Bitweasil
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2014, 08:41:10 PM |
|
IS it true these can only be setup on a 192.168.1.0/24 subnet which is non configurable? Will it not pick up DHCP off a different type of subnet such as 10.0.1.0/24?
It has no built in DHCP client, so, no, it won't "pick up DHCP." They are static IPs only. Set a static IP on your desktop/laptop to configure them if you have to. Though the default setting being a common router IP is a bit silly IMO.
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2014, 11:19:52 PM |
|
I have tried to trouble shoot for days but I can't seem to get to my cubes settings page.
Here is a shot of the router settings:
Here is a picture of the usual error I see when I try to connect:
Here is a picture of a screen I sometimes come across but nothing else loads:
The status light clicks on and stays solid red The SB Pwr and Pwr lights are lit and solid green The Ethernet lights are solid orange and flickering green.
I'm using a Lepa N500 5ooW power supply.
I'm pretty sure I'm just missing something small but I'm pretty new to this so if you know what I did wrong and can explain like I'm 5 it would be appreciated.
Have you solved this yet? If not, I'm assuming it has to do with your number of users allowed. I had to change my number of users to incorporate the .254 IP address. Hope that helps...
|
|
|
|
graphicsdump
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 04:50:27 AM |
|
i ran that but it gave an error
File "c:\Python26\lib\site-packages\py2exe\boot_common.py", line 92, in <module> ImportError: No module named linecache ImportError: No module named zipextimporter ImportError: No module named argparse
There's more text in there but I think you get the idea...am I supposed to have a bunch of other stuff installed and running?
i'm not so clued up on python, sorry. you can run the stratum proxy with the following command line "mining_proxy" it defaults to slush's pool so you only "NEED" the port settings for other pools. You can also add the -q switch, reduces the amount of crud it prints to the screen and the -rt switch, allows the difficulty to vary according to the power of your cube. Have you got the Python runtime installed? I downloaded and installed Python 3.3, tried running the stratum proxy, same errors...uninstalled 3.3, downloaded and installed 2.7, same errors. You wrote "you can run the stratum proxy with the following command line"....what command line?
|
|
|
|
graphicsdump
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 07:02:01 AM |
|
Hi guys, still having trouble here. I re-looked at the instructions on Slush's pool: Installing the proxy is pretty trivial:
Download official Windows binaries (EXE) or source package for Linux. Run downloaded file. Console window will appear and proxy automatically connects to the pool. No command-line parameters required. Now just change the URL in your miners from http://api.bitcoin.cz/ to http://localhost:8332/. Miners connect to the proxy using the old protocol, but the proxy talks to the pool by the new one! "Now just change the URL in your miners from http://api.bitcoin.cz/ to http://localhost:8332/."Any idea what this means and where I enter this data? I'm completely lost.
|
|
|
|
Apteryx
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 08:20:52 AM |
|
your path\mining_proxy.exe -q -rt
That will, by default connect to slush's pool. The -q switch reduces (not stops) the amount of crud sent to the monitor and the -rt switch allows for variable difficulty which reduces the network traffic and the load on the server.
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 04:08:19 PM |
|
I'm hoping someone here can help me with my four cubes. I have had nothing but problems since I got them. They are running in a data center with the proxy pointed to Ghash. Two of the four cubes are running on a AX1200i because anymore than that the PSU shuts off-these will stay running One is running on a CX750M, this one will stop running and require a hard reset once every 12 hours. One is running on a EVGA 750B, this one didn't last longer than 3 hours last night. I have tried pretty much everything I can think of: -Rearranging the cards inside the Cube; -There is no damage and the cards have no X's -They were working from the seller perfectly, but once shipped to me they start to cut out; -Heatsinks have been tightened, and the cards have been placed in the slots; -Tried the capacitor trick; -Tried new fuses. If anyone has some insight it would be greatly appreciated, and possible tips. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks!
|
|
|
|
Bitweasil
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 06:37:21 PM |
|
You have two cubes on the AX1200i that remain running perfectly, correct?
Swap the other two cubes with the ones on the AZ1200i. If the ones on the 1200W PSU stay happy, it's PSU issues. If not, it's cube issues.
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 07:17:53 PM |
|
You have two cubes on the AX1200i that remain running perfectly, correct?
Swap the other two cubes with the ones on the AZ1200i. If the ones on the 1200W PSU stay happy, it's PSU issues. If not, it's cube issues.
Alright, I will do that next trip to the DC. What kind of issues could the cube be having? I'm getting no X's when running only O's. Thanks!!
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 09:12:14 PM |
|
I'm hoping someone here can help me with my four cubes. I have had nothing but problems since I got them. They are running in a data center with the proxy pointed to Ghash. Two of the four cubes are running on a AX1200i because anymore than that the PSU shuts off-these will stay running One is running on a CX750M, this one will stop running and require a hard reset once every 12 hours. One is running on a EVGA 750B, this one didn't last longer than 3 hours last night. I have tried pretty much everything I can think of: -Rearranging the cards inside the Cube; -There is no damage and the cards have no X's -They were working from the seller perfectly, but once shipped to me they start to cut out; -Heatsinks have been tightened, and the cards have been placed in the slots; -Tried the capacitor trick; -Tried new fuses. If anyone has some insight it would be greatly appreciated, and possible tips. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks! What do you mean by cutout? They hard power off, they aren't accessible via network, they are accessible but stop mining?
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 09:28:40 PM |
|
I'm hoping someone here can help me with my four cubes. I have had nothing but problems since I got them. They are running in a data center with the proxy pointed to Ghash. Two of the four cubes are running on a AX1200i because anymore than that the PSU shuts off-these will stay running One is running on a CX750M, this one will stop running and require a hard reset once every 12 hours. One is running on a EVGA 750B, this one didn't last longer than 3 hours last night. I have tried pretty much everything I can think of: -Rearranging the cards inside the Cube; -There is no damage and the cards have no X's -They were working from the seller perfectly, but once shipped to me they start to cut out; -Heatsinks have been tightened, and the cards have been placed in the slots; -Tried the capacitor trick; -Tried new fuses. If anyone has some insight it would be greatly appreciated, and possible tips. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks! What do you mean by cutout? They hard power off, they aren't accessible via network, they are accessible but stop mining? If three are connected to the 1200, the PSU Shuts off completely. The two CUBES on a separate PSU become inaccessible via network, stop mining, no status light, and only the top green light is on.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2014, 09:35:47 PM |
|
If three are connected to the 1200, the PSU Shuts off completely.
The two CUBES on a separate PSU become inaccessible via network, stop mining, no status light, and only the top green light is on.
Cubes are quite unique in their loading profile on startup. There is no low power mode, it just goes BOOM full load, causing a spike. The larger PSUs have technology to not turn on when there's a spike as that typically means a short. The only solution is to run only 2. Probably similar with the two on the other cube, its just too much spike load.
|
|
|
|
uberdag
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 61
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 04:58:04 AM |
|
Oks i am not a complete idiot when it come to ubuntu but close...got like 2 litecoin and 1 hex miner running all on xubuntu
I cant seem to get the proxy to start working...
i get the following msg
phillip@minerhex:~/slush0-stratum-mining-proxy-80f4462$ ./mining_proxy.py -o mint.bitminter.com -sp 3333 -gp 8332 Traceback (most recent call last): File "./mining_proxy.py", line 51, in <module> from stratum import settings ImportError: No module named stratum
I got it up and running on my gaming labtop so cube is running
thanks for any help
|
|
|
|
stex2009
Legendary
Offline
Activity: 1134
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 07:58:14 AM |
|
I got this cube from a member here on the forums. For him the cube ran perfectly. For me, the cube says 'DEAD' (in red color) on the bfgminer window after a few hour run. Then, I restart the cube and restart bfgminer, it all works perfectly for the next 3-6 hours, and then repeats 'DEAD'. Any suggestions?
|
|
|
|
dlowings
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 04:38:38 PM |
|
I want to put my two cubes in my basement that has a temp of 48 to 58... would that cause any thermal damage if the cubes shut down and went through a rapid cool down... Just playing the what ifs so I'm making good decisions and not putting my toys in a dangerous situation ..
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 06:30:42 PM |
|
I want to put my two cubes in my basement that has a temp of 48 to 58... would that cause any thermal damage if the cubes shut down and went through a rapid cool down... Just playing the what ifs so I'm making good decisions and not putting my toys in a dangerous situation ..
If they were ever powered down (or even the case wasn't warm enough), condensation would form on the inside. When you next powered up, everything would short. Avoid it, or put them in a cardboard box so they can keep themselves (and the air around them!!!) toasty.
|
|
|
|
lin0sspice
Legendary
Offline
Activity: 1190
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 10:08:36 PM |
|
I have 5 cube cant get full 30 GH/s only 50 % of efficiency ~ 15-19GH ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) 4 on 2 Coolmax ZU-1000B _ 1000W 1 on Thermaltake 750W Please help.... They were fine since i have only 2 Cube on 1 Coolmax 1000 and 1 on thermaltake. Just got 2 more and then Hashrate drop since yesterday ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
◆ Website ◆ Whitepaper ◆ Discord | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | ◆ Latest News ◆ Twitter ◆ Telegram |
[/tab
|
|
|
Apteryx
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 10:28:53 PM |
|
My immediate take on this is it's a power problem but not necessarily the power supplies. Are the PSU's all plugged into the same circuit (they may be on different plugs which are on the same wiring circuit). Thats a lot of amps to drag off one circuit especially if you are 110 volts (rule of thumb is, if you double the voltage you halve the amperage needed to do the same amount of work)
|
|
|
|
lin0sspice
Legendary
Offline
Activity: 1190
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2014, 10:52:08 PM |
|
My immediate take on this is it's a power problem but not necessarily the power supplies. Are the PSU's all plugged into the same circuit (they may be on different plugs which are on the same wiring circuit). Thats a lot of amps to drag off one circuit especially if you are 110 volts (rule of thumb is, if you double the voltage you halve the amperage needed to do the same amount of work)
Yes yes, 4 PSu is plug in the same outlet . ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) any suggest to fix it ?
|
|
|
|
◆ Website ◆ Whitepaper ◆ Discord | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | ◆ Latest News ◆ Twitter ◆ Telegram |
[/tab
|
|
|
lithod02
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 116
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2014, 03:02:45 AM |
|
is there a guide anywhere on how to setup bfgminer on win32 as proxy for the cube? Slushs proxy doesnt like switching pools
|
|
|
|
IamCANADIAN013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2014, 07:36:26 AM Last edit: February 07, 2014, 08:58:19 AM by IamCANADIAN013 |
|
I am so confused here. I picked up one of these cubes. I have plugged it onto my cable modem/router. At least I assume it's also a router as it has wireless capabilities and has 4 Ethernet ports. My computer is plugged into port 1 and I plugged the cube into port 4. I navigate to http://192.168.1.200:8000/ and can access the cube, so I'm assuming I'm right up to this point? I've downloaded mining_proxy, and I've tried to modify it with no success I'm also totally lost now and getting frustrated. I'd just like to set it up to work on bitminter. I've been wading through all the comments and I just get more and more confused. Any help is greatly appreciated. *EDIT* I'm just looking at the instructions that came with my modem, under advanced gateway settings it says http://192.168.0. I'm assuming I need to change the subnet, even though I can access the cube? Whenever I do try to change any cube options, I get: The parameters are updated or the system is simply restarted! Whenever I try to change my modem settings my internet goes out. *edit* (sorry for all the edits, just trying to give the most info I can) I'm reading my modem through firefox through 192.168.1.x. I'm assuming the subnet is now correct?
|
|
|
|
|