[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[Jsorrentino]

firefox


bottom of pic

[1715272074]

1715272074

[1715272074]

1715272074

[1715272074]

1715272074

[1715272074]

1715272074

[1715272074]

1715272074

[Nexworks]

I'm wondering, if Bminer sol/s is showing net (dev-fee deducted) rate or not?

Looks like pool side is around 10% lower than actually sol/s rate showed by bminer...

Cheers,
Andy

It actually shows all sols computed by the bminer. Note that the number remains the same even the devfee is turned off (which does not submit devfee shares but it disables *quite a few* optimizations).

Did you turn off devfee? You might want to try it again with devfee turned on. Thanks.

Im curious what these optimizations do?

[SPEC1AL1ST]

Hello!
Thanks for miner
1) You can add GPU temps on miner window?
2) You can add colors to miner window for best reading?
3) Please fix empty graphics on page https://c2n.me/3QZUO75

Just wondering which browser are you using?

Tried on firefox and chrome

Im curious what these optimizations do?

Interesting too

[Welsh_Surfer]

Hi all.. Sorry if these are stupid questions, I'm new to all this.

What sort of temperature is safe for GPU to be running at?

Will this work with an Nvidia GeForce GTX 970M on a laptop?

[mejutty]

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

[SPEC1AL1ST]

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

Show your .bat

[mejutty]

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

Show your .bat

bminer -api 127.0.0.1:1880 -uri stratum://address.name2:x@us.miningspeed.com:3072

that is it

on all 3 pc's two work one doesn't. 

[sogakira]

Support for Suprnova ?

[cryptoyes]

Hello!
Thanks for miner
1) You can add GPU temps on miner window?
2) You can add colors to miner window for best reading?
3) Please fix empty graphics on page https://c2n.me/3QZUO75

+1 for temps, fan speed, power usage (in Watts, not %) reported in output. Sol/W would also be nice.

@realbminer, could you please add a command-line option for each? An option would be better than enabling by default because polling the driver for temperature and fan speed can slow down the mining, at least under Linux (e.g. when TDP is lowered and the GPU is at 100% utilization). I have that issue on many of my 1070s when running "nvidia-smi stats -c 1 -d gpuUtil" takes ages. I'm not sure if reading the temp and fan speed via CUDA calls is any better.

Support for Suprnova ?

+1 ... even though I hate suprnova for the ridiculous payment fees and lies (claims the fee is the network's, but it's 10x higher than what the network charges for ZEN, similar story for ZCL and ZEC).

[SPEC1AL1ST]

Support for Suprnova ?

Yes im mine on suprnova

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

Show your .bat

bminer -api 127.0.0.1:1880 -uri stratum://address.name2:x@us.miningspeed.com:3072

that is it

on all 3 pc's two work one doesn't.  

Try that:

Code:

@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1bFZqnd9xrV7aUheYSTM4D6xmzXQebM39Z

SET USERNAME=%ADDRESS%.GPU

SET POOL=eu1-zcash.flypool.org:3333

SET SCHEME=stratum

START "Bminer: Flypool ZEC" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880 -no-timestamps

Change your ADDRESS

[CarlOrff]

Support for Suprnova ?

Yes, no problem.

[realbminer]

firefox


bottom of pic

Tested on the latest version of Firefox (57.0.4) and Chrome (60.0.3112.113). Both worked for me.

You might need to wait for a few minutes to see the graphs as they are updated every minute.

[realbminer]

Hello!
Thanks for miner
1) You can add GPU temps on miner window?
2) You can add colors to miner window for best reading?
3) Please fix empty graphics on page https://c2n.me/3QZUO75

+1 for temps, fan speed, power usage (in Watts, not %) reported in output. Sol/W would also be nice.

@realbminer, could you please add a command-line option for each? An option would be better than enabling by default because polling the driver for temperature and fan speed can slow down the mining, at least under Linux (e.g. when TDP is lowered and the GPU is at 100% utilization). I have that issue on many of my 1070s when running "nvidia-smi stats -c 1 -d gpuUtil" takes ages. I'm not sure if reading the temp and fan speed via CUDA calls is any better.

Support for Suprnova ?

+1 ... even though I hate suprnova for the ridiculous payment fees and lies (claims the fee is the network's, but it's 10x higher than what the network charges for ZEN, similar story for ZCL and ZEC).

The UI actually have all the information. Is it sufficient?

Suprnova is supported out-of-the-box. See https://www.bminer.me/examples/#mining-bitcoin-gold-btg-on-suprnova for an example.

[securitizones]

Can you please get this working for nicehash. 

[realbminer]

The miner doesn't work on Ubuntu 14 (Ethos)

./bminer: relocation error: ./bminer: symbol _ZTTNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

What to do?

Can you please try the following?

sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install libstdc++6

[mejutty]

Support for Suprnova ?

Yes im mine on suprnova

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

Show your .bat

bminer -api 127.0.0.1:1880 -uri stratum://address.name2:x@us.miningspeed.com:3072

that is it

on all 3 pc's two work one doesn't.  

Try that:

Code:

@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1bFZqnd9xrV7aUheYSTM4D6xmzXQebM39Z

SET USERNAME=%ADDRESS%.GPU

SET POOL=eu1-zcash.flypool.org:3333

SET SCHEME=stratum

START "Bminer: Flypool ZEC" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880 -no-timestamps

Change your ADDRESS

Same result exits after about a 2 second pause but no output at all.

[realbminer]

I have 3 pc's and 1 will not run bminer it just sits there for about 3 seconds shows now output on screen then just exits.  Anything I can do to see why it's just not starting or even throwing an error??  It just the other 2 equihash miners just fine.

Can you please show the screenshots or logs? Thanks.

[Rexheyi]

Someone creates a .Bat with these parameters.

STRATUM:   stratum+tcp://btg.suprnova.cc
PORT:   8816
Username: master0.slave0
Password:   masterslave00

[realbminer]

Tried it.  Working well on single coins (Zclassic currently).  Only seeing a 1% gain over the DSTM Zec miner, but 1% is still good.

However, I can't seem to point it at an algo-switching pool.  I'm still pretty new, so many I'm missing something.  Keep getting an end of file error.

Also, anyone know how to get this into AwesomeMiner so it will auto-restart if it dies?  I haven't been successful yet.

Which algo-switching pool are you using?

By default the miner will restart itself in case of failures.

[shalex]

The miner doesn't work on Ubuntu 14 (Ethos)

./bminer: relocation error: ./bminer: symbol _ZTTNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

What to do?

Can you please try the following?

sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install libstdc++6

sudo add-apt-repository ppa:ubuntu-toolchain-r/test

Done

sudo apt-get update

Done

sudo apt-get install libstdc++6

Already the newest version installed

The same error...