Ok so cestballot and hoze caused me to take a look at my code an debug it for a while today...
I fixed 3 major Issues so please use this new binary!
1. GPU Settings were getting over written by the first GPU in the rig.
2. Added a warning for Cards that don't support the 64 bit instruction set, such as the HD6950.
Basically these cards aren't supported because of how the SK1024 kernel works. So that means I also added a way to disable GPU's. There's a new devices section in the config. For now you must enter all of the devices you want running in there.
For example if you have a 3 GPU rig:
"devices" : "0,1,2"
if you just did
"devices" : "0,1",
Then device 2 would be disabled.
Also ensure you have at least one other setting setup for all 3 cards such as:
"gpu-engine" : "1080,1050,950"
3. I fixed the CPU usage issue. Went from 99% on my rig down to 12%.
Here is the new Windows x64 binary:
https://www.dropbox.com/s/h2lcngoudtbuv5w/SKMiner.7z?dl=0I think your config is for one card 270x?
I have 4-270x in one rig.I edited config in resources/config like this
{
"connections" :
[
{
"url" : "127.0.0.1:9325",
"user" : "x",
"password" : "x"
}
],
"devices" : "0,1,2",
"algorithm" : "sk1024_djm",
"gpu-engine" : "1080,1050,950"
"gpu-memclock" : "1250,1250,1250",
"gpu-shaders" : "1280,1280,1280",
"gpu-threads" : "2,2,2",
"gpu-vddc" : "1100,1100,1100",
"gpu-powertune" : "0,0,0",
"intensity" : "22,22,22",
"xintensity" : "0,0,0",
"rawintensity" : "0,0,0",
"thread-concurrency" : "15232,15232,15232",
"lookup-gap" : "2,2,2",
"worksize" : "512,512,512",
"temp-target" : "75,75,75",
"temp-overheat" : "80,80,80",
"temp-cutoff" : "95,95,95",
"auto-engine" : "false",
"auto-fan" : "false",
"submit-stale" : "false",
"vectors" : "1",
}
But the miner won't start but pause.How to fix?
With default config.Only one card is mining at 11k.It's half of 750ti.