRS). A store nearby has it in stock.
I really find it weird how poorly the RAM fits into the slot.

well  ddr3 and ddr4 have different  pin setup.

one of them  does not work.

it simply fits wrong.  and if you forced the wrong one you broke the mobo..


https://en.wikipedia.org/wiki/DIMM


from wiki

201 to 300 pins


204-pin SO-DIMM, used for DDR3 SDRAM   >>>>>>>>>>>>>>>  if you hold this against the 260   the slot  does not match




214-pin MicroDIMM, used for DDR2 SDRAM
240-pin DIMM, used for DDR2 SDRAM, DDR3 SDRAM and FB-DIMM DRAM
244-pin MiniDIMM, used for DDR2 SDRAM


260-pin SO-DIMM, used for DDR4 SDRAM >>>>>>>>>>>>>>>>>>  I am not sure which one of these you need  but sounds like you messed up by forcing of of these two sticks in the slot






260-pin SO-DIMM, with different notch position than on DDR4 SO-DIMMs, used for UniDIMMs that can carry either DDR3 or DDR4 SDRAM >>>>  never saw this one adds to confusion



278-pin DIMM, used for HP high density SDRAM.
288-pin DIMM, used for DDR4 SDRAM

[VoskCoin]

A big thanks Storx.

I started out with  DDR3L  1600/1333MHz 1.35 volt as that's what Onda states on its website:

http://www.onda.cn/MotherBoard_Specifications.aspx?id=373

I then went to DDR4 SO-DIMM DDR4 2133  1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.

I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V       P (or D) R (or 4) 1710.



Cheers

I actually had this exact question thought I had the ram I needed but I definitely don’t

@phil what ram are you using for the onda

This is for the board you sent me

Anyone have a link to ram that will definitely work?





What connections needs to be powered and what doesn’t? // all these sata and molex?

[JaredKaragen]

vosk;

check your board, is it s B250D8P 1.0 or 2.0?  (looks like 1.0, so phil will be able to comment a link for the one he uses) these will dictate memory type needed (ddr3 or 4)  I know phil linked the ram he uses somewhere ~20+ pages ago...

all of the molex/sata plugs need to be powered as per another member's reports... for the PCIE slot power draw.

[citronick]

A big thanks Storx.

I started out with  DDR3L  1600/1333MHz 1.35 volt as that's what Onda states on its website:

http://www.onda.cn/MotherBoard_Specifications.aspx?id=373

I then went to DDR4 SO-DIMM DDR4 2133  1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.

I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V       P (or D) R (or 4) 1710.



Cheers

I actually had this exact question thought I had the ram I needed but I definitely don’t

@phil what ram are you using for the onda

This is for the board you sent me

Anyone have a link to ram that will definitely work?

...

What connections needs to be powered and what doesn’t? // all these sata and molex?

I standardized on this based from seller recommendation - over a dozen of the D1800 with this DDR3 4gb standard notebook RAM installed with smOS USB3 stick - already in production - no issues.

https://www.aliexpress.com/item/Brand-ADATA-RAM-DDR3-8GB-1600MHz-Ram-Memory-204-Pin-SO-DIMM-1333-Compatible-For-Lenovo/32302931186.html?spm=a2g0s.9042311.0.0.5ephHI