Prima Primat
Member
Offline
Activity: 117
Merit: 10
|
|
February 09, 2014, 07:22:14 AM |
|
If you're getting high rejects, just set a fixed server that works well for you. I use US East and I'm at 99.4% accepted atm.
|
|
|
|
Damnsammit
|
|
February 09, 2014, 07:24:00 AM |
|
If you're getting high rejects, just set a fixed server that works well for you. I use US East and I'm at 99.4% accepted atm.
Whoa, whoa, whoa.... what the fuck do you think you are doing? This involves people to actually think for themselves and try and adjust their settings to the best solutions. Clearly that is not a strength of the average middlecoin user...
|
|
|
|
ckoeber
Member
Offline
Activity: 182
Merit: 10
|
|
February 09, 2014, 07:41:34 AM |
|
This thread is getting better and better every day.
I would bet money this is the best thread on bitcointalk ...
|
|
|
|
Damnsammit
|
|
February 09, 2014, 07:47:51 AM |
|
This thread is getting better and better every day.
I would bet money this is the best thread on bitcointalk ...
Yeah it's one of my favorites for sure! Oh well, I'm done trying to educate people on how mining works. Now I just prefer to ridicule them on their idiocies.
|
|
|
|
hardergamer
|
|
February 09, 2014, 08:03:42 AM |
|
If you're getting high rejects, just set a fixed server that works well for you. I use US East and I'm at 99.4% accepted atm.
Whoa, whoa, whoa.... what the fuck do you think you are doing? This involves people to actually think for themselves and try and adjust their settings to the best solutions. Clearly that is not a strength of the average middlecoin user... It is very funny hearing the average user crying on here, and not even trying to difrent sever..
|
|
|
|
forcefedvr6
Member
Offline
Activity: 101
Merit: 10
|
|
February 09, 2014, 08:11:05 AM |
|
Fuck CGWatcher.
...Do you have a better solution for that stubborn card that decides to get SICK or DEAD randomly?... Developing a stable config file will solve that type of problem.
|
|
|
|
Damnsammit
|
|
February 09, 2014, 08:23:11 AM |
|
Fuck CGWatcher.
...Do you have a better solution for that stubborn card that decides to get SICK or DEAD randomly?... Developing a stable config file will solve that type of problem. Ummmm, yeah that's all fine and good... but what is your solution for this scenario? 5850 works at 350kh/s for about 12-24 hours and then randomly goes SICK immediatley losing 350kh/s on your hashrate... You can "stabilize" it by reducing the intensity to 14 and getting 270kh/s for 24hrs with no problems or you can use CGWatcher to restart the miner and get the GPU running at 350kh/s again within a minute. Sorry but I would rather do the latter and "stabilize" at 80kh/s more. Not a good explanation. Sorry, bud, but you are another person who is "fuck this" or "fuck that" without actually offering a valid explanation. Miners are fucking stupid and this thread is proof.
|
|
|
|
platinum4
|
|
February 09, 2014, 08:28:15 AM |
|
Large unexchange -> balance dump!
|
|
|
|
testthewhiterabbit
Newbie
Offline
Activity: 54
Merit: 0
|
|
February 09, 2014, 08:56:49 AM |
|
A few days ago, someone posted a website where historical data on BTC/Mh could be obtained. Can anybody remember the site, had a look back but can't seem to find it?
|
|
|
|
testthewhiterabbit
Newbie
Offline
Activity: 54
Merit: 0
|
|
February 09, 2014, 09:14:59 AM |
|
A few days ago, someone posted a website where historical data on BTC/Mh could be obtained. Can anybody remember the site, had a look back but can't seem to find it?
No need, found it! This is what I was after: http://middlecoin.info/
|
|
|
|
Eastwind
|
|
February 09, 2014, 09:39:24 AM |
|
So I tried middlecoin for 18 hours with 6.3Mh/s and got a pay out of .075... I take it this is higher than normal??
It is, if you only mine for 18 hours and there are some unexchanged coins. I have 4.8Mh/s, mined for many days, today's payout is 0.062.
|
|
|
|
dadach
|
|
February 09, 2014, 09:50:53 AM |
|
wafflepool and middlecoin are on par in the last 24hr...
|
To DA Moon!!! donations accepted >.< 38nvHaNqF5nv4ifhUyq9CChnBmRs2DSv4r
|
|
|
conderus
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 09, 2014, 10:07:02 AM Last edit: February 09, 2014, 10:23:10 AM by conderus |
|
Hello. I have got two issues that I can not solve. First is that there is no my reports on middlecoin,my username is 1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU so when I place link bellow there is “NoSuchKey” error. http://www.middlecoin.com/reports/1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU.htmlThe second problem is that,I monitor my stats from link bellow. http://stratehm.net/#address=1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU,isGlobalStatsCollapsed=false,isDisplaySummary=true,isDisplayBTC=true,isDisplayPower=trueI run my miner yesterday on BAMT after one day brake (before this brake my miner work also one day),end now on local Munin Stats I have got 307 accepted shares and 19 rejected,but on this site startem.net there is only 32 accepted shares and one rejected,why is there such big difference? Sorry for my English.Best Regards. EDIT: Maybe these shares stats from stratehm.net are from only last hour,not total since run miner as on BAMT stats?But I can not confirm this anywhere.
|
|
|
|
forcefedvr6
Member
Offline
Activity: 101
Merit: 10
|
|
February 09, 2014, 10:17:58 AM |
|
Fuck CGWatcher.
...Do you have a better solution for that stubborn card that decides to get SICK or DEAD randomly?... Developing a stable config file will solve that type of problem. Ummmm, yeah that's all fine and good... but what is your solution for this scenario? 5850 works at 350kh/s for about 12-24 hours and then randomly goes SICK immediatley losing 350kh/s on your hashrate... You can "stabilize" it by reducing the intensity to 14 and getting 270kh/s for 24hrs with no problems or you can use CGWatcher to restart the miner and get the GPU running at 350kh/s again within a minute. Sorry but I would rather do the latter and "stabilize" at 80kh/s more. Not a good explanation. Sorry, bud, but you are another person who is "fuck this" or "fuck that" without actually offering a valid explanation. Miners are fucking stupid and this thread is proof. Well now we are just thread-jacking and getting way off-topic, but that guys post is validation enough as why not to run CGWatcher. CGWatcher is a piece of shit. I'm no Einstein, but I'm not fucking stupid either. I agree that cutting the balls off by selecting a lower intensity is fucking stupid. It's also fucking stupid to wring the shit out of your cards until they end up "sick" and "dead", and to rely on a re-start to straighten everything out until it happens again. Throwing shares away to re-boot because I overheated my cards or constantly running at a sub-par speed are not my ideas of a stable and optimized system. All but one of my single-core 7950s are set to I-19 and average ~630 kh/s each, and throttle back and forth between ~620 and ~640. I have one set to I-18 so I can periodically use my monitor while mining without locking up the rig. That one throttles between ~600 and 620 Khs. Temps almost never go above 74 degrees and fan speeds almost never go above 3400 rpm on any of my cards. Most of the time they run lower in terms of temp and fan speed. I could squeeze a liiiiittle more hash out of them if I wanted periodic lock-ups, but what's the point since I stopped having sick/dead cards (your temps are too high, you are killing your fans/cards) or hard locks (indicates gpu engine and/or mem clocks and/or T.C. settings are too high), once I tuned my config. Why do I need CGWatcher again? Why do I need a program that would consistently NOT work properly and consistently NOT activate CGMiner if I decided to reboot or the power went out? A simple BIOS setting and a cgminer batch file in the start-up menu addresses those conditions. And forget about setting CGWatcher up for quota work across multiple pools, those settings were good for what, one go-around, iirc. It didn't take me too long to figure out that CGWatcher was basically an all-around pain-in-the-ass, barely-serviceable band-aid for a poorly tuned config file. CGMiner gives you all of the tools that you need to maximize your hash rate as well as to avoid sick/dead cards/hard locks at the same time. It took me a little longer to figure out which version of CGMiner has a dead-balls accurate quota function, but yeah, it does that too.
|
|
|
|
Qxw
|
|
February 09, 2014, 10:28:01 AM |
|
Hello.
I have got two issues that I can not solve.
First is that there is no my reports on middlecoin,my username is 1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU so when I place link bellow there is “NoSuchKey” error.
It is there in "all users" data. http://www.middlecoin.com/allusers.html(it do not show " /reports/youraddress.html before first payment) 1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU 0.4474 0.0186 0.00136263 0.00677698
|
BTC, BCH, BTG, UTC
|
|
|
Pfool
|
|
February 09, 2014, 10:31:35 AM |
|
Hello. I have got two issues that I can not solve. First is that there is no my reports on middlecoin,my username is 1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU so when I place link bellow there is “NoSuchKey” error. http://www.middlecoin.com/reports/1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU.htmlThe second problem is that,I monitor my stats from link bellow. http://stratehm.net/#address=1MwE4zQh64mw751Y9crP3Z9QdZM6rL2jU,isGlobalStatsCollapsed=false,isDisplaySummary=true,isDisplayBTC=true,isDisplayPower=trueI run my miner yesterday on BAMT after one day brake (before this brake my miner work also one day),end now on local Munin Stats I have got 307 accepted shares and 19 rejected,but on this site startem.net there is only 32 accepted shares and one rejected,why is there such big difference? Sorry for my English.Best Regards. EDIT: Maybe these shares stats from stratehm.net are from only last hour,not total since run miner as on BAMT stats?But I can not confirm this anywhere. You are right...it is the shares number for the last hour...
|
Thanx BTC: 19wv8FQKv3NkwTdzBCQn1AGsb9ghqBPWXi
|
|
|
|
conderus
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 09, 2014, 11:00:45 AM |
|
(it do not show " /reports/youraddress.html before first payment)
I though about this also but I was not sure,Thank’s a lot people now all is clear,there should be a little FAQ update for people like I,then will be less stupid questions (I am extremely beginner in mining - six days ago I did not know what is bitcoin).Best Regards
|
|
|
|
csf3lih
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 09, 2014, 11:04:18 AM |
|
Immature=0 odd
|
|
|
|
rallasnackbar
|
|
February 09, 2014, 11:21:46 AM |
|
Switched to Clevermining, been on it for 12 hours and the totals are right in line with this estimate. After days of sub 0.01 on Middlecoin, this is such a relief. I don't mind growing pains but the lack of communication/reassurance from h20 is a bit much. I don't doubt he works hard on it, but a bit more communication would do wonders to keeping your workers happy. Jumping ship until I see MC back to being stable. The constant up/downs, rejects, bugged stats... just can't do it anymore!
Word!! Hes last reply was the 19th of January Last communication was yesterday. Check twitter link http://www.middlecoin.com/I got twitter blocked, that shit is garbage. Besides i think the majority of hes miners come from bitcointalk.
|
|
|
|
|