aurel57
Legendary
Offline
Activity: 1246
Merit: 1000
|
|
September 24, 2014, 04:16:07 PM |
|
Does someone know the company name and street address of Bitman ?
Why?
|
|
|
|
Moria843
Sr. Member
Offline
Activity: 442
Merit: 250
Found Lost beach - quiet now
|
|
September 24, 2014, 05:06:50 PM |
|
Need help solving S3 wireless connection issue. Have 8 undervoltaged S1s and 2 S3s. All 8 S1s and 1 S3 hooked up wireless and working fine (added pigtail and antenna to S3s). But 1 S3 will detect my wireless network when I scan from the WiFi tab and shows a great signal (95% power), but when I tell it to connect it never does and comes back showing 0% power and no IP address assigned. They're all set up the same (DHCP) but for some reason this one doesn't work on wireless (works fine with wired LAN). I've tried setting it up with a static address and same thing happens. Also tried the common things like rebooting router, rebooting miner from software and power but nothing changes. Any suggestions?
|
Hot time, summer in the city, back of my mine getting hot & gritty!!!
|
|
|
Dallski
Newbie
Offline
Activity: 54
Merit: 0
|
|
September 24, 2014, 06:31:25 PM |
|
Bitmian been offline all morning. Maybe they are updating products and prices YES
Price for Antminer S4 just posted: $1450 USD
|
|
|
|
daeminium
|
|
September 24, 2014, 07:28:16 PM |
|
Bitmian been offline all morning. Maybe they are updating products and prices YES
Price for Antminer S4 just posted: $1450 USD Never ROI
|
|
|
|
dimaze
Member
Offline
Activity: 181
Merit: 53
|
|
September 24, 2014, 07:38:57 PM |
|
Pretty disappointed with my RMA experience with Bitmain. It's been over a month since a RMA/Label was promised for my defective S3 hardware (1 chain, 2 control boards, out of 16 total S3s) and there's no response. Time to write another email, hopefully they can expedite the process.
|
|
|
|
CryptoGuy
|
|
September 24, 2014, 08:13:40 PM |
|
Bitmian been offline all morning. Maybe they are updating products and prices YES
Price for Antminer S4 just posted: $1450 USD Never ROI Ships by the end of the month though. https://bitcointalk.org/index.php?topic=784897.0
|
<Insert favorite coin here>
|
|
|
Stratobitz
Legendary
Offline
Activity: 1022
Merit: 1010
|
|
September 24, 2014, 08:59:34 PM |
|
Butterfly Labs has been Shut Down by the FTC. Closed.
Just happened. That's one less ASIC Miner Company.
Strato
And what is the point of posting this into the Antminer S3 Thread ? The point is this news will impact Bitmain and any purchasers of Bitmain as it will impact the bitcoin network in general. It's also relevant as some of us were unfortunate enough to have had dealings with BFL in the past. So you think with all the presence of the (multiple) "BFL got shut by the FTC" Threads anyone would overlook that and would not be informed without that OT posting here ??! If so, they are definitely doing the wrong thing... Certainly didn't mean to offend you OCMINER by posting about BFL getting shut down. I figured the story was relevant due to the fact that there are only a small handful of companies producing this niche hardware, and secondly, just to further connect the dots, that BFL, despite their many problems, would be considered a main competitor to BitMainTech. Thus, the point. Strato
|
|
|
|
soy
Legendary
Offline
Activity: 1428
Merit: 1013
|
|
September 24, 2014, 09:19:57 PM |
|
Butterfly Labs has been Shut Down by the FTC. Closed.
Just happened. That's one less ASIC Miner Company.
Strato
And what is the point of posting this into the Antminer S3 Thread ? The point is this news will impact Bitmain and any purchasers of Bitmain as it will impact the bitcoin network in general. It's also relevant as some of us were unfortunate enough to have had dealings with BFL in the past. So you think with all the presence of the (multiple) "BFL got shut by the FTC" Threads anyone would overlook that and would not be informed without that OT posting here ??! If so, they are definitely doing the wrong thing... Certainly didn't mean to offend you OCMINER by posting about BFL getting shut down. I figured the story was relevant due to the fact that there are only a small handful of companies producing this niche hardware, and secondly, just to further connect the dots, that BFL, despite their many problems, would be considered a main competitor to BitMainTech. Thus, the point. Strato Busy myself and only reading two Bitmain threads on bitcointalk.org. I was informed by the post. Thanks for posting. soy
|
|
|
|
Stratobitz
Legendary
Offline
Activity: 1022
Merit: 1010
|
|
September 24, 2014, 09:22:36 PM |
|
Butterfly Labs has been Shut Down by the FTC. Closed.
Just happened. That's one less ASIC Miner Company.
Strato
And what is the point of posting this into the Antminer S3 Thread ? The point is this news will impact Bitmain and any purchasers of Bitmain as it will impact the bitcoin network in general. It's also relevant as some of us were unfortunate enough to have had dealings with BFL in the past. So you think with all the presence of the (multiple) "BFL got shut by the FTC" Threads anyone would overlook that and would not be informed without that OT posting here ??! If so, they are definitely doing the wrong thing... Certainly didn't mean to offend you OCMINER by posting about BFL getting shut down. I figured the story was relevant due to the fact that there are only a small handful of companies producing this niche hardware, and secondly, just to further connect the dots, that BFL, despite their many problems, would be considered a main competitor to BitMainTech. Thus, the point. Strato Busy myself and only reading two Bitmain threads on bitcointalk.org. I was informed by the post. Thanks for posting. soy Thanks Soy, I'm the same way many times, I only have time to read my watch list. He just seemed very offended, which truthfully I didn't understand. Strato
|
|
|
|
area3121
|
|
September 25, 2014, 11:52:55 AM |
|
hope s3+ B10 will soon to sell
|
|
|
|
SunnyIgor
|
|
September 25, 2014, 11:55:12 AM |
|
the s3+ upgrade kit for s1 has been removed from bitmaintech.com I was waiting for the price to drop to get some of these. I hope they come back with a nice price!
|
|
|
|
area3121
|
|
September 25, 2014, 12:05:08 PM |
|
the s3+ upgrade kit for s1 has been removed from bitmaintech.com I was waiting for the price to drop to get some of these. I hope they come back with a nice price!
im also waiting to s3+ 10 .. buy the upgrade kit u have waiting is gone ... lol
|
|
|
|
bluecityste
Newbie
Offline
Activity: 47
Merit: 0
|
|
September 25, 2014, 01:17:37 PM |
|
Strange that it would disappear.
Normally even after selling out they stay listed for a week or two.
|
|
|
|
CryptoGuy
|
|
September 25, 2014, 01:36:14 PM |
|
Strange that it would disappear.
Normally even after selling out they stay listed for a week or two.
I'm guessing they didn't sell as many as they thought they would.
|
<Insert favorite coin here>
|
|
|
bspurloc
|
|
September 25, 2014, 02:21:32 PM |
|
Strange that it would disappear.
Normally even after selling out they stay listed for a week or two.
I'm guessing they didn't sell as many as they thought they would. didnt sell as many? it was out of stock with more coming... well Chinese english translation of "Up Coming" would get that. funny how the S4 is priced but NOT INCLUDING SHIPPING.... so over priced plus u r paying shipping.... AntMiner S4 is 1,450 USD per unit (excluding shipping) oh and I hear BFL is shutdown... oh... yeah....
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
September 25, 2014, 06:10:04 PM |
|
Have you tried increasing the freq over 250 since changing? - Looks like extra CPU might equal more work into the asics.
I've tried, but.... Still one S3 at 250, another can't do it and hashing at lower frequency.
|
|
|
|
mrpark
|
|
September 25, 2014, 06:55:50 PM |
|
can someone explain this to me? What is wrong with this picture? I am running the latest image.... Fans even hitting 12,400 RPM, pretty soon my S3 is going to be flying around the room!
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
ElGabo
|
|
September 25, 2014, 07:03:42 PM |
|
can someone explain this to me? What is wrong with this picture? I am running the latest image.... Fans even hitting 12,300 RPM, pretty soon my S3 is going to be flying around the room! Search Ebay for butterfly nets. Sorry....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
mrpark
|
|
September 25, 2014, 07:06:01 PM |
|
can someone explain this to me? What is wrong with this picture? I am running the latest image.... Fans even hitting 12,300 RPM, pretty soon my S3 is going to be flying around the room! Search Ebay for butterfly nets. Sorry.... They don't say anything in the manual about what to do when your S3 flies around the room!
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
Codemeister
Full Member
Offline
Activity: 131
Merit: 100
Hobby Miner
|
|
September 25, 2014, 07:07:24 PM |
|
Is the S3 still being produced, or will it be back on sale again soon?
|
|
|
|
|