T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner

[trexminer]

how -i works ? i have somes gtx 1060 3gb , how do i set -i for it ? 20?

You don't have to set it yourself, the miner will use the default one, and usually it's a good choice

[trexminer]

0.18.3
* (ethash) Minor performance improvements for Pascal GPUs on some configurations
* (ethash) Allow mining at a decreased hashrate when DAG no longer fits GPU memory
* (UI) Print the number of accepted/total shares generated by each GPU in the GPU hashrate table

Bug fixes:
* (Web UI) "Miner shutdown" button sometimes disappears

0.18.5
Bug fixes:
* (ethash) Miner reports absurdly high hashrate when switching coins on nicehash or similar pools

[pepi]

Tell me is any command or something that will tell me what worker has found block?
I am on pool, and pool says that I have found block : but T rex summary show no block has been found.

[miner29]

I dont know of any mining software when used on a pool can tell you this.  Solo mine and you will know as it will be the accept share...on pool mining you wont see that only the pool side interface can show you that.

[JayDDee]

I dont know of any mining software when used on a pool can tell you this.  Solo mine and you will know as it will be the accept share...on pool mining you wont see that only the pool side interface can show you that.

Several miners report a solved block when sharediff >= netdiff.

[pepi]

I dont know of any mining software when used on a pool can tell you this.  Solo mine and you will know as it will be the accept share...on pool mining you wont see that only the pool side interface can show you that.

Several miners report a solved block when sharediff >= netdiff.

Example (names) of those miners please!

[JayDDee]

Example (names) of those miners please!

Out of respect for TRex devs I don't promote other software in their thread, but the answer is
staring you in the face.

[miner29]

I see shares accepted when pool mining but not blocks (except on pool sitej.  When i solo mine a share accepted is a block.  Just wondering about this example...because a pool accepting the share is not the same as solo mining accepting a share.  The first is not necessarily (most likely notj a block...but later is a block.

[JayDDee]

I see shares accepted when pool mining but not blocks (except on pool sitej.  When i solo mine a share accepted is a block.  Just wondering about this example...because a pool accepting the share is not the same as solo mining accepting a share.  The first is not necessarily (most likely notj a block...but later is a block.

This is off topic for this thread because I don't know how TRex reports it, but the math is simple.

Share of pool: share diff >= stratum target diff
Solved block: share diff >= network diff

[Marvell2]

0.18.3
* (ethash) Minor performance improvements for Pascal GPUs on some configurations
* (ethash) Allow mining at a decreased hashrate when DAG no longer fits GPU memory
* (UI) Print the number of accepted/total shares generated by each GPU in the GPU hashrate table

Bug fixes:
* (Web UI) "Miner shutdown" button sometimes disappears

0.18.5
Bug fixes:
* (ethash) Miner reports absurdly high hashrate when switching coins on nicehash or similar pools

progpow-veil not working with new version

[trexminer]

progpow-veil not working with new version

Could you post your cmd line / log file? I've seen many reports from other people saying the miner is working fine. Thanks.

[sxemini]

is it possible to mine eth and zil like other miners?

[trexminer]

is it possible to mine eth and zil like other miners?

It will be possible in the next version.
I mean, technically it is possible even with 0.18.5 but the next version will have an option to cache the DAG for ZIL to avoid DAG re-build.

[ctp9]

T-Rex v0.18.6 on Hive OS produces a connection error on some of my miners (but not on all of them):

Code:

20201108 03:44:03 ERROR: No connection, retry after 10 seconds
20201108 03:44:13 Using protocol: stratum3.
20201108 03:44:13 Extranonce is set to: 1684
20201108 03:44:13 Authorizing...
20201108 03:44:13 New target is set to: 0x00000009f5ffffffffff80000000000000000000000000000000000000000000
20201108 03:44:13 WARN: failed to stratum2-authorize on europe.kawpow-hub.miningpoolhub.com:20611: pool rejected connection, result {
        "error" : null,
        "id" : 3,
        "result" : false

v0.18.5 doesn't produce this error. Any ideas?

[parshkov]

WARN: NVML: can't get power for GPU #0, not supported

What is it? Help please

[sxemini]

T-Rex v0.18.6 on Hive OS produces a connection error on some of my miners (but not on all of them):

Code:

20201108 03:44:03 ERROR: No connection, retry after 10 seconds
20201108 03:44:13 Using protocol: stratum3.
20201108 03:44:13 Extranonce is set to: 1684
20201108 03:44:13 Authorizing...
20201108 03:44:13 New target is set to: 0x00000009f5ffffffffff80000000000000000000000000000000000000000000
20201108 03:44:13 WARN: failed to stratum2-authorize on europe.kawpow-hub.miningpoolhub.com:20611: pool rejected connection, result {
        "error" : null,
        "id" : 3,
        "result" : false

v0.18.5 doesn't produce this error. Any ideas?

Anyone knows the monitoring api port on HiveOs for T-Rex?

[trexminer]

0.18.8

Changes from 0.18.5
* (ethash, kawpow, progpow) Reduce GPU memory consumption (by ~6MB)
* Add etchash algorithm for upcoming ETC fork
* Cache DAG for epoch 0 when mining ETH+ZIL (run with --extra-dag-epoch 0 parameter)

Bug fixes:
* (ethash) kernels 4 and 5 generate incorrect shares if DAG size > 4GB (e.g. when mining ETC)
* (ethash) out of memory error in "zombie" mode
* worker parameter is ignored if placed under pools section in a config file
* Various web UI fixes
* The miner now reports hashrate every 2 seconds in benchmark mode

[dhan000]

0.18.8

Changes from 0.18.5
* (ethash, kawpow, progpow) Reduce GPU memory consumption (by ~6MB)
* Add etchash algorithm for upcoming ETC fork
* Cache DAG for epoch 0 when mining ETH+ZIL (run with --extra-dag-epoch 0 parameter)

Bug fixes:
* (ethash) kernels 4 and 5 generate incorrect shares if DAG size > 4GB (e.g. when mining ETC)
* (ethash) out of memory error in "zombie" mode
* worker parameter is ignored if placed under pools section in a config file
* Various web UI fixes
* The miner now reports hashrate every 2 seconds in benchmark mode

Can you give a command example for ETH + ZIL. pool ezil.me

[kibirai]

0.18.8

Changes from 0.18.5
* (ethash, kawpow, progpow) Reduce GPU memory consumption (by ~6MB)
* Add etchash algorithm for upcoming ETC fork
* Cache DAG for epoch 0 when mining ETH+ZIL (run with --extra-dag-epoch 0 parameter)

Bug fixes:
* (ethash) kernels 4 and 5 generate incorrect shares if DAG size > 4GB (e.g. when mining ETC)
* (ethash) out of memory error in "zombie" mode
* worker parameter is ignored if placed under pools section in a config file
* Various web UI fixes
* The miner now reports hashrate every 2 seconds in benchmark mode

From version 0.18.8-win-cuda11.1  I get Trojan:Script/Wacatac.B!ml . On previous version 0.18.7 no alerts.

Thanks.

[SiNeReiNZzz]

New project for miners, absolute free, this project development "ETHlargement" - EthereumPill release
Support Algo: Ethash/KawPow/ProgPow
~SCAM~

ᗌ ETHPIL-Link (Github) ᗏ

Thread: https://bitcointalk.org/index.php?topic=4432704.msg55580194#msg55580194 <---- DELETE PLEASE

Virus Total: https://www.virustotal.com/gui/file/8e90944c2a3fc8cce71b0176dbad8f0c5c67b7e970bfc5d1473d35260067cabf/details

Profile Link: shadow2288 <---- BAN PLEASE

Archive- LINK

Code:

https://ethereumpill.info/ProjectEthereumPill.zip