MisO69
Legendary
Offline
Activity: 1946
Merit: 1005
My mule don't like people laughing
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 06:24:06 PM |
|
Tested on one of my 280x rigs 6 GPU, Windows 8.1, Celeron processor.
Installed the vcredis_x86 2013.
CPU pinned at 100%. With 1 thread or two, same results. I'ma try tweaking some of the other parameters such as intensity.
|
|
|
|
ncunt
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 112
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 06:34:32 PM |
|
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 06:43:50 PM |
|
Tested on one of my 280x rigs 6 GPU, Windows 8.1, Celeron processor.
Installed the vcredis_x86 2013.
CPU pinned at 100%. With 1 thread or two, same results. I'ma try tweaking some of the other parameters such as intensity.
which config file are you tweaking the one in the same directory as the exe or the one in Release/Ressource/Config (because it is the second one you need to tweak. the first one is a something I forgot to clean...) May-be I should release a new version without that one for those who really don't want to read what I wrote. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
hero18688
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 11:37:48 PM |
|
Thanks , Ill check out EDIT: Stabilized it at 145 MH/s with 5x280X Vapor-X, but did not find any block. I have a rig of Nvidia which mining with 110MH/s and hits blocks ...
It should work, in principle, I will check again (to make sure I didn't mess with before releasing) if the nonce doesn't skip any value... What's the conf of 750ti for your previous released miner,I got only around 19mh/s for each 750ti. I was getting 28mh/s with a mild oc. Did you compile it yourself or is this a binaries you found here ? If you compile it yourself, make sure you use compute_50 (however the driver should take care of that...) No,I just using the windows build I found here.I have oc to 1350mhz.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 12:19:25 AM |
|
Thanks , Ill check out EDIT: Stabilized it at 145 MH/s with 5x280X Vapor-X, but did not find any block. I have a rig of Nvidia which mining with 110MH/s and hits blocks ...
It should work, in principle, I will check again (to make sure I didn't mess with before releasing) if the nonce doesn't skip any value... What's the conf of 750ti for your previous released miner,I got only around 19mh/s for each 750ti. I was getting 28mh/s with a mild oc. Did you compile it yourself or is this a binaries you found here ? If you compile it yourself, make sure you use compute_50 (however the driver should take care of that...) No,I just using the windows build I found here.I have oc to 1350mhz. I will have an update tomorrow together with a new keccak kernel compatible with compute 5_2, will see if it's boost the performance on 50 too... Also the possibility to chose cards. and also a kernel working for compute_30 (but don't expect miracle at that level the performance are, there is no other word, terrible...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
hero18688
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:08:42 AM |
|
Thanks , Ill check out EDIT: Stabilized it at 145 MH/s with 5x280X Vapor-X, but did not find any block. I have a rig of Nvidia which mining with 110MH/s and hits blocks ...
It should work, in principle, I will check again (to make sure I didn't mess with before releasing) if the nonce doesn't skip any value... What's the conf of 750ti for your previous released miner,I got only around 19mh/s for each 750ti. I was getting 28mh/s with a mild oc. Did you compile it yourself or is this a binaries you found here ? If you compile it yourself, make sure you use compute_50 (however the driver should take care of that...) No,I just using the windows build I found here.I have oc to 1350mhz. I will have an update tomorrow together with a new keccak kernel compatible with compute 5_2, will see if it's boost the performance on 50 too... Also the possibility to chose cards. and also a kernel working for compute_30 (but don't expect miracle at that level the performance are, there is no other word, terrible...) Is this the total hashrate of my 4*750ti or just for each one? ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs11.postimg.org%2Fynnzrazqn%2F20141031115151.jpg&t=665&c=XRQgLeH9zYGJ8g)
|
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:26:39 AM |
|
Its the total hashrate of all 4 cards.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 11:36:08 AM |
|
Its the total hashrate of all 4 cards.
yes and the very big number is the bug... (the problem with those c++ class is that at some point you always end up a non initialized variable... even though, I reset it all the time...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
hoze
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 11:48:53 AM |
|
Its the total hashrate of all 4 cards.
yes and the very big number is the bug... (the problem with those c++ class is that at some point you always end up a non initialized variable... even though, I reset it all the time...) I have 6 x 750ti and only 4 GPU working. Do U know maybe what is wrong? It's interesting that GPU 1,2,3 and 6 work and GPU 4,5 not ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Total hashrate is ~68Mhs
|
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 12:02:41 PM |
|
Its the total hashrate of all 4 cards.
yes and the very big number is the bug... (the problem with those c++ class is that at some point you always end up a non initialized variable... even though, I reset it all the time...) I have 6 x 750ti and only 4 GPU working. Do U know maybe what is wrong? It's interesting that GPU 1,2,3 and 6 work and GPU 4,5 not ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Total hashrate is ~68Mhs give as more info: miner version , command line , driver ver..
|
|
|
|
hoze
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 12:17:58 PM |
|
Its the total hashrate of all 4 cards.
yes and the very big number is the bug... (the problem with those c++ class is that at some point you always end up a non initialized variable... even though, I reset it all the time...) I have 6 x 750ti and only 4 GPU working. Do U know maybe what is wrong? It's interesting that GPU 1,2,3 and 6 work and GPU 4,5 not ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . Total hashrate is ~68Mhs give as more info: miner version , command line , driver ver.. windows 8.1 , skminer v0.1, skminer.exe 127.0.0.1 9325 6 , driver 344.48
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 01:26:21 PM Last edit: October 31, 2014, 02:15:46 PM by djm34 |
|
reviewing a bit the numbers, my 750ti is doing 19.5MH/s 22.5MH/s and not 28MH/s (not sure where I got these actually...). This number is compatible with kernel time measurement (266ms 231ms for 5.24M threads) and makes more sense compared to the 780ti (41MH/s 43MH/s) or the 980 (53MH/s 63MH/s)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
MisO69
Legendary
Offline
Activity: 1946
Merit: 1005
My mule don't like people laughing
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 01:52:40 PM |
|
Tested on one of my 280x rigs 6 GPU, Windows 8.1, Celeron processor.
Installed the vcredis_x86 2013.
CPU pinned at 100%. With 1 thread or two, same results. I'ma try tweaking some of the other parameters such as intensity.
which config file are you tweaking the one in the same directory as the exe or the one in Release/Ressource/Config (because it is the second one you need to tweak. the first one is a something I forgot to clean...) May-be I should release a new version without that one for those who really don't want to read what I wrote. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Damn, thats what I get for being lazy. I'll try again. Just assumed it was the one in the same folder as the miner.exe
|
|
|
|
MisO69
Legendary
Offline
Activity: 1946
Merit: 1005
My mule don't like people laughing
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 02:36:46 PM |
|
Can't get miner to work no matter how low I go on the settings. It does identify the cards when the miner starts up but no usage on the actual GPUs. Also the CPU is still pinned at 99% usage. I am using the 13.1 drivers so maybe that is the problem?
280x 6 GPUs on windows 8.1 using the microsoft drivers for the GPUs.
platform name Advanced Micro Devices, Inc. index 0 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 ADL Overdrive 5 Was Found! ADL Overdrive 6 Was Found! ADL index 0, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 1, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 2, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 3, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 4, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 5, id 15115712 - BIOS partno.: 113-2104XTLAFR-V44, version: 015.039.00 0.001, date: 2013/09/02 23:08 vecgpudata size 6
********* Coinshield sk-1024 miner for amd GPUs by djm34 ******* ** original design by bitslapper 2014
Copyright 2014 djm34
donation address CSD: 2S2pCpRXyb8Lpre52U3Xjq2MguSdaea5YGjVTsJqgZ BfL2S24ag
Connected to 127.0.0.1:9325... [MASTER] Coinshield Network | New Block 35040 [METERS] 0 Hashes | 0.000000 KHash/s | Height = 35040 [METERS] 0 Hashes | 0.000000 KHash/s | Height = 35040
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 02:45:08 PM |
|
Can't get miner to work no matter how low I go on the settings. It does identify the cards when the miner starts up but no usage on the actual GPUs. Also the CPU is still pinned at 99% usage. I am using the 13.1 drivers so maybe that is the problem?
280x 6 GPUs on windows 8.1 using the microsoft drivers for the GPUs.
platform name Advanced Micro Devices, Inc. index 0 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 threadconcurrency 600 ADL Overdrive 5 Was Found! ADL Overdrive 6 Was Found! ADL index 0, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 1, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 2, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 3, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 4, id 12388992 - BIOS partno.: 113-2104XTLAFR-V45, version: 015.040.00 0.001, date: 2013/10/17 06:22 ADL index 5, id 15115712 - BIOS partno.: 113-2104XTLAFR-V44, version: 015.039.00 0.001, date: 2013/09/02 23:08 vecgpudata size 6
********* Coinshield sk-1024 miner for amd GPUs by djm34 ******* ** original design by bitslapper 2014
Copyright 2014 djm34
donation address CSD: 2S2pCpRXyb8Lpre52U3Xjq2MguSdaea5YGjVTsJqgZ BfL2S24ag
Connected to 127.0.0.1:9325... [MASTER] Coinshield Network | New Block 35040 [METERS] 0 Hashes | 0.000000 KHash/s | Height = 35040 [METERS] 0 Hashes | 0.000000 KHash/s | Height = 35040
probably the driver (honestly I don't know for sure), and how many core has your cpu ? I don't think it can support more card than there are cpu thread
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:08:48 PM |
|
new sources and binaries for nvidia miner: http://ge.tt/4dUHeF32/v/0?cmain change: * support added for compute_30 (the performance are bad... but it works... not enough register for skein 1024 leading to large spill store * kernel working now with compute 5_2 * optimization of skein for compute >= 3_5 gtx750: 22.5MH/s gtx780ti: 43MH/s gtx 980: 63MH/s * possibility to select the card to be used together with new format for IP:PORT selection example Release/skminer 127.0.0.1:9325 gtx980#1,gtx980#2,gtxWhatever (in the example, the program will run on two gtx980 and ignore the gtxWhatever as it won't find it on your computer (so make sure you put names of card which exist)... alternatively 980#1,980#2 will also work (as in ccminer). If no second argument is given, it will use every card found on the system. There is may-be a limitation, as I think, the number of card should be smaller or equal to the number of cpu core/thread (need to be verified though... and I don't have enough pci port for that...) * new display format, I used supercomputing one. * added compilation for linux (it is again supercomputing one...) please let me know if it works. current hashrate on my system with this version: 193MH/s (2 gtx980, 1 gtx750 and 1 gtx780ti), cpu usage 26% (which is high compared to ccminer)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:25:29 PM |
|
new sources and binaries for nvidia miner: http://ge.tt/4dUHeF32/v/0?cmain change: * support added for compute_30 (the performance are bad... but it works... not enough register for skein 1024 leading to large spill store * kernel working now with compute 5_2 * optimization of skein for compute >= 3_5 gtx750: 22.5MH/s gtx780ti: 43MH/s gtx 980: 63MH/s * possibility to select the card to be used together with new format for IP:PORT selection example Release/skminer 127.0.0.1:9325 gtx980#1,gtx980#2,gtxWhatever (in the example, the program will run on two gtx980 and ignore the gtxWhatever as it won't find it on your computer (so make sure you put names of card which exist)... alternatively 980#1,980#2 will also work (as in ccminer). If no second argument is given, it will use every card found on the system. There is may-be a limitation, as I think, the number of card should be smaller or equal to the number of cpu core/thread (need to be verified though... and I don't have enough pci port for that...) * new display format, I used supercomputing one. * added compilation for linux (it is again supercomputing one...) please let me know if it works. current hashrate on my system with this version: 193MH/s (2 gtx980, 1 gtx750 and 1 gtx780ti), cpu usage 26% (which is high compared to ccminer) hi djm34, after symlinking every hash/Keccak*.c with hash/Keccak*.cpp, i get this error: g++ -DHAVE_CONFIG_H -I. -msse2 -fopenmp -fno-strict-aliasing -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -g -O2 -MT hash/skminer-Connection.o -MD -MP -MF hash/.deps/skminer-Connection.Tpo -c -o hash/skminer-Connection.o `test -f 'hash/Connection.cpp' || echo './'`hash/Connection.cpp In file included from hash/DDOS_Filter.h:5:0, from hash/Connection.cpp:2: hash/DDOS_Score.h:24:33: error: ‘>>’ should be ‘> >’ within a nested template argument list std::vector<std::pair<bool,int>> SCORE; ^ hash/DDOS_Score.h:45:39: error: ‘>>’ should be ‘> >’ within a nested template argument list const std::vector<std::pair<bool,int>> GetScores() const { return this->SCORE; }
thank you
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:33:36 PM |
|
new sources and binaries for nvidia miner: http://ge.tt/4dUHeF32/v/0?cmain change: * support added for compute_30 (the performance are bad... but it works... not enough register for skein 1024 leading to large spill store * kernel working now with compute 5_2 * optimization of skein for compute >= 3_5 gtx750: 22.5MH/s gtx780ti: 43MH/s gtx 980: 63MH/s * possibility to select the card to be used together with new format for IP:PORT selection example Release/skminer 127.0.0.1:9325 gtx980#1,gtx980#2,gtxWhatever (in the example, the program will run on two gtx980 and ignore the gtxWhatever as it won't find it on your computer (so make sure you put names of card which exist)... alternatively 980#1,980#2 will also work (as in ccminer). If no second argument is given, it will use every card found on the system. There is may-be a limitation, as I think, the number of card should be smaller or equal to the number of cpu core/thread (need to be verified though... and I don't have enough pci port for that...) * new display format, I used supercomputing one. * added compilation for linux (it is again supercomputing one...) please let me know if it works. current hashrate on my system with this version: 193MH/s (2 gtx980, 1 gtx750 and 1 gtx780ti), cpu usage 26% (which is high compared to ccminer) hi djm34, after symlinking every hash/Keccak*.c with hash/Keccak*.cpp, i get this error: g++ -DHAVE_CONFIG_H -I. -msse2 -fopenmp -fno-strict-aliasing -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -g -O2 -MT hash/skminer-Connection.o -MD -MP -MF hash/.deps/skminer-Connection.Tpo -c -o hash/skminer-Connection.o `test -f 'hash/Connection.cpp' || echo './'`hash/Connection.cpp In file included from hash/DDOS_Filter.h:5:0, from hash/Connection.cpp:2: hash/DDOS_Score.h:24:33: error: ‘>>’ should be ‘> >’ within a nested template argument list std::vector<std::pair<bool,int>> SCORE; ^ hash/DDOS_Score.h:45:39: error: ‘>>’ should be ‘> >’ within a nested template argument list const std::vector<std::pair<bool,int>> GetScores() const { return this->SCORE; }
thank you well just do as the compiler says: replace >> by > > (kinda picky linux compiler ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ) line 33 and 39 of DDOS_SCore (I must admit I forgot to check if anything had been edited at that level... I'll need to instal some linux distro on VM to compile
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:38:45 PM |
|
new sources and binaries for nvidia miner: http://ge.tt/4dUHeF32/v/0?cmain change: * support added for compute_30 (the performance are bad... but it works... not enough register for skein 1024 leading to large spill store * kernel working now with compute 5_2 * optimization of skein for compute >= 3_5 gtx750: 22.5MH/s gtx780ti: 43MH/s gtx 980: 63MH/s * possibility to select the card to be used together with new format for IP:PORT selection example Release/skminer 127.0.0.1:9325 gtx980#1,gtx980#2,gtxWhatever (in the example, the program will run on two gtx980 and ignore the gtxWhatever as it won't find it on your computer (so make sure you put names of card which exist)... alternatively 980#1,980#2 will also work (as in ccminer). If no second argument is given, it will use every card found on the system. There is may-be a limitation, as I think, the number of card should be smaller or equal to the number of cpu core/thread (need to be verified though... and I don't have enough pci port for that...) * new display format, I used supercomputing one. * added compilation for linux (it is again supercomputing one...) please let me know if it works. current hashrate on my system with this version: 193MH/s (2 gtx980, 1 gtx750 and 1 gtx780ti), cpu usage 26% (which is high compared to ccminer) hi djm34, after symlinking every hash/Keccak*.c with hash/Keccak*.cpp, i get this error: g++ -DHAVE_CONFIG_H -I. -msse2 -fopenmp -fno-strict-aliasing -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -g -O2 -MT hash/skminer-Connection.o -MD -MP -MF hash/.deps/skminer-Connection.Tpo -c -o hash/skminer-Connection.o `test -f 'hash/Connection.cpp' || echo './'`hash/Connection.cpp In file included from hash/DDOS_Filter.h:5:0, from hash/Connection.cpp:2: hash/DDOS_Score.h:24:33: error: ‘>>’ should be ‘> >’ within a nested template argument list std::vector<std::pair<bool,int>> SCORE; ^ hash/DDOS_Score.h:45:39: error: ‘>>’ should be ‘> >’ within a nested template argument list const std::vector<std::pair<bool,int>> GetScores() const { return this->SCORE; }
thank you well just do as the compiler says: replace >> by > > (kinda picky linux compiler ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ) line 33 and 39 of DDOS_SCore (I must admit I forgot to check if anything had been edited at that level... I'll need to instal some linux distro on VM to compile yes, it was pretty obvious, sorry... what about this? hash/Keccak-compact64.cpp: In function ‘void KeccakF1600_StatePermute(void*)’: hash/Keccak-compact64.cpp:189:11: error: invalid conversion from ‘void*’ to ‘tKeccakLane* {aka long long unsigned int*}’ [-fpermissive] state = argState; ^ Makefile:585: recipe for target 'hash/skminer-Keccak-compact64.o' failed
thank you edit: solved by adding -fpermissive to compile flags, but now i really don't know what to do: nvcc -g -O2 -I . -Xptxas "-v" -gencode=arch=compute_30,code=\"sm_30,compute_30\" --ptxas-options=-v -o Algo/sk1024.o -c Algo/sk1024.cu Algo/sk1024.cu(33): error: more than one instance of overloaded function "scanhash_sk1024" has "C" linkage
Algo/sk1024.cu(78): warning: variable "pskein" was declared but never referenced
Algo/sk1024.cu(85): warning: variable "pkeccak" was declared but never referenced
1 error detected in the compilation of "/tmp/tmpxft_000013e5_00000000-6_sk1024.cpp1.ii".
(fyi, i had also to symlink util.c to util.cpp)
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:53:23 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
|