Antminer D3 Blissz firmware (10/12 v1.12 update)

[BDM]

Hi what does this kernel log mean with the Headers are not corret?? Where are the lost asics onboard one and two? Does anybady know?

Dec  9 13:50:21 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO1 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Dec  9 13:50:21 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO1 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: tty_init chainid = 1
Dec  9 13:50:21 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO2 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Dec  9 13:50:21 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO2 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: tty_init chainid = 2
Dec  9 13:50:21 (none) local0.err cgminer[375]: create rx read thread for /dev/ttyO4 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec  9 13:50:21 (none) local0.err cgminer[375]: create tx read thread for /dev/ttyO4 ok
Dec  9 13:50:21 (none) local0.notice cgminer[375]: open device over
Dec  9 13:50:21 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec  9 13:50:21 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Dec  9 13:50:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 54 ASICs
Dec  9 13:50:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Dec  9 13:50:22 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec  9 13:50:24 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec  9 13:50:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xf0, Header2 = 0x00 rp = 541
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf0, Header1 = 0x00, Header2 = 0x00 rp = 542
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x18 rp = 543
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x18, Header2 = 0xcd rp = 544
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x18, Header1 = 0xcd, Header2 = 0x00 rp = 545
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xcd, Header1 = 0x00, Header2 = 0x1e rp = 546
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x1e, Header2 = 0x76 rp = 547
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x1e, Header1 = 0x76, Header2 = 0x57 rp = 548
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x76, Header1 = 0x57, Header2 = 0x00 rp = 549
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x57, Header1 = 0x00, Header2 = 0xeb rp = 550
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xeb, Header2 = 0x00 rp = 551
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xeb, Header1 = 0x00, Header2 = 0xec rp = 552
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xec, Header2 = 0xac rp = 553
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xec, Header1 = 0xac, Header2 = 0x18 rp = 554
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xac, Header1 = 0x18, Header2 = 0x57 rp = 555
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x18, Header1 = 0x57, Header2 = 0x00 rp = 556
Dec  9 13:50:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:24 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec  9 13:50:24 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xe0 rp = 487
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xe0, Header2 = 0x00 rp = 488
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0xe0, Header1 = 0x00, Header2 = 0x00 rp = 489
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 490
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 491
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 492
Dec  9 13:50:24 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 487
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 488
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 489
Dec  9 13:50:24 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 490
Dec  9 13:50:25 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 54 ASICs
Dec  9 13:50:25 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x57, Header1 = 0xff, Header2 = 0xaa rp = 557
Dec  9 13:50:25 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xff, Header1 = 0xaa, Header2 = 0x55 rp = 558
Dec  9 13:50:25 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Dec  9 13:50:25 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec  9 13:50:25 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec  9 13:50:26 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec  9 13:50:26 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xf0, Header2 = 0x00 rp = 1099
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf0, Header1 = 0x00, Header2 = 0x1d rp = 1100
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x1d, Header2 = 0x08 rp = 1101
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x1d, Header1 = 0x08, Header2 = 0x00 rp = 1102
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x08, Header1 = 0x00, Header2 = 0x00 rp = 1103
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x9e rp = 1104
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x9e, Header2 = 0x6b rp = 1105
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x9e, Header1 = 0x6b, Header2 = 0x00 rp = 1106
Dec  9 13:50:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:27 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec  9 13:50:27 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xe0 rp = 979
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xe0, Header2 = 0x00 rp = 980
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0xe0, Header1 = 0x00, Header2 = 0x00 rp = 981
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 982
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 983
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 984
Dec  9 13:50:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 977
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 978
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 979
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 980
Dec  9 13:50:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 54 ASICs
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x6b, Header1 = 0x00, Header2 = 0xf9 rp = 1107
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xf9, Header2 = 0x9e rp = 1108
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf9, Header1 = 0x9e, Header2 = 0x8c rp = 1109
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x9e, Header1 = 0x8c, Header2 = 0x98 rp = 1110
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x8c, Header1 = 0x98, Header2 = 0xaa rp = 1111
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x98, Header1 = 0xaa, Header2 = 0xf8 rp = 1112
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xaa, Header1 = 0xf8, Header2 = 0xaa rp = 1113
Dec  9 13:50:27 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf8, Header1 = 0xaa, Header2 = 0x55 rp = 1114
Dec  9 13:50:28 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Dec  9 13:50:28 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec  9 13:50:28 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec  9 13:50:29 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec  9 13:50:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xf0, Header2 = 0x00 rp = 1655
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf0, Header1 = 0x00, Header2 = 0x00 rp = 1656
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x18 rp = 1657
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x18, Header2 = 0x5d rp = 1658
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x18, Header1 = 0x5d, Header2 = 0x00 rp = 1659
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x5d, Header1 = 0x00, Header2 = 0x9e rp = 1660
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x9e, Header2 = 0xf6 rp = 1661
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x9e, Header1 = 0xf6, Header2 = 0x9c rp = 1662
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xf6, Header1 = 0x9c, Header2 = 0xfe rp = 1663
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x9c, Header1 = 0xfe, Header2 = 0x9e rp = 1664
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xfe, Header1 = 0x9e, Header2 = 0xac rp = 1665
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x9e, Header1 = 0xac, Header2 = 0x98 rp = 1666
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xac, Header1 = 0x98, Header2 = 0xd5 rp = 1667
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x98, Header1 = 0xd5, Header2 = 0x00 rp = 1668
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xd5, Header1 = 0x00, Header2 = 0x08 rp = 1669
Dec  9 13:50:29 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x08, Header2 = 0xd4 rp = 1670
Dec  9 13:50:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec  9 13:50:29 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec  9 13:50:30 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xe0 rp = 1471
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xe0, Header2 = 0x00 rp = 1472
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0xe0, Header1 = 0x00, Header2 = 0x00 rp = 1473
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1474
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1475
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1476
Dec  9 13:50:30 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1467
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1468
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1469
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1470
Dec  9 13:50:30 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 54 ASICs
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0x08, Header1 = 0xd4, Header2 = 0xd5 rp = 1671
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xd4, Header1 = 0xd5, Header2 = 0xff rp = 1672
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xd5, Header1 = 0xff, Header2 = 0xaa rp = 1673
Dec  9 13:50:30 (none) local0.err cgminer[375]: get_asic_response: 2 Headers are not corret! Header0 = 0xff, Header1 = 0xaa, Header2 = 0x55 rp = 1674
Dec  9 13:50:30 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Dec  9 13:50:30 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec  9 13:50:30 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec  9 13:50:30 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec  9 13:50:30 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Dec  9 13:50:31 (none) local0.notice cgminer[375]: every_chain_get_PIC16F1704_freq_new
Dec  9 13:50:32 (none) local0.notice cgminer[375]: set_frequency: frequency = 494
Dec  9 13:50:32 (none) local0.notice cgminer[375]: set_frequency: frequency = 494
Dec  9 13:50:32 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Dec  9 13:50:32 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Dec  9 13:50:32 (none) local0.notice cgminer[375]: software_set_address: chain 0 has 54 ASIC, and addrInterval is 1
Dec  9 13:50:32 (none) local0.notice cgminer[375]: Now Set

• Chain Address

Dec  9 13:50:33 (none) local0.notice cgminer[375]: software_set_address: chain 1 has 54 ASIC, and addrInterval is 1
Dec  9 13:50:33 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Dec  9 13:50:34 (none) local0.notice cgminer[375]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Dec  9 13:50:34 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec  9 13:50:35 (none) local0.notice cgminer[375]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Dec  9 13:50:35 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Dec  9 13:50:35 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec  9 13:50:36 (none) local0.warn cgminer[375]: set_temperature_offset_value
Dec  9 13:50:36 (none) local0.notice cgminer[375]: set_temperature_offset_value: Chain0 Sensor0 temp offset : -3,
Dec  9 13:50:37 (none) local0.notice cgminer[375]: set_temperature_offset_value: Chain1 Sensor0 temp offset : -3,
Dec  9 13:50:37 (none) local0.notice cgminer[375]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -3,
Dec  9 13:50:37 (none) local0.notice cgminer[375]: frequency = '537'
Dec  9 13:50:37 (none) local0.notice cgminer[375]: dev.timeout = 562356 us
Dec  9 13:50:37 (none) local0.notice cgminer[375]: open_core
Dec  9 13:50:40 (none) local0.err cgminer[375]: low hashrate detection trigger: 15994.200000 Gh/s
Dec  9 13:50:40 (none) local0.notice cgminer[375]: set voltage = 1381.503211  real:125 mv
Dec  9 13:50:41 (none) local0.notice cgminer[375]: set_PIC16F1704_voltage_new ok, voltage = 0x73
Dec  9 13:50:41 (none) local0.notice cgminer[375]: set_PIC16F1704_voltage_new ok, voltage = 0x73
Dec  9 13:50:42 (none) local0.notice cgminer[375]: set_PIC16F1704_voltage_new ok, voltage = 0x7d
Dec  9 13:50:42 (none) local0.err cgminer[375]: cgminer time error total_secs = 1512827442.321036 last_total_secs = 1.000000
Dec  9 13:50:42 (none) local0.err cgminer[375]: WTF No pool 3 found!
Dec  9 13:50:42 (none) local0.err cgminer[375]: WTF No pool 3 found!
Dec  9 13:50:43 (none) local0.err cgminer[375]: D1 0: work 7f not find error
Dec  9 13:50:43 (none) local0.err cgminer[375]: D1 0: work 7f not find error
Dec  9 13:50:43 (none) local0.err cgminer[375]: D1 0: work 7f not find error

[blissz]

I don't know, but it is related with missing / undetected ASIC's. I also found out that there are certain frequency holes where the ASIC's are not happy at all.

i.e. at frequency 381Mhz I have lot's of problems, but at 400 Mhz it's fine again. The autotune algorithm that I work on, will cope with that as well.

[stugots2]

I posted a thread about this but got no answer so ill ask it here.

What does a TON of HW errors and VERY high DiffA do to profits because thats whats happening to mine now.

[ethron]

Autotune would be very nice!!!

I've much problems to setup the boards. If i fix one board near 0 HW, than the next board will setup, the same board produces much HW errors. 

[ruptan]

I'll be running about 15 D3s on this firmware in the next couple of days, thanks!

Why you guys bought so many of D3s? You know its not that much profitable any more? Bitmain tricked us and bombarded us with these equipment that is not making much now a days. Stop buying Bitmain D3s guys.

[jackfirth]

Hi,

Do you have support for awesome miner software?

I use this to profit switch between pools. but it cant seem to apply my Group of pools to the miner?

Jack

[jackfirth]

Hi,

Do you have support for awesome miner software?

I use this to profit switch between pools. but it cant seem to apply my Group of pools to the miner?

Jack

I have just realized you do, but it wont let me prioritise a specific pool, the priority button doesnt do anything? im stuck on my default pool

[ruptan]

Seems like Bitmain has a backdoor to their machine. Anyone sure about The Antbleed Backdoor?

http://www.antbleed.com/

[jackfirth]

Also any plans to do the same on the L3+ ??

loving the software just need to improve awesome miner a little further. lost some functionality

[deezhere]

Seems like Bitmain has a backdoor to their machine. Anyone sure about The Antbleed Backdoor?

http://www.antbleed.com/

Interesting. Seems like an easy fix.

[Top0tun]

Seems like Bitmain has a backdoor to their machine. Anyone sure about The Antbleed Backdoor?

http://www.antbleed.com/

It was disabled in later versions.

[heythorp]

Blissz,

Class move fixing the bricked L3. I saw you stated it was your software that did it so you felt it was your duty to fix it. To be honest tit truely wasnt your fault. This should show Anyone who has a problem with the dev fee, he is an honest person.


On a sepperate note.

I just got back a board from Bitmain warranty(california) seems to be working fine. The  process took about 2 business weeks. Not great but the communication was great with Bitmain and their ticket process is pretty good.


Also this firmware has allowed me to run both machines at a combined 1550 watts. And it could be better, but some boards require more volts than others.

[Gritch]

Tell them you aren’t scamming us Blissz. Say it ain’t so.

Most of you know better, but let's try to be helpful
Look at the kernel log / connect whattomine / look at your mining stats and you will all see how it works:

every two hours it will mine exactly 1 minute and 50 seconds on one of the dev pools I hardcoded. This goes automatically / independent of the pools you have configured yourself. After that it will mine 2 hours on your pools again etc....

If you do see a reduced hashrate on your pool I think this might help some of you:

• you're on an older firmware  which had a bug where it could not switch back to the main pool if it was down and it could hang for two hours in the dev pool.
• you only have one pool configured. If your main pool dies it will jump to the next alive pool (which is then the devfee pool)
• your main pool is not stable so it switches to the backup pool sometimes (which will cause that the hashrate is divided over two pools)
• you mine on a pool that scams you
• you have so many hardware errors / xxxx that kills your hashrate. (and have auto reboot disabled)
• you have an unstable internet connection: this will cause that you get the work packages late and you get a lot more then normal discarded shares, because they couldn't be delivered to the pool in time
• Same as the previous point, but then a bad connection on the pool operator side.
• For some other reason your d3 just doesn't like my firmware -> just flash back to stock ( I can't think of anything else then the above, but I am just a human...)

Ok so where to start: the kernel log will be really helpful if you experience problems. Furthermore you can run a ping on the pool for a few hours to see if you get lost packages. If you're still in doubt: just post your problem here (describe it good and post your kernel log) so myself or a fellow forum member can help you out.

edit: added the last line, which is a possibility of course :')

Thanks for the thorough explanation. Great job on the firmware buddy. I appreciate the work you have done to improve our space heaters’ efficiency.

For skeptics, how is dev fee calculated :

Duration dev pool : 110 secondes every two hours(see attachments) is 1320 secondes per day.

If you subtract this result by the number of minutes per day, and that you calculate  1.5% of this value you will find:1276

If we compare to the 1320 second we are close to 1.50 is exactly 1.565% !

Good job Blissz !! keep on going

https://www.dropbox.com/s/t72arjz0tufi8qj/4.jpg?dl=0

https://www.dropbox.com/s/5dlfpydqy28l6lr/3.png?dl=0

https://www.dropbox.com/s/48shixyyxhwjzvb/2.jpg?dl=0

https://www.dropbox.com/s/8ox5g3yap57nfhf/1.png?dl=0

[david916]

Blissz, Class move fixing the bricked L3. I saw you stated it was your software that did it so you felt it was your duty to fix it. To be honest tit truely wasnt your fault. This should show Anyone who has a problem with the dev fee, he is an honest person.

Who has a problem with the dev fee?  I haven't heard anyone complaint that it isn't fair, especially since it was set at a very reasonable 1.5%.  What is irritating is that there are more posts about people posting than posts about the actual fee.  Stop kicking a dead horse.  The fee is 1.5%.  Don't like it?  Don't use the software.  Don't like people posting about it?  Pull up your big kid pants and ignore them like everyone else.  Yes, I see the irony in this - but it's to nudge everyone to move on.

[Triangulum]

Hi Blissz,

I think there is a bug in your latest firmware 08/12 v1.11. On the Miner Status page, the chains are numbered 2, 3, 4, but on the Miner Advanced Configuration page, they are numbered 1, 2, 3. Any changes made to chain 2 on the Miner Configuration page will be applied to chain 3 on the Miner Status page, and any changes to chain 3 will be applied to chain 3 and 4. Changes to chain 1 on the Miner Configuration page doesn't seem to affect anything.

As an experiment, I set the global frequency at 450M, chain 1 at 444M, chain 2 at 438M and chain 3 at 425M. Below is an excerpt from kernel log:

Jan  1 00:35:47 (none) local0.notice cgminer[12817]: set_frequency: frequency = 444
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: set_frequency: frequency = 438
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: set_frequency: frequency = 425
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: set_frequency: frequency = 425
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: software_set_address: chain 0 has 0 ASIC, and addrInterval is 1
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Jan  1 00:35:47 (none) local0.notice cgminer[12817]: Now Set [1] Chain Address
Jan  1 00:35:48 (none) local0.notice cgminer[12817]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Jan  1 00:35:48 (none) local0.notice cgminer[12817]: Now Set [2] Chain Address
Jan  1 00:35:48 (none) local0.notice cgminer[12817]: software_set_address: chain 3 has 60 ASIC, and addrInterval is 1
Jan  1 00:35:48 (none) local0.notice cgminer[12817]: Now Set [3] Chain Address

On the Miner Status page, it shows that the frequency of chain 2, 3, and 4 are 438M, 425M, and 425M respectively.

check the connections on the hashboard. mine had 1,2, and 4. bitmain connected hashboard 3 wrong, into port 4. maybe port 1 is empty?

You're right. I just checked the hashboard connections of the 4 D3 that I have. One of them have hashboards connected to port 0,1,2 and the other 3 have hashboards connected to port 1,2,3. Thanks for pointing that out to me.

[samshanna]

Guys.  I'm setup with zpool with 6 D3's.   Running around 17/GH each.   What diff should i be running?   Im showing roughly 20/GH total on Zpools dashboard.  I'm totally lost.  Thanks for the help.   

[bcn2048]

hi, Blissz, I'm going to flash your firmware over my D3 to try to improve its working.

I have 19,3 GHs model and first thing was to lower the frequency.  I set it to 506 Mhz where I get average 18200 GHs, the power consumption is around 1130W. I find those settings are the sweetspot regarding HW errors.

HW errors appears mostly in the second hashboard, arround 200 a day, also third hashboard is around 4 Celsius degrees hotter than first and second - can these be fixed with changing voltage  ?

I  heard from some folks, that undervolting the graphical cards for mining could harm them in longterm (if this is true at all) - do you think it is the same with asics ?  I'm mainly conserned about loosing warranty - can Bitmain obtain any info from my D3 if there are any custom firmwares (antbleed is probably history now) ?

thanks in advance for answers,

best regards to you and to the rest of community

[Renanxx1]

Someone can help I flashed the last version of blizz firmware but the tempetures was to high.
Now I returned to the stock firmware and the tempetures keep high and with some errors.

[funminer]

Hi,

Do you have support for awesome miner software?

I use this to profit switch between pools. but it cant seem to apply my Group of pools to the miner?

Jack

I have just realized you do, but it wont let me prioritise a specific pool, the priority button doesnt do anything? im stuck on my default pool

It´s true, have just updated to the last Version and have the same Error.
But you can change the Priority, but is more complicated.
Click The right spot on Prioritize- there you see Define Priority and Quota
When you then double click on the number in the priority field you can change the number, but you must alltime change minimum 2 pools, that at the end only 1 Pool have prio 0.

[funminer]

Someone can help I flashed the last version of blizz firmware but the tempetures was to high.
Now I returned to the stock firmware and the tempetures keep high and with some errors.

What was your Voltage and frequncy settings.
What temp you have in the room, where are the Miner and what is for you high temp