maxmad_x
Sr. Member
 Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
 |
January 05, 2017, 02:25:52 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR..  More XMR at the rate of ETH profits ) |
|
|
|
|
spyder09
Member
Offline
Activity: 60
Merit: 10
|
|
January 05, 2017, 03:10:30 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR.. More XMR at the rate of ETH profits ) How do you auto convert your eth coins to xmr? |
|
|
|
|
|
aaronsace
|
|
January 05, 2017, 03:20:05 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR.. More XMR at the rate of ETH profits ) How do you auto convert your eth coins to xmr? Select your auto exchange coin on miningpoolhub.com. Anything you mine from then on will be converted. (Anything!) All you need to do then is mine the most profitable algorithm: https://github.com/aaronsace/MultiPoolMiner/releases |
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
January 05, 2017, 06:16:49 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR.. More XMR at the rate of ETH profits ) How do you auto convert your eth coins to xmr? Go to miningpoolhub. Mine there; on the left side you can select autoexchange. Set the coin to get all your mining back to monero (from dropdown). Thats it . It will take some time to start getting monero (about 6-8 hrs.) you will initially see ETH accumulating.. that will be automatically sent to exchanged and changed for monero. Then you will see onero in your wallet |
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
January 05, 2017, 06:19:13 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR.. More XMR at the rate of ETH profits ) How do you auto convert your eth coins to xmr? Select your auto exchange coin on miningpoolhub.com. Anything you mine from then on will be converted. (Anything!) All you need to do then is mine the most profitable algorithm: https://github.com/aaronsace/MultiPoolMiner/releasesare you working with miningpoolhub? If not you should tag along with those developers. Your software might turn into a great addition to complete their flexible model |
|
|
|
|
blue1984
Member
Offline
Activity: 75
Merit: 10
|
|
January 05, 2017, 08:14:22 AM |
|
Hello,
i use 7x 470 (4600 H/s ) with CryptoNote GPU Miner v9.7 for 9,2 hours - and i get 0,146 on Supernova ( with SSL).
earings for 24 hours 0,146 /9.2 * 24 = 0,380 XMR
the Calculator profit after 24 Hours...-> 0.5068 XMR
What is the Problem? wrong Pool?
lg Martin
|
|
|
|
|
|
doktor83
|
|
January 05, 2017, 08:15:21 AM |
|
 And then i got banned from dwarfpool. |
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 05, 2017, 08:31:33 AM |
|
And then i got banned from dwarfpool. well it says it all, you aren't authenticated, that's why your share get rejected and got banned. What cmdline are you using to connect to pool ? have you checked your user name, if you mine directly to exchange you checked you were using wallet.paymentId as user ? |
|
|
|
|
Squall10
Newbie
Offline
Activity: 47
Merit: 0
|
|
January 05, 2017, 08:59:05 AM |
|
I got same problem but before that, I had many "lowdiffucultyshare" error and then "unauthenticated". In 9.6, the miner disconnects then reconnects when I got ""lowdiffucultyshare" error. In 9.7, it don't disconnect then I keep having the "unauthenticated" error. |
|
|
|
|
|
kirilvvbg
|
|
January 05, 2017, 09:14:09 AM |
|
Claymore, I think, in the next update you should optimize and correct the "-a" function. Now it is: -a Select algorithm:
"-a 0" (default) means autoselection.
"-a 1" fastest mining mode for 290/290x and 270/270x cards.
"-a 2" low power consumption mode for 290/290x cards. A bit less speed (1%) but less power consumption (10-15%).
"-a 3" fastest mining for old cards (6xxx and 5xxx).
"-a 4" fastest mining for recent cards (280x, 270/270x etc). In "-a 1" we have 270/270x, but in "-a 4" too?! And the description in just a miner issue. I have my RX470/4 recognised as RX470 from the miner. BUT - it auto selects mode "-a 1". And in order to prevent the pool from constantly saying "lowdifficultyshare" I had to underclock (!!!) them. When mode is changed to "-a 4" - just occasional "red" messages about low diff. On the other hand - another rig (This time with RX470/8) also autodetected on "-a 1" mode, but no problems with lowdiffshare. And no difference if -a 1 or -a 4...... So, I think it would be good if this auto mode selection could be optimised. |
|
|
|
|
xuanmichael
Newbie
Offline
Activity: 17
Merit: 0
|
|
January 05, 2017, 09:24:32 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR your setting ? core/mem: window: catalyst: i using rx480 only have 635H/s core/mem: 1288/8000 window: win 7 x64 catalyst: 16.12.2 |
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
January 05, 2017, 09:28:23 AM |
|
after setting up v9.7, in ethman... the version number column shows "9.7 - CN"
what does CN mean?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
nexitorned
Member
Offline
Activity: 116
Merit: 10
|
|
January 05, 2017, 09:32:53 AM |
|
Whas is current hashrate for RX 470 cards and R9 380 cards ? Is it more profitable to mine XMR or ZEC with them right now. Price of both coins is currently high at the moment.
Hash on RX 480 - 730H/s ETH/ETC is more profitable than XMR lol. I am mining ETH on miningpoolhub and keep autoconvert coins to XMR.. More XMR at the rate of ETH profits ) ETH Worth? I'm mining ZEC with GTX 1060 and get like 0.04 per Month. I will buy a rig when i reach 0.2 BTC for at least RX 470 or something like this. Zec at this moment is really HIGH. |
|
|
|
|
Bakery
Newbie
Offline
Activity: 55
Merit: 0
|
|
January 05, 2017, 09:55:00 AM
Last edit: January 05, 2017, 10:06:23 AM by Bakery |
|
Somehow the miner is still unstable with my rx470 4gb nitro cards.
and some error "cannot convert blob data"
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 05, 2017, 10:07:19 AM |
|
after setting up v9.7, in ethman... the version number column shows "9.7 - CN"
what does CN mean?
CN = CryptoNight. ZEC miner will report "ZEC" and so on, this way you can easily see what miners you use (if you use different miners). Then I will update EthMan so it will check what miner is used and will apply appropriate scale automatically - KH/s for CN and ZEC, MH/s for ETH. |
|
|
|
persiansstuff
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 05, 2017, 10:08:14 AM |
|
well it says it all, you aren't authenticated, that's why your share get rejected and got banned. What cmdline are you using to connect to pool ? have you checked your user name, if you mine directly to exchange you checked you were using wallet.paymentId as user ? SAME here.buggy version for me Switching back to 9.6 |
|
|
|
|
|
aaronsace
|
|
January 05, 2017, 10:21:36 AM |
|
after setting up v9.7, in ethman... the version number column shows "9.7 - CN"
what does CN mean?
CN = CryptoNight. ZEC miner will report "ZEC" and so on, this way you can easily see what miners you use (if you use different miners). Then I will update EthMan so it will check what miner is used and will apply appropriate scale automatically - KH/s for CN and ZEC, MH/s for ETH. Ha, I missed that pattern on the version number.  Just searched for the term "ETH:" instead when using the API. Will definitely use that on the next release of MultiPoolMiner for MiningPoolHub.com. https://github.com/aaronsace/MultiPoolMiner/releases |
|
|
|
|
doktor83
|
|
January 05, 2017, 10:42:36 AM |
|
And then i got banned from dwarfpool. I got same problem but before that, I had many "lowdiffucultyshare" error and then "unauthenticated". In 9.6, the miner disconnects then reconnects when I got ""lowdiffucultyshare" error. In 9.7, it don't disconnect then I keep having the "unauthenticated" error. yes this is what exactly happened. Was mining fine for hours, then i logged in to the miner and saw this. This was the case on few machines, but not on all ?!! |
|
|
|
|
deadsix
|
|
January 05, 2017, 10:52:49 AM |
|
after setting up v9.7, in ethman... the version number column shows "9.7 - CN"
what does CN mean?
CN = CryptoNight. ZEC miner will report "ZEC" and so on, this way you can easily see what miners you use (if you use different miners). Then I will update EthMan so it will check what miner is used and will apply appropriate scale automatically - KH/s for CN and ZEC, MH/s for ETH. Ha, I missed that pattern on the version number. Just searched for the term "ETH:" instead when using the API. Will definitely use that on the next release of MultiPoolMiner for MiningPoolHub.com. https://github.com/aaronsace/MultiPoolMiner/releasesThis is a brilliant little tool, I'm loving it so far. Great job man, i'm surprised I don't see a dedicated thread for this. |
|
|
|
|
aaronsace
|
|
January 05, 2017, 11:07:02 AM |
|
This is a brilliant little tool, I'm loving it so far. Great job man, i'm surprised I don't see a dedicated thread for this.
Thank you; I'm pleased you like it! Hadn't thought about it but, yeah, maybe I should start a thread for it. If you have any suggestions or find any bugs: https://github.com/aaronsace/MultiPoolMiner/issues |
|
|
|
|
