T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[gerask0]

Hey guys

i need your advice

I just found this miner and trying mine LUX @ BSOD pool

it show me 4000 kh/s for single 1070 gigabyte card (clock +100 Result 2025 MHz)

rig of 3 cards return 11.8 MH/s total

is this too low or normal?

try cryptodredge, it shows 6,5mh on 1080 and 9 on ti

[1714172031]

1714172031

[jaryfaaad]

What are the kinds of GTX you use and how good are they?

[Rican]

just went from 0.5.1 to 0.5.7 and for some odd reason it fails to start due to failover pool on the bat file.  Something about -o (--url) not being accepted, but it works just fine on version 0.5.1. Is there a new command for it to be able to read the failover pool? 0.5.7 works fine with single pool bat file though

[Bender957]

try cryptodredge, it shows 6,5mh on 1080 and 9 on ti

WoW! Thanks! This miner is real beast!

[stevascha]

any benchmark x16r algorithm?

[tbearhere]

@trexminer  Please make builds for SM 5.0 cards. thx 

[uzgidebas]

Windows version is working amazing just like linux version. Stable and without any problem for me. Good job

[Rican]

what's the bat file setup for failover pool? It's different than 0.5.1

[ruplikminer]

can t-rex be used to mine RENESIS SOLO? and not in a pool?

[HaloGenius]

Updated HiveOS custom miner package to v0.5.7

But @trexminer

1) There is bug with log-file. I'm think it's related with static array or something else
For example:

/var/log/t-rex.log - OK
/var/log/t-rex/t-rex.log - OK
/var/log/miner/t-rex/t-rex.log - FAIL

2) ccminer API method "threads" not available but this not important for me. JSON more then enough

[HaloGenius]

any benchmark x16r algorithm?

After > 5 min
1050ti - 5.2 (intensity 18)
1060/3 - 9,8-10,1 MH (intensity 19)

[platinum4]

invalid shares for LUX

[7Seas]

x16r

[Bear in mind that X16R has a variable hashrate due to the ordering of the hashing algos]

Zotac 1080ti - 17.5mh/s - 23.4mh/s
Asus ROG 1080ti - 17.6mh/s - 25.2mh/s
EVGA 1080ti sc - 16.92mh/s - 22.9mh/s

Linux Ubuntu 18.01

No overclocking/underclock

Power limit at 180w - which is about 67% of total

Total for 2 x Zotac 1080ti + 2 x Asus ROG 1080ti + 1 x EVGA 1080ti sc is between 83mh/s and 120mh/s

970w total system

Could probably squeeze more out. Also should be noted that temps are the lowest I've seen on x16r

Lyra2z

Zotac 1080ti - 4250kh/s
Asus ROG 1080ti - 4098kh/s
EVGA 1080ti sc - 3960kh/s

Linux Ubuntu 18.01

No overclocking/underclock

Power limit is at 160w - which is about 59% of total

890w total system

[7Seas]

On the t-rex-0.5.7-linux-cuda9.2 release, maybe others I haven't checked them, however, there maybe a bug.

If you leave "stratum+tcp://" out the first 2 chars are removed from the server string and it won't connect.

Very minor but normally this prefix can be omitted.

[ManuBBXX]

Hello all
Thanks for the great miner.

I run the lyra2z algo for IFX coin
Anyway, I have 2 problems.

1 - The 0.5.7 version does not launch at all on my windows 10 setup (8700k, only 1 1080ti, latest nvidia drivers at this day)
2 - The 0.5.1 runs fine, but when I let the default intensity (17), it makes the display laggy. When I set intensity 16, there is no lag at all, but the hashrate drops from 4300 to 3200 mh/s, so not better than a ccminer.

Is there a way to fix one or all my problems ?

Thanks a lot

ps : other thing : contrary to ccminer wich is 55% power consumption on lyra2z, this miner takes 80% approx. Is it normal ?

[ethereumyeahhh]

I have a 8gpu rig and that has some 4 Zotac GTX mini on it.

[Egger]

Would it be possible to add wattage (W) consumption like ccminer/z-enemy?

[kerzNOberz]

For X16R my reported hashrates seem to vary wildly. 3 starts on a single 1080 Ti gives:

27MH/s

24MH/s

22MH/s

I let it run for ~10 minutes and the hashrate stays at these levels. I get that X16R hashrate can vary dramatically depending on the block, but this seems way out of whack.

Anyone else seeing this? Has anyone tested against the latest Z-enemy on x16r?

[kerzNOberz]

also this only seems to be an issue with X16R. All other algos seem normal and report consistent hashrates (including X16S).

[peteris-apse]

what would be recomended intensity for 1080ti rig on windows 10? miner is setting 17 by default