[ANN][EAC] EarthCoin *SEEKING NEW EXCHANGES - HUGE VOLUMES BEING MISSED!

[mrchisholm]

from 12th 10pm and 24hrs forward i got 33.6k, well in line with projections. did u talk with Mike even about it to see if something is not working as it should? Can only say that it works fine here.

If you look in the dashboard under Finder, you see how many blocks your workers found and how many coins got generated. Then look under transactions and check the total you ever made in that pool. Mine is about 40% off. I am not just talking 1 or 2 days but the whole period mined in that pool.

ok i generated 665 000 coins, and got credited 538 666 coins. seeing as the pool life time percentage of found blocks is 120% of expected i divide 665 000 by 1.2 and i get 554 000 coins so it seems pretty close to what i should be getting. Perhaps i would be luckier with finding blocks on my own then in the pool but i would need a couple of days / weeks to find out but so far i have gotten what i should expect to get. unless im totally mistaken on the math 

[avw1982]

Found 0 blocks in the pool and got 22k EAC 

[CoinGirl]

Earthcoin now have their own floor in Bitscraper.
See it here: http://www.bitscraper.pw/p/blog-page.html

Congratulation 

yeah, on the 13th floor. That's a sign 

LoL... Dont be superstitious   

[SteveoMB]

Why is solomining not working wit cgminer 3.7.2?

cgminer.exe -o http://127.0.0.1:15678 -u USER -p PW --scrypt

--intensity 11 --worksize 256 -g 2 --thread-concurrency 11328 --auto-fan

--auto-gpu

[bumblebee33]

Why is solomining not working wit cgminer 3.7.2?

cgminer.exe -o http://127.0.0.1:15678 -u USER -p PW --scrypt

--intensity 11 --worksize 256 -g 2 --thread-concurrency 11328 --auto-fan

--auto-gpu

Have you added and adjusted earthcoin.conf to AppData Roaming Earthcoin folder?

You can also try http://localhost:15678 or 192.168.1.x:15678.

earthcoin.conf

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=pass
rpcport=15678
rpcallowip=192.168.1.*
rpcconnect=192.168.1.*
addnode=77.244.7.167
addnode=188.194.13.44
addnode=75.70.192.211
addnode=135.0.165.152
addnode=188.194.13.44
addnode=24.151.4.241

Did you leave your earthcoin wallet open and fully synched?

[minerman1234]

Why is solomining not working wit cgminer 3.7.2?

cgminer.exe -o http://127.0.0.1:15678 -u USER -p PW --scrypt

--intensity 11 --worksize 256 -g 2 --thread-concurrency 11328 --auto-fan

--auto-gpu

Have you added and adjusted earthcoin.conf to AppData Roaming Earthcoin folder?

You can also try http://localhost:15678 or 192.168.1.x:15678.

earthcoin.conf

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=pass
rpcport=15678
rpcallowip=192.168.1.*
rpcconnect=192.168.1.*
addnode=77.244.7.167
addnode=188.194.13.44
addnode=75.70.192.211
addnode=135.0.165.152
addnode=188.194.13.44
addnode=24.151.4.241

You beat me to it, but why so many nodes?  The Earthcoin main page only specifies two nodes:

addnode=64.31.34.145
addnode=198.96.90.41

**Edit:  Ignore me, I somehow missed the list that clearly says "Use the following nodes".  Silly me.

[bumblebee33]

That's what is written on page 1 of the Earthcoin thread under solo mining...
But it will also synch without any nodes added. Just like you don't need the .conf file for the earthcoin wallet. I guess though a few added nodes more won't do any harm...

How to Start
Using the following nodes to join the network:

addnode=75.70.192.211
addnode=135.0.165.152
addnode=77.244.7.167
addnode=188.194.13.44
addnode=24.151.4.241

Sample .conf File: earthcoin.conf
listen=1
daemon=1
server=1
rpcuser=**Yourusername**
rpcpassword=**Yourpassword**
rpcport=15678
rpcconnect=127.0.0.1
addnode=77.244.7.167
addnode=188.194.13.44

By the way I also tried the .bat file with and without --expiry 2  --scan-time 2   --queue 0. But I am not sure I saw an improvement with the added commands. How about you? Are you using just the regular commands?

[SteveoMB]

Why is solomining not working wit cgminer 3.7.2?

cgminer.exe -o http://127.0.0.1:15678 -u USER -p PW --scrypt

--intensity 11 --worksize 256 -g 2 --thread-concurrency 11328 --auto-fan

--auto-gpu

Have you added and adjusted earthcoin.conf to AppData Roaming Earthcoin folder?

You can also try http://localhost:15678 or 192.168.1.x:15678.

earthcoin.conf

listen=1
daemon=1
server=1
rpcuser=user
rpcpassword=pass
rpcport=15678
rpcallowip=192.168.1.*
rpcconnect=192.168.1.*
addnode=77.244.7.167
addnode=188.194.13.44
addnode=75.70.192.211
addnode=135.0.165.152
addnode=188.194.13.44
addnode=24.151.4.241

Did you leave your earthcoin wallet open and fully synched?

thanks for all answeres!

It says "Pool 0 slow/down or URL or credentials invalid!

the .conf was ok from the beginning and also the wallet full synced, but I dont get it to mine solo... poolerino works fine. o0

[bumblebee33]

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

[SteveoMB]

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

[bumblebee33]

Is the earthcoin.conf in the right place? Windows key + R --> type: %appdata% --> earthcoin --> earthcoin.conf

I once misspelled earthcoin.conf (earthcoin.config).

There is somewhere a mistake you are overlooking, probably a spelling mistake.

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

[SteveoMB]

Is the earthcoin.conf in the right place? Windows key + R --> type: %appdata% --> earthcoin --> earthcoin.conf

I once misspelled earthcoin.conf (earthcoin.config).

There is somewhere a mistake you are overlooking, probably a spelling mistake.

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

C:\Users\Name\AppData\Roaming\EarthCoin and earthcoin.conf

[bumblebee33]

Be sure to have

daemon=1
listen=1

in your earthcoin.conf

[bumblebee33]

Is the earthcoin.conf in the right place? Windows key + R --> type: %appdata% --> earthcoin --> earthcoin.conf

I once misspelled earthcoin.conf (earthcoin.config).

There is somewhere a mistake you are overlooking, probably a spelling mistake.

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

C:\Users\Name\AppData\Roaming\EarthCoin and earthcoin.conf

Yes, that is the right place. I remember I also had trouble getting solo mining to work when I started.

[SteveoMB]

Be sure to have

daemon=1
listen=1

in your earthcoin.conf

listen=1
daemon=1
server=1
rpcuser=name
rpcpassword=pass
rpcport=15678
rpcallowip=192.168.1.55  (tried that also with .*)
rpcconnect=192.168.1.55 (tried that also with .*)
addnode=77.244.7.167
addnode=188.194.13.44
addnode=75.70.192.211
addnode=135.0.165.152
addnode=188.194.13.44
addnode=24.151.4.241

[minerman1234]

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

Did you set your Earthcoin wallet to run with the -server command?  Do the following:

• Navigate to your Earthcoin Wallet folder
• Create a shortcut of the Earthcoin .exe
• Move the shortcut to your desktop
• Right click the shortcut, click on "Properties"
• Under the "Target" field, at the very end add a space and type -server
• Click OK, restart your wallet, and you should be good to go once it's done syncing.

Let me know if that works.

[bumblebee33]

did you use localhost:15678?

be sure to change username.1 to just username

[SteveoMB]

example of mine:

cgminer.exe --scrypt -o localhost:15678 -u user -p password -I 13 --thread-concurrency 8192 --gpu-fan 30-85 --gpu-engine 1125 --gpu-memclock 1500 --no-submit-stale

Maybe a mistake with your earthcoin.conf?
Check     rpcallowip=192.168.1.*
             rpcconnect=192.168.1.*

Adjust these IP ranges to your router IP.

Maybe a mistake with your username/password you defined in earthcoin.conf.

Also, if the wallet (server) is on the same computer as the miner, use localhost:15678 - if it's on a different computer, use local IP of wallet computer on your mining computer.
e.g. http://192.168.1.126:15678

I tried your .bat, checked pass and pw and checked router-ip, my ip trough dhcp... everything fits. this is strange!

Did you set your Earthcoin wallet to run with the -server command?  Do the following:

• Navigate to your Earthcoin Wallet folder
• Create a shortcut of the Earthcoin .exe
• Move the shortcut to your desktop
• Right click the shortcut, click on "Properties"
• Under the "Target" field, at the very end add a space and type -server
• Click OK, restart your wallet, and you should be good to go once it's done syncing.

Let me know if that works.

IT'S WORKING.
Nice dude! Thank you!

[bumblebee33]

Great that you got it working. I am not sure I used the server command. I used it with other currencies solo mining, but not sure with earthcoin.
What hashrate do you have?

[SteveoMB]

Great that you got it working. I am not sure I used the server command. I used it with other currencies solo mining, but not sure with earthcoin.
What hashrate do you have?

I use it parallel while working so it is kind of a nice lottery. Diff of eac is quite low so let's see if it works.
My hashrate is at 320 kh/s with my 7870. Not much but there is a chance to find a block...