Claymore's CryptoNote AMD GPU Miner v11.3

[fuzion1]

What msi afterburner settings are good for XMR mining on RX480, RX470, and 390?

[Prelude]

Anyone know if claymore's miner can be used to solo mine?

[kirilvvbg]

Same with the pool, I am mining in since 9.7 release:

Miningpoolhub is working perfectly for those looking for a proper pool, and the pool op is great.

9.7 is perfectly stable across my 20+ rigs. If you're having issues with it, it's either your pool crapping out or your rigs aren't properly configured.

P.S. Dwarf, Minergate, Crypto-pool.fr - all tested and they suck...
P.S.2 No need to create workers in the pool - they're auto detected once you start mining.

[ffthomas]

Same with the pool, I am mining in since 9.7 release:

Miningpoolhub is working perfectly for those looking for a proper pool, and the pool op is great.

9.7 is perfectly stable across my 20+ rigs. If you're having issues with it, it's either your pool crapping out or your rigs aren't properly configured.

P.S. Dwarf, Minergate, Crypto-pool.fr - all tested and they suck...
P.S.2 No need to create workers in the pool - they're auto detected once you start mining.

Thanks, I was looking for a good pool and I didn't try Miningpoolhub. Now it is time to give a chance for that pool.

I red that Suprnova is working properly too.

[krjalone]

Same with the pool, I am mining in since 9.7 release:

Miningpoolhub is working perfectly for those looking for a proper pool, and the pool op is great.

9.7 is perfectly stable across my 20+ rigs. If you're having issues with it, it's either your pool crapping out or your rigs aren't properly configured.

P.S. Dwarf, Minergate, Crypto-pool.fr - all tested and they suck...
P.S.2 No need to create workers in the pool - they're auto detected once you start mining.

Thanks    I had also problems with minergate and dwarf but Miningpoolhub is working excellent.

[Bakery]

https://xmr.suprnova.cc/ is working perfectly for those looking for a proper pool, and the pool op is great.

9.7 is perfectly stable across my 20+ rigs. If you're having issues with it, it's either your pool crapping out or your rigs aren't properly configured.

Do you have any rx 470 cards running?
What driver version and windows you have?
Somehow for my rx 470 4gb nitro windows crashes after a few hours.

[krjalone]

https://xmr.suprnova.cc/ is working perfectly for those looking for a proper pool, and the pool op is great.

9.7 is perfectly stable across my 20+ rigs. If you're having issues with it, it's either your pool crapping out or your rigs aren't properly configured.

Do you have any rx 470 cards running?
What driver version and windows you have?
Somehow for my rx 470 4gb nitro windows crashes after a few hours.

Win 7 and 16.10.3 driver version is working good no problems with rx 470 asus cards. Have you clocked your cards or are they stock?

[oktar]

Claymore, any idea why it always hangs after 0.5 - 3h of mining ? Using latest Linux version.

Code:

01/06/17-01:49:28 - New job received from xmr-eu.dwarfpool.com:8050
Speed: 3003 h/s, TotalHashes: 14948K, DevHashes: 373K Mining time: 01:22
01/06/17-01:49:30 - SHARE FOUND (target 10000) - (GPU 4 of 6)
01/06/17-01:49:30 - SHARE FOUND (target 10000) - (GPU 1 of 6)
GPU 0 t=78C fan=31%; GPU 1 t=78C fan=30%; GPU 2 t=78C fan=31%; GPU 3 t=78C fan=32%; GPU 4 t=78C fan=32%; GPU 5 t=78C fan=25%;
01/06/17-01:49:38 - SHARE FOUND (target 10000) - (GPU 4 of 6)
01/06/17-00:49:41 - SHARE FOUND (target 10000) - (GPU 0 of 6)
Unhandled signal in divisionErrorHandler()

[scavern]

Hopefully Claymore will release Linux version 9.7, but I wouldn't hold my breath.

Claymore, any idea why it always hangs after 0.5 - 3h of mining ? Using latest Linux version.

Code:

01/06/17-01:49:28 - New job received from xmr-eu.dwarfpool.com:8050
Speed: 3003 h/s, TotalHashes: 14948K, DevHashes: 373K Mining time: 01:22
01/06/17-01:49:30 - SHARE FOUND (target 10000) - (GPU 4 of 6)
01/06/17-01:49:30 - SHARE FOUND (target 10000) - (GPU 1 of 6)
GPU 0 t=78C fan=31%; GPU 1 t=78C fan=30%; GPU 2 t=78C fan=31%; GPU 3 t=78C fan=32%; GPU 4 t=78C fan=32%; GPU 5 t=78C fan=25%;
01/06/17-01:49:38 - SHARE FOUND (target 10000) - (GPU 4 of 6)
01/06/17-00:49:41 - SHARE FOUND (target 10000) - (GPU 0 of 6)
Unhandled signal in divisionErrorHandler()

[joaocha]

I recomend to everyone to Use -a 2

Less power consuption/heat and same hashrate

[blue1984]

also never i can no earn as the calculator tell
i earn the half always
so is not profit

i return to zec eth

same Problem


i use 7x 470 (4600 H/s ) with CryptoNote GPU Miner v9.7 for 9,2 hours - and i get 0,146 on Supernova ( with SSL).

earings for 24 hours 0,146 /9.2 * 24 = 0,380 XMR

the Calculator profit after 24 Hours...-> 0.5068 XMR

Same result also on Minersgate


What is the Problem? wrong Pool?


lg Martin

[delle54]

Read the instructions on dwarfpool!!! Port 8050 works fine for me.

[Hurtman]

also never i can no earn as the calculator tell
i earn the half always
so is not profit

i return to zec eth

same Problem


i use 7x 470 (4600 H/s ) with CryptoNote GPU Miner v9.7 for 9,2 hours - and i get 0,146 on Supernova ( with SSL).

earings for 24 hours 0,146 /9.2 * 24 = 0,380 XMR

the Calculator profit after 24 Hours...-> 0.5068 XMR

Same result also on Minersgate


What is the Problem? wrong Pool?


lg Martin

Dev Fee + % Pool

[abg00]

will be fixed in next update.

in programm window show only summary hashrate. each card hashrate show only in remote manager.
also plz add -logfile options

[Ursul0]

will be fixed in next update.

in programm window show only summary hashrate. each card hashrate show only in remote manager.
also plz add -logfile options

press "m" as in 9.6 to see individual gpu stats

[christiano88]

Claymore, can you please add a counter for "lowdifficultyshare" error?
It is hard to check by scrolling, too much text after a while, so just like we have invalid shares count, it could be very useful to have lowdifficultyshar error count.

Thanks!

[king_pin]

This is what I got today when scanning my PC

Malware name: Trojan.Generic.19686815
Malware file path: C:\Users\king_pin\Desktop\Claymore CryptoNote GPU Miner v9.6 Beta - POOL\NsGpuCNMiner.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

Malware name: Adware.GenericKD.4077255
Malware file path: C:\Users\king_pin\Desktop\Claymore's ZCash AMD GPU Miner v9.2 Beta\ZecMiner64.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

[doktor83]

This is what I got today when scanning my PC

Malware name: Trojan.Generic.19686815
Malware file path: C:\Users\king_pin\Desktop\Claymore CryptoNote GPU Miner v9.6 Beta - POOL\NsGpuCNMiner.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

Malware name: Adware.GenericKD.4077255
Malware file path: C:\Users\king_pin\Desktop\Claymore's ZCash AMD GPU Miner v9.2 Beta\ZecMiner64.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

i hope you are not surprised ?

[markus124]

Read the instructions on dwarfpool!!! Port 8050 works fine for me.

Can you share ur batfile configuration? I'm still having the "lowshare" problem from time to time, even when i try different config or ports.

[not.you]

This is what I got today when scanning my PC

Malware name: Trojan.Generic.19686815
Malware file path: C:\Users\king_pin\Desktop\Claymore CryptoNote GPU Miner v9.6 Beta - POOL\NsGpuCNMiner.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

Malware name: Adware.GenericKD.4077255
Malware file path: C:\Users\king_pin\Desktop\Claymore's ZCash AMD GPU Miner v9.2 Beta\ZecMiner64.exe
Detection time: 06-Jan-2017 12:45:03 UTC
Additional information / action: Moved to quarantine

What really bugs me about those is that they classify them as trojans or adware.  That's straight up false and frankly dishonest on the part of the virus scanner manufacturer.  It's completely fair to call it "potentially unwanted" but to call it something it isn't makes the virus scanner manufacturer look stupid and sloppy.  I use sophos and they do the same thing with some miner executables, calling them trojans, it's just stupid.  They should have more concern for being accurate about what these programs actually do.  Just because some botnet uses an executable doesn't automatically make that executable malware and it certainly doesn't make a mining executable a "trojan".