pnosker
|
|
September 08, 2014, 09:42:27 PM |
|
anyone ever read a simple instruction on how to run a vericoin wallet on a raspberry pi?
my blackcoin raspi wallet is running flawlessly and i'm sure that the vericoin community can come up with an instruction too
thanks in advance!
Yeah, that would be great. Also looking for a Raspberry Pi Wallet. I tried to compile it for ARM some time ago, but wasnt successful A raspberry Pi wallet would be perfect for staking .... There's certain flags you have to set when you compile it. Can't remember off the top of my head but it had to do with sse extentions I think? I'll check, hang on... edit: okay so I don't have the source on me but if you remove the "-msse2" from CXXFLAGS in buildfile.unix you should be good. ehm. maybe you can give more and detailed information? noob here Try the following: sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev git clone https://github.com/vericoin/rpicd vericoin qmake make
|
Support the VeriFund Endowment. VRC: VFEndownxxnHea9mv59kZx8c7TysGbndYx
|
|
|
Jeff Jefferson
|
|
September 08, 2014, 09:43:59 PM |
|
anyone ever read a simple instruction on how to run a vericoin wallet on a raspberry pi?
my blackcoin raspi wallet is running flawlessly and i'm sure that the vericoin community can come up with an instruction too
thanks in advance!
Yeah, that would be great. Also looking for a Raspberry Pi Wallet. I tried to compile it for ARM some time ago, but wasnt successful A raspberry Pi wallet would be perfect for staking .... There's certain flags you have to set when you compile it. Can't remember off the top of my head but it had to do with sse extentions I think? I'll check, hang on... edit: okay so I don't have the source on me but if you remove the "-msse2" from CXXFLAGS in buildfile.unix you should be good. ehm. maybe you can give more and detailed information? noob here Try the following: sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev git clone https://github.com/vericoin/rpicd vericoin qmake make thank you, will do and report!!!
|
|
|
|
YoyodyneSystems
Legendary
Offline
Activity: 1386
Merit: 1023
|
|
September 08, 2014, 09:47:02 PM |
|
Observing the order book for the last 48 hours I can see there is clearly some interest that has returned from large players. Lot's of pushing and pulling and big walls on both sides.
Everything I see looks like, to me at least, very good signs of a near term future rise. Coming from my experience of watching such things.
|
|
|
|
Jeff Jefferson
|
|
September 08, 2014, 10:02:52 PM |
|
anyone ever read a simple instruction on how to run a vericoin wallet on a raspberry pi?
my blackcoin raspi wallet is running flawlessly and i'm sure that the vericoin community can come up with an instruction too
thanks in advance!
Yeah, that would be great. Also looking for a Raspberry Pi Wallet. I tried to compile it for ARM some time ago, but wasnt successful A raspberry Pi wallet would be perfect for staking .... There's certain flags you have to set when you compile it. Can't remember off the top of my head but it had to do with sse extentions I think? I'll check, hang on... edit: okay so I don't have the source on me but if you remove the "-msse2" from CXXFLAGS in buildfile.unix you should be good. ehm. maybe you can give more and detailed information? noob here Try the following: sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev git clone https://github.com/vericoin/rpicd vericoin qmake make thank you, will do and report!!! PROBLEM Cloning into 'rpi'... Username for https://github.com: What am I supposed to do? i think the vericoin/rpi link is dead?
|
|
|
|
pnosker
|
|
September 08, 2014, 10:07:38 PM |
|
anyone ever read a simple instruction on how to run a vericoin wallet on a raspberry pi?
my blackcoin raspi wallet is running flawlessly and i'm sure that the vericoin community can come up with an instruction too
thanks in advance!
Yeah, that would be great. Also looking for a Raspberry Pi Wallet. I tried to compile it for ARM some time ago, but wasnt successful A raspberry Pi wallet would be perfect for staking .... There's certain flags you have to set when you compile it. Can't remember off the top of my head but it had to do with sse extentions I think? I'll check, hang on... edit: okay so I don't have the source on me but if you remove the "-msse2" from CXXFLAGS in buildfile.unix you should be good. ehm. maybe you can give more and detailed information? noob here Try the following: sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev git clone https://github.com/vericoin/rpicd vericoin qmake make thank you, will do and report!!! PROBLEM Cloning into 'rpi'... Username for https://github.com: What am I supposed to do? i think the vericoin/rpi link is dead? Sorry, it should have been: https://github.com/vericoin/master/tree/rpi
|
Support the VeriFund Endowment. VRC: VFEndownxxnHea9mv59kZx8c7TysGbndYx
|
|
|
|
yetiripper
Full Member
Offline
Activity: 250
Merit: 100
The Future Of Work
|
|
September 08, 2014, 10:23:22 PM |
|
That last part (/info/refs) shouldn't be in the address.
|
|
|
|
|
luisb
Newbie
Offline
Activity: 43
Merit: 0
|
|
September 08, 2014, 10:45:59 PM |
|
@ScottAllyn I´ve sent you a PM have you seen it? thx
|
|
|
|
wetwipe
Member
Offline
Activity: 70
Merit: 10
|
|
September 08, 2014, 11:08:11 PM |
|
im no expert but try clearing cache and stuff?. then restart pc. sometimes that works.?.
|
VGWNxRiC1s3jMi7S6Nzuv2PpDKT9PmqiQy <----- VRC treatment fund for the clinically insane. -----> (Barabbass-AltcoinUK).
|
|
|
sluppy
Legendary
Offline
Activity: 2020
Merit: 1041
|
|
September 08, 2014, 11:09:44 PM |
|
im no expert but try clearing cache and stuff?. then restart pc. sometimes that works.?. Im getting the same error.
|
The only thing necessary for the triumph of evil is for good men to do nothing. Edmund Burke -- May the forces of evil become confused on the way to your house.George Carlin We pay for life with death , so everything in between should be free. Bill Hicks -- It is during our darkest moments that we must focus to see the light. Aristotle Do not dwell in the past, do not dream of the future, concentrate the mind on the present moment. Buddha -- The only true wisdom is in knowing you know nothing. Socrates
|
|
|
souljah1h
Legendary
Offline
Activity: 1092
Merit: 1000
Hyperspace snail
|
|
September 08, 2014, 11:22:47 PM |
|
<Nacmonad> ah fuckin fire alarm at my appartment fuck * alpho2k (~stephane@LTVLPQ0403W-LP130-04-845534948.dsl.bell.ca) Quit (Client Quit) <Nacmonad> i got two cats and a laptop fffu <Nacmonad> and no pants atm * Nacmonad (4632583a@gateway/web/cgi-irc/kiwiirc.com/ip.70.50.88.58) Quit (Quit: http://www.kiwiirc.com/ - A hand crafted IRC client) Hope you are safe!!
|
_@/'
|
|
|
doc12
Legendary
Offline
Activity: 1284
Merit: 1042
|
|
September 08, 2014, 11:25:27 PM |
|
im no expert but try clearing cache and stuff?. then restart pc. sometimes that works.?. Im getting the same error. Same here...
|
|
|
|
effectsToCause (OP)
|
|
September 08, 2014, 11:54:12 PM |
|
anyone ever read a simple instruction on how to run a vericoin wallet on a raspberry pi?
my blackcoin raspi wallet is running flawlessly and i'm sure that the vericoin community can come up with an instruction too
thanks in advance!
Yeah, that would be great. Also looking for a Raspberry Pi Wallet. I tried to compile it for ARM some time ago, but wasnt successful A raspberry Pi wallet would be perfect for staking .... There's certain flags you have to set when you compile it. Can't remember off the top of my head but it had to do with sse extentions I think? I'll check, hang on... edit: okay so I don't have the source on me but if you remove the "-msse2" from CXXFLAGS in buildfile.unix you should be good. ehm. maybe you can give more and detailed information? noob here Try the following: sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev git clone https://github.com/vericoin/rpicd vericoin qmake make thank you, will do and report!!! PROBLEM Cloning into 'rpi'... Username for https://github.com: What am I supposed to do? i think the vericoin/rpi link is dead? should be git clone https://github.com/vericoin/master
|
|
|
|
|
positivehigh
Member
Offline
Activity: 99
Merit: 10
|
|
September 09, 2014, 01:22:28 AM |
|
James please say a little of your plan here so this coin will start the rise again so before the launch of the supernet the price will be attractive. thank you
|
|
|
|
|
Xosihc
|
|
September 09, 2014, 02:38:05 AM |
|
James please say a little of your plan here so this coin will start the rise again so before the launch of the supernet the price will be attractive. thank you
this +1
|
|
|
|
ELMER_FUD
Member
Offline
Activity: 98
Merit: 10
|
|
September 09, 2014, 05:33:06 AM Last edit: September 09, 2014, 07:08:52 AM by ELMER_FUD |
|
God bless the ruler of the 500k coins wish I was smart enough to come up with a gimmick to get that many coins.
The 500K+ coins belong to the community. James donated them back so there's no gimmick there. So if you gave X amount and in two weeks need them because of a financial emergency can you get them back?? I wouldn't want them back even if I had the mafia threatening to break my legs over paying them. Those coins were a gift to James for his becoming involved here. I thought that VRC was a diamond in the rough before he came along but now I think it even more so that he's involved. Like anything that's worthwhile though, it'll take time. I knew that from the beginning and should have kept that in mind when I was buying this weekend. But what I'm saying is that them coins are gone for promise and hope. If something real happens you don't have them coins no more. The coins weren't donated, they were committed to an escrow account that will pay 10,000 satoshi per VRC sent, once the VRC price reaches 50k satoshi. They are still in that escrow (managed by Doug), and won't be touched until the community determines the fate of the 80% (non-escrowed) coins. Thanks for clarifying that, Patrick. I must have misunderstood Doug's post.
|
VRC Tip Jar: VERiTAS2MPYM94kTwtni3GvnwdmWXqJsQf
|
|
|
witalijusss
Member
Offline
Activity: 109
Merit: 10
|
|
September 09, 2014, 07:06:48 AM |
|
God bless the ruler of the 500k coins wish I was smart enough to come up with a gimmick to get that many coins.
The 500K+ coins belong to the community. James donated them back so there's no gimmick there. So if you gave X amount and in two weeks need them because of a financial emergency can you get them back?? I wouldn't want them back even if I had the mafia threatening to break my legs over paying them. Those coins were a gift to James for his becoming involved here. I thought that VRC was a diamond in the rough before he came along but now I think it even more so that he's involved. Like anything that's worthwhile though, it'll take time. I knew that from the beginning and should have kept that in mind when I was buying this weekend. But what I'm saying is that them coins are gone for promise and hope. If something real happens you don't have them coins no more. The coins weren't donated, they were committed to an escrow account that will pay 10,000 satoshi per VRC sent, once the VRC price reaches 50k satoshi. They are still in that escrow (managed by Doug), and won't be touched until the community determines the fate of the 80% (non-escrowed) coins. Thanks for clarifying that, Patrick. I must have misunderstood Doug's post. I think this coin have a future and now the price is really low: https://www.bittrex.com/Market/Index?MarketName=BTC-GML
|
|
|
|
|