lolMiner 1.64: Fastest Kaspa miner in market

[safar1980]

Recently, a new version of the miner lolMiner 1.74 has appeared. Added Ironfish mining.:
"Added support for Ironfish mining (use -a IRONFISH for putting out your rod) for Nvidia Pascal and newer and AMD Vega and newer GPUs. (AMD Vega require rocm based drivers). Fee is 0.75%.
This version uses the pool protocol extension of TeamRedMiner and should be compatible to all pools supporting their protocol as well as their solo mining protocol fork of Ironfish node."
Links can be found in 1 post by Lolliedieb (OP)

Windows

The next version will support Windows.

[1715273797]

1715273797

[1715273797]

1715273797

[1715273797]

1715273797

[FP91G]

lolMiner 1.75

Improved Ironfish mining speed by 4-5% on all supported GPUs.
Added support to mine Alephium on AMD GCN3 (RX 400, Rx500) and newer GPUs
Added support to mine Ironfish on AMD GCN3 gpus
Renamed Blake3-Ironfish to Blake3-Iron to make it identical to competing miner softwares and better detectable by some mining OS

Fixes
Fixed a bug causing to little shares submitted when mining Alephium on Nvidia GPUs
Fixed a bug causing high stale and defect share counts when mining Ironfish on AMD GPUs
Fixed a bug causing AMD RX 7900 series GPUs not starting up Ironfish mining
Fixed a bug causing only defect shares on Ironfish mining when a pool did not zero the Grafitti part of the block header (e.g. ezil pool)

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.75

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

[Dowper_]

My test with RTX 4090 & 4070 Ti - IronFish Hashrate & Profit (lolMiner 1.75) - https://youtu.be/UhiprBTja38

[FP91G]

lolMiner 1.76

Changes
Improved performance of Blake3-Alephium mining on Nvidia Turing and newer cards by 15-18%.
Improved performance of Blake3-Ironfish mining on Nvidia Turing and newer cards by 9-11%.
Slightly improved performance of Blake3-Ironfish mining on AMD cards by ~0.8%.
Slightly improved performance of Nexa mining on Nvidia Turing and newer cards by ~0.6%.
Updated dag repair tables for OctaSpace, ETHW & ETC mining to cover current epochs
Added option --screen to enable a special mining mode in case a GPU is connected to a screen to prevent shuttering. The value -1 activates this mode for all cards, any value above or equal 0 will activate this mode for the GPU with index equal to the provided number. E.g. --screen 0 will active it for the first card detected by the miner.
Note: it is in the nature of this option to cost some performance when used. At the moment this option is available for Ethash (AMD cards), Kaspa (Nvidia), Nexa, Alephium and Ironfish solvers.
Fixes
Fixed a bug with Alephium mining on RTX4090 producing duplicated shares.
Fixed a bug making some Nvidia only rigs to need --no-cl parameter to mine Ironfish.
Fixed a bug causing Nvidia Ampere-based CMP HX GPUS & Nvidia Ax000 series not to mine blake3 algorithms.
Fixed a bug rarely causing defect shares on AMD cards when mining Ironfish.
Update guides

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.76

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

My test with RTX 4090 & 4070 Ti - IronFish Hashrate & Profit (lolMiner 1.75) - https://youtu.be/UhiprBTja38

It is better to mine a 4090 video card with RADIANT, heating it less.

[Dowper_]

My test with RTX 4090 & 4070 Ti - IronFish Hashrate & Profit (lolMiner 1.75) - https://youtu.be/UhiprBTja38

It is better to mine a 4090 video card with RADIANT, heating it less.

I have been mining Radiant for a few weeks, less heat and most profitable.

[FP91G]

My test with RTX 4090 & 4070 Ti - IronFish Hashrate & Profit (lolMiner 1.75) - https://youtu.be/UhiprBTja38

It is better to mine a 4090 video card with RADIANT, heating it less.

I have been mining Radiant for a few weeks, less heat and most profitable.

And I'll probably turn off mining for now. I don't like profit lately and in the summer it's better to let the video cards rest. Now I would definitely not include a 4090 video card with a payback period of 9 years for mining, because 50 cents a day is very little for such an expensive video card.

[lijingang]

Hi LOLminer, can you please help to add the ability to mine apepe on GPU? See please reply, thank you.

Hello, I recently discovered a new interesting project (apepepow) that claims to be designed for the Monero (XMR) meme enthusiast community, developed by Monero developers. Is anyone interested in this project or has more information?I just read an article on a cryptocurrency blog about apepepow as an interesting meme coin for the monero community. I would like to know what people think about this project?

New minable pow coin: apepepow (apepe)
Monroe community meme coin, the first privacy meme coin, Monero developers, no pre-mining, no ICO, fair mining, let apepepow make pepe again
Algorithm: memehash
Web site: https://apepepow.com
Blocks the browser: https://scan.apepepow.com
Mining Pool:: https://ekapool.com/apepe/
bitcointalk:https://bitcointalk.org/index.php?topic=5455236.0
Discord: https://discord.gg/s5ZgwcnGzT
github:https://github.com/APEPEPOW/APEPEPOW
cpuminer-memehash:https://github.com/APEPEPOW/cpuminer-memehash

[FP91G]

Hi LOLminer, can you please help to add the ability to mine apepe on GPU? See please reply, thank you.

Hello, I recently discovered a new interesting project (apepepow) that claims to be designed for the Monero (XMR) meme enthusiast community, developed by Monero developers. Is anyone interested in this project or has more information?I just read an article on a cryptocurrency blog about apepepow as an interesting meme coin for the monero community. I would like to know what people think about this project?

New minable pow coin: apepepow (apepe)
Monroe community meme coin, the first privacy meme coin, Monero developers, no pre-mining, no ICO, fair mining, let apepepow make pepe again
Algorithm: memehash
Web site: https://apepepow.com
Blocks the browser: https://scan.apepepow.com
Mining Pool:: https://ekapool.com/apepe/
bitcointalk:https://bitcointalk.org/index.php?topic=5455236.0
Discord: https://discord.gg/s5ZgwcnGzT
github:https://github.com/APEPEPOW/APEPEPOW
cpuminer-memehash:https://github.com/APEPEPOW/cpuminer-memehash

memehash algorithm uses pepepow coin
https://miningpoolstats.stream/pepepow

while only SRBMiner works there
https://mining4people.com/pool/pepecoin-pplns
I am not a developer, but I think that the team will only add popular coins and optimize the miner for these coins. And it looks like a temporary coin with no future prospects. This is my opinion, not the developer of the miner.

[FP91G]

lolMiner 1.76a

Fixed a bug causing split pool connections for ZIL mining not working since the epoch change
Fixed a bug causing ZIL dag cache on Nvidia GPUs to not work since the epoch change
Fixed a bug causing a defect ZIL dag to be created on AMD GPUs when mining ETC+ZIL

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.76a

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

[zombezi]

"false: unsupported device or driver version"

such a message is written by the program at startup for 3 out of 7 cards. all AMD RX 470 cards, BEAM mining, other mining programs do not have this

[FP91G]

"false: unsupported device or driver version"

such a message is written by the program at startup for 3 out of 7 cards. all AMD RX 470 cards, BEAM mining, other mining programs do not have this

If you use Windows, then check which driver versions the miner developer recommends using.
BEAM is bad for AMD RX 470 mining because you can mine Dynex with big profit and 30-40 watts less power consumption on each video card. If you have free electricity, then there is no point in overheating video cards anyway.

[FP91G]

lolMiner 1.77b
Changes
Added support to mine SHA512_256D used for Radiant (RXD). Use -a RADIANT to mine it, fee is 0.75%. Supported GPUs: AMD RX 470 - 590, Vega (requires rocm drivers) and all Navi and newer, Nvidia Pascal and newer.
Added support to mine Ethash B3 used for Rethereum (RETH). Use -a ETHASHB3 to mine it, fee is 1.0%. Supported GPUs: AMD Navi and newer, Nvidia Pascal and newer.
Added ethash dag correction tables for epochs 13-29 (PowBlocks, XPB), 112-129 (OCTA) and 608 - 619 (ETHW)
Fixes
Fixed a bug in Ethash solvers for AMD Navi and newer and Nvidia GPUs that caused a crash when mining at some low epochs. This fix will allow to mine PowBlocks (XPB).
Fixed a bug introduced in 1.76a causing CTXC mining to not work.
(1.77a): Fixed a bug causing RXD mining to not work (bug was new in 1.77)
(1.77b): Fixed a bug causing Alephium and Ironfish mining to not work (bug was new in 1.77)

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.77b


Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

[Dowper_]

lolMiner 1.77b
Changes
Added support to mine SHA512_256D used for Radiant (RXD). Use -a RADIANT to mine it, fee is 0.75%. Supported GPUs: AMD RX 470 - 590, Vega (requires rocm drivers) and all Navi and newer, Nvidia Pascal and newer.
Added support to mine Ethash B3 used for Rethereum (RETH). Use -a ETHASHB3 to mine it, fee is 1.0%. Supported GPUs: AMD Navi and newer, Nvidia Pascal and newer.
Added ethash dag correction tables for epochs 13-29 (PowBlocks, XPB), 112-129 (OCTA) and 608 - 619 (ETHW)
Fixes
Fixed a bug in Ethash solvers for AMD Navi and newer and Nvidia GPUs that caused a crash when mining at some low epochs. This fix will allow to mine PowBlocks (XPB).
Fixed a bug introduced in 1.76a causing CTXC mining to not work.
(1.77a): Fixed a bug causing RXD mining to not work (bug was new in 1.77)
(1.77b): Fixed a bug causing Alephium and Ironfish mining to not work (bug was new in 1.77)

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.77b


Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

Finally we can mine Radiant with lolMiner, thanks!

[FP91G]

lolMiner 1.78

Added support for Beam Hash III on Nvidia RTX 4000 and AMD RX 7000 generation GPUs
Added support for Heavyhash-Karlsen for Nvidia Pascal and newer and AMD RX 6000 and newer GPUs. Use --algorithm KARLSEN to mine it, fee is 1%
Added multiple dual mining options for EthashB3 algorithm (Rethereum). The algorithm can now be used with --dualmode to be set to ALEPHDUAL (Blake3 - Alephium), FISHDUAL (Blake3 - Ironfish), RXDDUAL (Sha512 / 256D, Radiant) or KARLSENDUAL (HeavyHash-Karlsen). Fee rule for dual mining: its the same as with the individual algorithms, so if EthB3 takes 1% and Radiant mining 0.75 as individual algorithms, you pay 1% on the EthB3 portion and 0.75% on the Radiant portion when dual mining. Usage is the same as described here for Ethash.
The algorithms ALEPH, ETHASHB3, IRONFISH, KARLSEN, NEXA and RADIANT now support splitting the hashrate analog to the options described here. Use --dualmode SPLIT-X to put X% of the hashrate to the 2nd connection given by --dualuser and --dualpool
When using split mining, the hashrate will now be displayed as one solver as well in stats as in the API. This gives a more consistent representation.
Reduced stale shares on algorithms ALEPH, ETHASHB3, IRONFISH, NEXA and RADIANT.
Windows: Updated GUI tool
Added support for the FishHash algorithm (Future Ironfish PoW) for testing purposes. Use --algorithm FISHHASH-TEST to connect to a current Ironfish pool and run the shares just against the build in CPU verify. In this mode the difficulty is 1/256 of what the usual Blake3 difficulty would be. Use --algoriithm FISHHASH-TESTNET to connect to a real testnet pool and mine there including submitted shares.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.78

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

Now this is the best miner for karlsencoin(KLS) mining

[safar1980]

lolMiner 1.78
Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

lolMiner 1.78a

Fixed a bug causing low amount of Karlsen shares in Windows (introduced in 1.78)

[Spill]

Decred has gone back to gpu mining,  could you guys ad blake3 pow for that coin?

[FP91G]

lolMiner 1.79

Changes
Added Karlsen support for AMD RX 400, RX 500, RX Vega*, Radeon VII* and RX 5000 generation GPUs. This is for the stand alone solver only and not yet for RTH+KLS dual mining. * RX Vega and Radeon VII requiereing an OpenCL driver with version number 3261.0 or higher.
Slightly improved Karlsen solvers for Nvidia GPUs by approximately 0.5 (Ampere) to 3 % (Pascal cards)
Fixes
Fixed a bug causing FISHHASH-TESTNET solver not submitting shares to testnet server
Fixed a bug causing 1.78 added dual mining codes to not start up on some Linux systems
Fixed a bug causing multiple algorithms (RTH, NEXA, Radiant) not to start up on some systems in Windows
Fixed a bug causing KLS solver to sometimes segmentation fault in Linux
Fixed a bug causing AMD RDNA2 & RDNA3 cards to have low poolside Karlsen hashrate on older drivers. Hint: please update to drivers with OpenCL version above 3261.0 to get best possible performance out of your cards, cause the fix did cost a bit of raw speed.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.79


Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

Now the Karlsen coin can be mined on old video cards, but the hashrate is still weak.

[jgonzi]

lolMiner 1.80 Latest

Changes
Massively improved Karlsen mining performance on AMD RX 400, AMD RX 500 (both +45%) and AMD Vega 56 / 64 (both +92%).
Improved Karlsen mining performance on AMD Radeon VII and AMD RX 5000 GPUs (+12%).
Note: All AMD Vega and VII cards still need a driver that reports its Driver version as 3261.0 (HSA1.1,LC) or higher. As far as we know all mining operation systems offer a driver packed that is new enough - but it might be this is the latest.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.80

[FP91G]

lolMiner 1.81

Changes
Added support to mine Heavyhash-Pyrin (-a PYRIN) on Nvidia Turing and newer / AMD Navi and newer. Fee is 1%. Note: requires a Pyrin stratum pool or adjusted stratum bridge. Please keep an eye open on those.
Added support to dual mine EthashB3 and Heavyhash-Pyrin on Nvidia Turing and newer / AMD Navi and newer. Fee is 1% + 1%
Added support to dual mine EthashB3 and Heavyhash-Karlsen on AMD RX 5000 series.
https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.81

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

[igotek]

--cclk 1500 --mclk 810

is it possible to set these values acording to algortihm ?

For example:
nexapow:  --cclk 1500 --mclk 810
karlsenhash: --cclk 1680 --mclk 810
etchash: --cclk 1150 --mclk 2900

I use HiveOS for all of my rigs.
I had to change manually this values each time I change the algo.
We can put them all in extra config then the miner automatically select it acording to the algorithm.