[ANN] [HVC] Heavycoin - Ultra-secure, Decentralized Block Reward Voting, Fast

[skychilled]

I was wondering that, will you guys turn off your mining rig for earth hour  ?

[1714251283]

1714251283

[1714251283]

1714251283

[1714251283]

1714251283

[jjj0923]

used:

./cgminer --scrypt -o stratum+tcp://stratum02.heavycoinpool.com:5333 -u xxx -p 123 -w 256 -g 2  --thread-concurrency 18944 --intensity 13 --heavy --vote 512 --no-submit-stale

Are you sure you want to vote 512?    

  I'm groping here and just trying recommendations from others....

[freethrow]

More miners, price not rising. Went from 900 HVC yesterday to 650 today with exact same setup. Barely worth it now. Hope the price goes up.

That's the nature of virtual coin mining, it will always attract miners until the profit is pushed down to a "barely worth it" level.

[cayars]

More miners, price not rising. Went from 900 HVC yesterday to 650 today with exact same setup. Barely worth it now. Hope the price goes up.

Well, that's the cycle.
Coin gets popular.
Lot of people start mining it.
Net share rate explodes / user share decreases
People do math and think the ROI is low so switch to something else
Net Hash rate goes down /user share goes up

At least with HVC we don't have to worry (yet) about auto-switching pools and dumping/exchanging coins which hurts the value of the coin.

It really comes down to how you mine.  Do you mine and quickly sell or hold for future speculation of profit?

Keep in mind that it can make a lot of sense to mine "at a loss" for now if you are holding your coins.  If the coin being mined now is worth ten cents but in 3 months is worth 60 cents...
Of course the coin worth 10 cents now could be worth 1 cent in 3 months too...

Not sure that really helped, but that my 2 coins worth of info.

[tinus42]

i'm having 3 290, with the newest miner,each can reach 21m, but one of the 3 doesn't work, anyone has some ideas about this

hi,

what is your setings??

I am only able to reach 17 mH/s

greetings

Make sure you have the latest optimized miner.  And FWIW TC settings mean nothing when mining HVC. Mine are all set @ 0.

Where can I get the latest miner? I already upgraded to the cpu miner with 20% more performance. Or do you mean gpu miner?

[coin_coin]

come on guys,  vote for HVC at Cryptsy https://www.cryptsy.com/coinvotes

[Rasdisputin]

Anybody mining at heavycoinpool.com? My estimated payout has been hovering around 3 for 8 hours... Are there such things as never ending rounds?  Frustrating. 11m/hash - 3 coins in 8 hours. Almost zero invalids and a decent share rate.

i left that pool after only getting 24 coins in 8 hrs at 124 mh/s.

I left after spending a week to get 50 coins with my 15MH/s...

Damn. I'm glad it's not just me... but what's up with that? Small pool size? I've tried just about every pool. Currently at 1GH. Lack of dashboard means I'll have to wait another 24 hours to get a good feel for profitability. :fingerscrossed: 

[Ik88]

now normal result 290x - 23500, 290 - 21000, 280x - 16000, 270 - 9500 ?

[Speedie]

used:

./cgminer --scrypt -o stratum+tcp://stratum02.heavycoinpool.com:5333 -u xxx -p 123 -w 256 -g 2  --thread-concurrency 18944 --intensity 13 --heavy --vote 512 --no-submit-stale

[12:08:22] Failed to create postcalc_hash thread
 [12:08:22] Failed to create postcalc_hash thread
 [12:08:22] Failed to create postcalc_hash thread
 [12:08:22] Failed to create postcalc_hash thread
 [12:08:22] Failed to create postcalc_hash thread
 [12:08:24] Shutdown signal received.           
 [12:08:24]
Summary of runtime statistics:
                   
 [12:08:24] Started at [2014-03-29 12:07:52]                   
 [12:08:24] Pool: stratum+tcp://stratum02.heavycoinpool.com:5333                   
 [12:08:24] Runtime: 0 hrs : 0 mins : 32 secs                   
 [12:08:24] Average hashrate: 2.6 Megahash/s                   
 [12:08:24] Solved blocks: 0                   
 [12:08:24] Best share difficulty: 6                   
 [12:08:24] Share submissions: 1                   
 [12:08:24] Accepted shares: 0                   
 [12:08:24] Rejected shares: 1                   
 [12:08:24] Accepted difficulty shares: 0                   
 [12:08:24] Rejected difficulty shares: 0                   
 [12:08:24] Reject ratio: 100.0%                   
 [12:08:24] Hardware errors: 115998                   
 [12:08:24] Utility (accepted shares / min): 0.00/min                   
 [12:08:24] Work Utility (diff1 shares solved / min): 0.00/min
                   
 [12:08:24] Stale submissions discarded due to new blocks: 0                   
 [12:08:24] Unable to get work from server occasions: 0                   
 [12:08:24] Work items generated locally: 84                   
 [12:08:24] Submitting work remotely delay occasions: 0                   
 [12:08:24] New blocks detected on network: 1
                   

You have contradictory parameters in your command line, one telling CGMiner to use the scrypt kernel and the other to use the heavy kernel. Try:

./cgminer --heavy -o stratum+tcp://stratum02.heavycoinpool.com:5333 -u xxx -p 123 -w 256 -g 2  --thread-concurrency 18944 --intensity 13 --vote 512 --no-submit-stale

[loicatraile]

Heavycoiners!
 vote LOW

./cgminer --heavy --vote 1 or 1-150 -o stratum+tcp://stratum02.heavycoinpool.com:5333 -u x -p 123 -w 256 -g 2  --thread-concurrency 18944 --intensity 13  --no-submit-stale

[freethrow]

Keep in mind that it can make a lot of sense to mine "at a loss" for now if you are holding your coins.

It never makes sense to mine at a loss, you'll get more coins for the same money by switching your equipment off and buying the coins on an exchange instead.

[Amph]

Keep in mind that it can make a lot of sense to mine "at a loss" for now if you are holding your coins.

It never makes sense to mine at a loss, you'll get more coins for the same money by switching your equipment off and buying the coins on an exchange instead.

or just buy heavycoin directly, btc are cheap too now...

[Just4andy]

can we have the miner in the original post?

that miner in the pool is full of trojan

[cayars]

Keep in mind that it can make a lot of sense to mine "at a loss" for now if you are holding your coins.

It never makes sense to mine at a loss, you'll get more coins for the same money by switching your equipment off and buying the coins on an exchange instead.

Ya think?

Let me give you an example.  If you mined BTC right now at exactly $500 USD trade value and earned one BTC but it costs you $10 in electricity.  But then held it for a month until BTC goes back up to $650 did you not come out $140 ahead?

In this example you saved $10 in electricity while I made $140 for a difference of $150.  I can still buy/sell coins also while mining.

It's all a personal choice of course.  But if your speculation of the coin says it's going to increase in value then it can certainly make sense to mine at a loss TODAY for higher value TOMORROW as the example above shows.

Carlo

[SimkoMiner]

Can someone advice what is the fastest and cheapest way to buy bitcoin with CreditCard? I tried SEPA payment via Payeer.com -> BTC-e, but it took cca 1 week to receive the payment on Payeer.com, then it was matter of seconds to transfer payment from Payeer.com to Btc-e.

[rosechose00]

i'm having 3 290, with the newest miner,each can reach 21m, but one of the 3 doesn't work, anyone has some ideas about this

hi,

what is your setings??

I am only able to reach 17 mH/s

greetings

{
"pools" : [
   {
      "url" : "stratum+tcp://hvcpool.1gh.com:5333",
      "user" : "--------------------------------",
      "pass" : "'VIP"
   }
]
,
"intensity" : "8,8,8",
"vectors" : "1,1,1",
"worksize" : "64,64,64",
"kernel" : "heavy,heavy,heavy",
"lookup-gap" : "0,0,0",
"gpu-threads" : "1,1,1",
"thread-concurrency" : "20480,20480,20480",
"gpu-engine" : "1150-1150,1150-1150,1150-1150",
"gpu-fan" : "0-100,0-100,0-100",
"gpu-memclock" : "1250,1250,1250",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "0,0,0",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "95,95,95",
"temp-overheat" : "90,90,90",
"temp-target" : "85,85,85",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"log-dateformat" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "60",
"heavy" : true,
"vote" : "1",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[freethrow]

Ya think?

Let me give you an example.  If you mined BTC right now at exactly $500 USD trade value and earned one BTC but it costs you $10 in electricity.  But then held it for a month until BTC goes back up to $650 did you not come out $140 ahead?

In this example you saved $10 in electricity while I made $140 for a difference of $150.

No, you came out $10 down as you could have just bought the BTC instead and been $150 up instead of only $140 up.

[loicatraile]

Heavycoin is a good coin,it works good,I am mining it

remember to vote low 1 (increase HVC price) to balance those who vote 1024 #

[massiveman]

Keep in mind that it can make a lot of sense to mine "at a loss" for now if you are holding your coins.

It never makes sense to mine at a loss, you'll get more coins for the same money by switching your equipment off and buying the coins on an exchange instead.

Ya think?

Let me give you an example.  If you mined BTC right now at exactly $500 USD trade value and earned one BTC but it costs you $10 in electricity.  But then held it for a month until BTC goes back up to $650 did you not come out $140 ahead?

In this example you saved $10 in electricity while I made $140 for a difference of $150.  I can still buy/sell coins also while mining.

It's all a personal choice of course.  But if your speculation of the coin says it's going to increase in value then it can certainly make sense to mine at a loss TODAY for higher value TOMORROW as the example above shows.

Carlo

i get your point but if you are mining at a loss surely it's better to mine at a profit on another coin, sell and then convert that immediately into HVC? that way you get the best of both worlds.

[nanoprobe]

i'm having 3 290, with the newest miner,each can reach 21m, but one of the 3 doesn't work, anyone has some ideas about this

hi,

what is your setings??

I am only able to reach 17 mH/s

greetings

Make sure you have the latest optimized miner.  And FWIW TC settings mean nothing when mining HVC. Mine are all set @ 0.

Where can I get the latest miner? I already upgraded to the cpu miner with 20% more performance. Or do you mean gpu miner?

GPU miner. Get it here.