T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[jazz1984]

Hey,

How can I add new algos here?

Hello, IngerDev. T-rex is a closed source miner so you cant add or upgrade anything here, you can only use it "as it is".

[1714245701]

1714245701

[fabry1999]

Any plans to add x22i algo ?

[Dr_Victor]

Any plans to add x22i algo ?

I guess, yes.

[-Rodger]

Hello dev. 

I have been using this t-rex for windows for almost a week and like it very much.  I do have a question however concerning the fee.  More than happy to pay it as I do believe this miner is the faster then the others I have tried so far. 

My question is, if I start and stop my miner every hour, how will this affect my fee payouts?  I have shutdown setup in task scheduler to shutdown and restart every hour to make sure my 10 GPU's are all up and running.  Mining X16r can be a bit hard to hold a high overclock with low current, and I really do want all I can get out of my GPU's at minimal expense for electric.  This is the only reasonable answer I have right now, and it is working well.  But, I sure do not want to pay any extra fee for starting and stopping 24 times a day.

Thanks for your answer.

-Rodger

[trexminer]

Any plans to add x22i algo ?

Not yet, maybe in future releases

[trexminer]

Hello dev. 

I have been using this t-rex for windows for almost a week and like it very much.  I do have a question however concerning the fee.  More than happy to pay it as I do believe this miner is the faster then the others I have tried so far. 

My question is, if I start and stop my miner every hour, how will this affect my fee payouts?  I have shutdown setup in task scheduler to shutdown and restart every hour to make sure my 10 GPU's are all up and running.  Mining X16r can be a bit hard to hold a high overclock with low current, and I really do want all I can get out of my GPU's at minimal expense for electric.  This is the only reasonable answer I have right now, and it is working well.  But, I sure do not want to pay any extra fee for starting and stopping 24 times a day.

Thanks for your answer.

-Rodger

Hi Rodger,

Dev fee sessions kick in at random, so restarting the miner every hour won't affect dev fee payouts

[-Rodger]

Hi Rodger,

Dev fee sessions kick in at random, so restarting the miner every hour won't affect dev fee payouts

Thanks for the reply.

Another question just came up today.  I am mining Suprnova's RVNCoin Pool, stratum+tcp://rvn.suprnova.cc:6667, and have seen a disparity between the confessed hash rate presented on t-rex and the confirmed hash rate presented on the Suprnova pool.  It has been absolutely accurate ever since I had started mining this pool 4 or 5 days back. Today it is not. Is there anyway to find out what going?  It seems about 25% lower on the Suprnova pool then being reported by t-rex.

Thanks.

-Rodger

[moroz]

Hey dev!
Can you please fix "-r 0" flag behavior? It's impossible to setup multialgo mining. I noticed there is also --exit-on-connection-lost flag which doesn't really do anything in my case (first connection).
Example with "-r 0 --exit-on-connection-lost -T 5" flags:
20181018 22:58:41 Starting on: mine.zpool.ca:3643
20181018 22:58:41 ApiServer: HTTP server started on 0.0.0.0:4072
20181018 22:58:41 ApiServer: Telnet server started on 0.0.0.0:5072
20181018 22:58:41 WARN: GPU #1: PNY GeForce GTX 1080 Ti, intensity set to 24, 16777216 cuda threads
20181018 22:58:46 WARN: Connection with pool timed out. Trying to reconnect...
20181018 22:58:52 WARN: Connection with pool timed out. Trying to reconnect...

CCminer behavior with "-r 0" flag is simple. At launch try connect to the pool. If not possible, exit and don't waste time (~1 second). If yes - start mining.
Once the pool drops the connection for the first time, exit right away.



Other closed source competitors seem to have "correct" behavior, but i'd like to stick with t-rex mostly because of attitude.

Thanks!

[trexminer]

Thanks for the reply.

Another question just came up today.  I am mining Suprnova's RVNCoin Pool, stratum+tcp://rvn.suprnova.cc:6667, and have seen a disparity between the confessed hash rate presented on t-rex and the confirmed hash rate presented on the Suprnova pool.  It has been absolutely accurate ever since I had started mining this pool 4 or 5 days back. Today it is not. Is there anyway to find out what going?  It seems about 25% lower on the Suprnova pool then being reported by t-rex.

Thanks.

-Rodger

If you're still using the same version of T-Rex, i.e. nothing's changed on the miner's side, then something must be going on at the pool. Maybe pool luck or some internal issue on their side, not sure.

[trexminer]

Hey dev!
Can you please fix "-r 0" flag behavior? It's impossible to setup multialgo mining. I noticed there is also --exit-on-connection-lost flag which doesn't really do anything in my case (first connection).
Example with "-r 0 --exit-on-connection-lost -T 5" flags:
20181018 22:58:41 Starting on: mine.zpool.ca:3643
20181018 22:58:41 ApiServer: HTTP server started on 0.0.0.0:4072
20181018 22:58:41 ApiServer: Telnet server started on 0.0.0.0:5072
20181018 22:58:41 WARN: GPU #1: PNY GeForce GTX 1080 Ti, intensity set to 24, 16777216 cuda threads
20181018 22:58:46 WARN: Connection with pool timed out. Trying to reconnect...
20181018 22:58:52 WARN: Connection with pool timed out. Trying to reconnect...

CCminer behavior with "-r 0" flag is simple. At launch try connect to the pool. If not possible, exit and don't waste time (~1 second). If yes - start mining.
Once the pool drops the connection for the first time, exit right away.



Other closed source competitors seem to have "correct" behavior, but i'd like to stick with t-rex mostly because of attitude.

Thanks!

Hi moroz,

Thanks for the bug report. We'll fix it in the next version. You may want to join our Discord channel where we usually publish our test/beta releases. The Discord link is on the first page.

[tomaroc]

Hi,

Results before and after updating drivers and CUDA software.
https://www.imageupload.co.uk/images/2018/10/20/update.jpg

A little less stability
4 x GeForce GTX 980 TI, win10

[sefirotius]

how many mh get 1060 on rvn?

[pit5]

how many mh get 1060 on rvn?

GPU #0: Gigabyte GeForce GTX 1060 3GB - 9679.81 kH/s, [T:75C, P:88W, F:32%, E:113kH/W]
GPU #1: Gigabyte GeForce GTX 1060 3GB - 9657.39 kH/s, [T:70C, P:88W, F:30%, E:114kH/W]
GPU #2: Gigabyte GeForce GTX 1060 3GB - 9659.75 kH/s, [T:74C, P:79W, F:35%, E:114kH/W]
GPU #3: Gigabyte GeForce GTX 1060 3GB - 9661.77 kH/s, [T:70C, P:85W, F:30%, E:114kH/W]
GPU #4: Gigabyte GeForce GTX 1060 3GB - 9621.33 kH/s, [T:68C, P:78W, F:30%, E:113kH/W]
GPU #5: Gigabyte GeForce GTX 1060 3GB - 9582.04 kH/s, [T:70C, P:76W, F:30%, E:113kH/W]

[owen444]

witch version i must install i have Nvidia 1070 and win 10 64bit
Windows:
CUDA 9.1: https://mega.nz/#!GQVxQA7L!SppCdxuy8ShbHclv0oiXuAxA1mHYllo2Okx2q8-aFIs
CUDA 9.2: https://mega.nz/#!OYNXEAhQ!abLofQ0_GZRl-HF8XjzoBH5kj664OI9beSl2nbdbFhA
CUDA 10.0: https://mega.nz/#!qVVFGaLR!B9lHI4M2zLiKLGVZ7pu1Bb_cwCjyJ-73ttE6BjCr2Kw
 what difrence betwen cuda 9.2 and 10

[Dr_Victor]

I'd recommend CUDA 9.2 with 399.24 drivers.

[M4stHav3]

Is there some command to restart miner in case of error?

[owen444]

I'd recommend CUDA 9.2 with 399.24 drivers.

and drivers 416.16

[slackgarry]

Hey guys, Whats the minimum CUDA version supported by this miner Please...

[tomaroc]

Hey guys, Whats the minimum CUDA version supported by this miner Please...

CUDA 9.1 - but works better on CUDA 9.2 and NVIDIA 399 drivers.
I update to version cuda 10 & NVIDIA 416 drivers and I'm disappointed.
Miner is not yet well optimized for new drivers.

[Elange]

Is ver 0.7.1 available? I hear people mentioning 0.7.1.