[ANN][SRC] Securecoin | A Fast and Secure Version of Bitcoin | 2013

[gigawatt]

Well, I hacked together a working Block Crawler if anybody is interested.  It's hosted on a low end VPS, so PLEASE DO NOT BOT IT.
This is just a test run, so don't expect amazing things.


http://src.servebeer.com/


Donations are appreciated though.

malicious url blocked in avast, i guess it was used for other things at one point

It's a dynamic DNS service (no-ip), so that's probably why.

If you want direct, use http://192.241.177.5/

does the same thing

Well, it's hosted at DigitalOcean and it's just a slightly-modified version of Block Crawler, so I can't imagine why it's angry.  Did Avast block the entire DigitalOcean IP range?

[idev]

[gigawatt]

--snip--

Where's that scan from?  I'd be curious about the "info" section on Dr. Web.

VirusTotal says it's clean when you use the direct IP, but it doesn't like the *.servebeer.com domain because it's dynamic DNS.

Edit: Looks like I'm right.

Edit2: Found your scanner URL.  Same detection based on No-IP domain:
http://www.urlvoid.com/scan/notreallyarealsiteipromise.servebeer.com/

[gigawatt]

I think I might be done with an actual block explorer if anybody's interested.  Still trying to work out a few kinks, but it seems okay so far.

I've basically taken Abe and butchered it.  I still need to integrate the Securecoin hashing algorithm, but it seems to work well enough by ignoring any "invalid" hashes (because Abe is using sha256 instead of what Securecoin uses).

If it goes well, I'll upload the SQLite database tonight.

[jdebunt]

good job gigawatt

[soulmann]

Something wrong with http://src.coinmine.pl. Time Since Last Block   46 minutes 45 seconds

[Eli0t]

Something wrong with http://src.coinmine.pl. Time Since Last Block   46 minutes 45 seconds

yes i think the stats are stuck, the block confirms havnt changed

EDIT looks like its fixed

[gigawatt]

Does anybody happen to have the "round logo" version of the SecureCoin logo?  Looking for something around the size of 100px by 100px.

edit: disregard that, I'm an idiot.

[mige]

in the last couple of hours i can't mine on two machines.  Cant log on server stratum+tcp://src.coinmine.pl:6020.
on other machines work fine.

http://www.dodaj.rs/f/28/EL/30SgNqO5/src-error.jpg

[baloo_kiev]

Try http://78.27.191.182:28372/ - my p2pool node, 1% fee, 4 days of uptime now.

Also, if any of p2pool node hosters here are interested, I can post my networks.py so we can turn our separate nodes into true p2pool.

[xTachibana]

is there a formula to see how many blocks you can find a day? im using a 3570k, a duo core e5800 and a 2 core (4 thread) i7 laptop

[Tommo_Aus]

I've setup many pools before but I can't get my SRC pool working, I'm using mmcfe with stratum. Stratum connects to the wallet and detects new blocks, the CPU miners connect to stratum and also detect new blocks but I haven't found one share with over 3000 kh/s pointed at my stratum.

I've tried setting POOL_TARGET (base difficulty) to 1 instead of 16 in my stratum config but I haven't seen any changes, am I missing something?

EDIT - ok from all the reading I've been doing it looks like a customised stratum is needed, what sort of changes need to be made? Is the custom stratum available for others to run a pool?

[baloo_kiev]

is there a formula to see how many blocks you can find a day? im using a 3570k, a duo core e5800 and a 2 core (4 thread) i7 laptop

Generally it's

Blocks/day = Hashrate * 60 * 60 * 24 / (difficulty * 2^24) ~= 0.00515 * Hashrate / difficulty

[feeleep]

in the last couple of hours i can't mine on two machines.  Cant log on server stratum+tcp://src.coinmine.pl:6020.
on other machines work fine.

I was doing server maintenance yesterday and added second server. This should improve performance a lot.

feeleep

[Tommo_Aus]

Hi feeleep,

Would you be able to take a look at my post a couple of posts up?

Cheers

[A L I E N]

Try http://78.27.191.182:28372/ - my p2pool node, 1% fee, 4 days of uptime now.

Also, if any of p2pool node hosters here are interested, I can post my networks.py so we can turn our separate nodes into true p2pool.

This would probably be a good idea for network integrity.  Thanks for your contributions as usual.

[A L I E N]

I think I might be done with an actual block explorer if anybody's interested.  Still trying to work out a few kinks, but it seems okay so far.

I've basically taken Abe and butchered it.  I still need to integrate the Securecoin hashing algorithm, but it seems to work well enough by ignoring any "invalid" hashes (because Abe is using sha256 instead of what Securecoin uses).

If it goes well, I'll upload the SQLite database tonight.

Thanks for your work on the block explorer.

[feeleep]

I've setup many pools before but I can't get my SRC pool working, I'm using mmcfe with stratum. Stratum connects to the wallet and detects new blocks, the CPU miners connect to stratum and also detect new blocks but I haven't found one share with over 3000 kh/s pointed at my stratum.

I've tried setting POOL_TARGET (base difficulty) to 1 instead of 16 in my stratum config but I haven't seen any changes, am I missing something?

EDIT - ok from all the reading I've been doing it looks like a customised stratum is needed, what sort of changes need to be made? Is the custom stratum available for others to run a pool?

Hi - you probably setting up to high difficulty - try to set it up to 0.1 for example

[Tommo_Aus]

Aah I see, from the comment in the config I thought 1 was the lowest possible. I'm trying with 0.01 now and I'm seeing some shares, however each shares rejected with the reason "Share is above target". Does this mean I need to change the difficulty in mmcfe?

EDIT - is it something to do with the quark hashing algorithm?

[ahmed_bodi]

I've setup many pools before but I can't get my SRC pool working, I'm using mmcfe with stratum. Stratum connects to the wallet and detects new blocks, the CPU miners connect to stratum and also detect new blocks but I haven't found one share with over 3000 kh/s pointed at my stratum.

I've tried setting POOL_TARGET (base difficulty) to 1 instead of 16 in my stratum config but I haven't seen any changes, am I missing something?

EDIT - ok from all the reading I've been doing it looks like a customised stratum is needed, what sort of changes need to be made? Is the custom stratum available for others to run a pool?

Hi - you probably setting up to high difficulty - try to set it up to 0.1 for example

incorrect, visit my github name is ahmed_bodi, both me and erundook are using my customized version of pushpool. All it basically is, is tenebrix pushpool with the scrypt modules replaces wfor quark one's and appropriate hash values changed