funminer
|
|
December 07, 2017, 10:41:40 PM |
|
How you write the password commands? for me d=64 work my line looks like this: a=x11 d=64 p=3.5 w=827 n=d326
and don´t forget, the diff must be power of 2
Thanks mate, works now so simple!! I was using , instead of space. Feel properly stupid now. No problem it´s not stupid the , you use on a lot of other pools, but prohash is in a lot of config things special, look only the way they use for the ALGO, think it´s the only pool that use the password commands to define the ALGO all other pools use the Stratum.
|
|
|
|
Knightslugger
Newbie
Offline
Activity: 19
Merit: 0
|
|
December 07, 2017, 10:51:26 PM |
|
I still can't find a stable freq/voltage and not get HW errors all the time. I just checked my miners this evening and one of them was on for 2 hours and had THOUSANDS of HW's. voltage 13 freq 512 global.
|
|
|
|
JACKSEG
Newbie
Offline
Activity: 63
Merit: 0
|
|
December 07, 2017, 10:52:36 PM |
|
I use Prohash, ZPool, GranatGas, coinmine, Miningpoolhub and antpool. and for the poolswitching using Awesome Miner with profitswitch. but Prohash must be switch manual, not working with the profitswitch in Awesomeminer i use prohash mostly only when i want to get paid in other Coins then DASH or BTC, the payout are not so good in the last weeks
Hi, I use Awesome Miner with profitswitch. But I don't understand how to enter the parameters for the password since there are no password fields in autoprofit. The only solutiion is enter the parameters for the password since there are no password fields in autoprofit. The only solution I see, is create pools and not use autoprofit.
|
|
|
|
funminer
|
|
December 07, 2017, 11:16:25 PM |
|
I use Prohash, ZPool, GranatGas, coinmine, Miningpoolhub and antpool. and for the poolswitching using Awesome Miner with profitswitch. but Prohash must be switch manual, not working with the profitswitch in Awesomeminer i use prohash mostly only when i want to get paid in other Coins then DASH or BTC, the payout are not so good in the last weeks
Hi, I use Awesome Miner with profitswitch. But I don't understand how to enter the parameters for the password since there are no password fields in autoprofit. The only solutiion is enter the parameters for the password since there are no password fields in autoprofit. The only solution I see, is create pools and not use autoprofit. Create the pools and add them to the miner, when profitswitching is Active the programm use all pool in the miner list for switching. The problem with Prohashing is, that Awesomeminer detect the ALGO over the stratum Address and make the API calls to get the Actual paying and this is not working correct, but sometimes Awesomeminer switch to prohashing, too. The Dev from Awesomeminer wrote that for the difference how Prohashing work he will not support it. Think with using of MiningPoolHub, Zpool, GranatGas, Antpool and Coinmine you get a good Profit, better then only mine DASH.
|
|
|
|
may142012
Member
Offline
Activity: 301
Merit: 10
|
|
December 07, 2017, 11:36:39 PM |
|
Is Blissz still supporting his FW? If not just tell me so i can revert back to Bitmain's FW.
|
|
|
|
blissz (OP)
|
|
December 08, 2017, 12:12:37 AM |
|
Is Blissz still supporting his FW? If not just tell me so i can revert back to Bitmain's FW.
Don't worry much to come mate. currently testing the fix for some pools
|
|
|
|
dlezama
Member
Offline
Activity: 140
Merit: 17
|
|
December 08, 2017, 12:16:58 AM |
|
How you write the password commands? for me d=64 work my line looks like this: a=x11 d=64 p=3.5 w=827 n=d326
and don´t forget, the diff must be power of 2
You pay $3.5 per kWh I read their help and I think it's supposed to be expressed in $ per kWh. However I tried p=0.12 and the electricity cost in their statistics is crap...
|
|
|
|
blissz (OP)
|
|
December 08, 2017, 12:27:00 AM |
|
I will release an intermediate version that increases pool stability. Will test the night at prohashing. Hopefully can release tommorow
|
|
|
|
stangerm2
Newbie
Offline
Activity: 26
Merit: 0
|
|
December 08, 2017, 01:03:11 AM |
|
blissz y u turn away linux firmware dev's, why...
|
|
|
|
hta
Jr. Member
Offline
Activity: 261
Merit: 6
A happy family is but an earlier heaven!
|
|
December 08, 2017, 02:24:06 AM |
|
With a dev fee of 1.5% over the lifetime of D3, I am very unhappy, you can download this old FW (which is more stable than Bitmain's November FW), I run with Frequency 400 at 820w. FW of Blissz cost 780w. If you set up the fan at 40-50% will not be noisy. I do not want to use FM Blissz anymore, high fees follow D3 throughout life. Linkd download FW is rated stable Bitman in September, low power consumption, less error xxxxx. http://www.mediafire.com/file/1q646ohg38xmhv0/Antminer-D3-201709131713-0M.tar.gzup, for those who care,
|
LEARN FROM YESTERDAY, LIVE FOR TODAY, HOPE FOR TOMORROW. THE IMPORTANT IS NOT TO STOP QUESTIONING (ALBERT EINSTEIN)
|
|
|
|
markoive
Newbie
Offline
Activity: 31
Merit: 0
|
|
December 08, 2017, 05:46:18 AM |
|
Did you buy some kind of electrical adapter to plug it in? I'll try to connect 2 Noctua NF-F12 PWM to D3 but they don't starting. I did change Fan Mode to Auto Default and plug it in and nothing... Anybody has connected some silent fans? Thanks for answer Just cut the two lines and it will fit , that's how i did it.
|
|
|
|
caymanguy
Member
Offline
Activity: 112
Merit: 10
|
|
December 08, 2017, 06:22:50 AM |
|
4$ a day what a business this device will die soon
|
|
|
|
funminer
|
|
December 08, 2017, 07:09:21 AM |
|
How you write the password commands? for me d=64 work my line looks like this: a=x11 d=64 p=3.5 w=827 n=d326
and don´t forget, the diff must be power of 2
You pay $3.5 per kWh I read their help and I think it's supposed to be expressed in $ per kWh. However I tried p=0.12 and the electricity cost in their statistics is crap... No, they have not fix the Power calculation in the pool, so you must multiply with 10-20 i use 12, it´s buggy
|
|
|
|
may142012
Member
Offline
Activity: 301
Merit: 10
|
|
December 08, 2017, 07:50:37 AM |
|
4$ a day what a business this device will die soon
What should i do with two of my failures?
|
|
|
|
blissz (OP)
|
|
December 08, 2017, 10:44:53 AM |
|
While testing the next version I am currently compiling a L3 version for the guys accidentally flashed the d3 firmware on the l3 and bricked their l3. I changed something that will cause a forced PIC update on the l3 board. Unfortunately I can't test it for you guys, but hopefully it will bring those l3's alive again.
|
|
|
|
miningag
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 08, 2017, 10:52:50 AM |
|
i have also pool switching and pool problems 2 devices and on one it says pool alive (and mining on this pool) and the second device said dead... also on startup it mostly select pool 2.... and it stys on this pool and dont try to switch back to pool0 or 1(in stats it shows its alive!) yesterday i had no active pool and a chain errors too look attachment in this picture it shows first 2 pools are alive and the 3th is death (but the other device was working on it!) and i have seen there was no pool active (first 2 where aive!) and not mining and it shows the chain errors after few minutes.... https://imgur.com/cXTFQfRboth devices are from nov bathc but they look different (housing is bigger from the secound one who makes the most troubles) also one problem is sometimes i have neyrly 0 hw error and after restart (same ssettings nothing changed only restart..) i got tonns of hw errors... has anyone the same problem?
|
|
|
|
blissz (OP)
|
|
December 08, 2017, 10:54:39 AM |
|
i have also pool switching and pool problems ..
has anyone the same problem?
It's a known issue that is caused if the first pool you're using is not that stable, but I am currently testing the fix for this. Will be up in a few hours
|
|
|
|
miningag
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 08, 2017, 11:02:28 AM |
|
i have also pool switching and pool problems ..
has anyone the same problem?
It's a known issue that is caused if the first pool you're using is not that stable, but I am currently testing the fix for this. Will be up in a few hours on every restart i thinking of you hahahaha thanks blissz for your work and support!
|
|
|
|
blissz (OP)
|
|
December 08, 2017, 11:12:31 AM |
|
While testing the next version I am currently compiling a L3 version for the guys accidentally flashed the d3 firmware on the l3 and bricked their l3. I changed something that will cause a forced PIC update on the l3 board. Unfortunately I can't test it for you guys, but hopefully it will bring those l3's alive again.
edit: there you go, I hope this helps some of you that bricked their L3's https://bitcointalk.org/index.php?topic=2383200.msg25967013#msg25967013
|
|
|
|
|