[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[dasch]

New version of NBminer 12.1

https://github.com/NebuTech/NBMiner/releases/tag/v12.1

API doesn't works for me, hashrate is displayed in console but not in AM.

Thanks for letting me know. I will take a look at this one as the latest version may have introduced some API changes. The plan is to support the new NBMiner version in the next release.

I was just trying out version 12.2 and it shows the hashrate correctly.

If version 12.2 isn't working for you, could you please send me the API report for it (via the toolbar Tools -> API Report). Thanks!

Works fine again with version 12.2.
Problem fixed !

[1714158172]

1714158172

[1714158172]

1714158172

[patrike]

Please build add OhGodAnETHlargementPill tablet launch https://github.com/OhGodACompany/OhGodAnETHlargementPill

I know that there are many users that already added this one to the start/stop actions when running Ethereum miner. I do however agree with your point that Awesome Miner should take care of all this automatically. I will look into this for future versions.

[patrike]

Awesome Miner version 6.0.9 ( Development preview of 6.1 )

This is a smaller update that includes updated versions of mining software.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[trucobit]

Hello @PAtrike I want to suggest an easy function.

We already have an option for when AM enters to mine a currency, mine a minimum time that you can define, is very good to ensure that the miner is already hot and gives the appropriate profit. I for example use 3 minutes.

But there is something very similar that can be done and that can greatly improve the auto profit, especially with the theme of auto exchanges such as Zpool etc ... Many times in Zpool or in Nlpool when an al-go goes into profit, it it does in flash mode, that is, it makes a profit of 0.0030 and in two minutes it stabilizes much lower, even if it is not profitable, which makes a false profit change.

You could put an option next to the other where indicate that a currency when it is profitable, it should be X minutes (for example 3, 4, 5, 6 miutos) and so know that it is not auto exchange problem.

The problem is that when a currency enters into profit in the auto exchanges, they exaggerate the profit until a couple of minutes passes and re calculate the profit, and when it does the profit goes down to the real. With this option we can control even more the false changes of auto profit. They also serve for loose coins, which suddenly receive too much hash and fall into performance. For me I would use it with a time of between 3-5 minutes to make sure that the change is more likely to be successful, and leave time for the auto exchange

Thanks for the suggestion. I agree that this would be a nice feature to have.

I'm glad you liked the idea, I've seen it many times in online services that suddenly enters a strong and low al-go after two minutes but the change has already caused it.

One thing PAtrike. The statistics will be improved over time, but I urgently need to know the amount of changes by al-go and currency. Know if to get X satochis in X currency has made 2 changes or 25. I share a lot of information with my people, it is an important fact, now we have screenshots of the simple statistics that you did that are very good for now, but we do not know how many times you have made auto change and in what currency. It would be very useful.

I always asking, you already organize it as you see. Great project and every day more happy to have acquired this program.

[powerstr]

Claymore's Latest version is v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

[baf28]

Awesome Miner version 6.0.9 ( Development preview of 6.1 )

This is a smaller update that includes updated versions of mining software.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

working release, checked. thank.

[nordmann666]

how can i add config.json from xmrig to a managed host miner?

[trucobit]

https://github.com/technobyl/CryptoDredge/releases/tag/v0.15.2

new released

[baf28]

https://github.com/technobyl/CryptoDredge/releases/tag/v0.15.2

new released

I am manual add 0.15.2 and hash rate 1080 2.4MH\s to 2.7MH\s, very good

[GEBucky]

Please build add OhGodAnETHlargementPill tablet launch https://github.com/OhGodACompany/OhGodAnETHlargementPill

It would be fine for coins based on Ethash that Pill will be launched automatically or that there is an option to activate it when an Ethash coin is thrown. The hash actually goes up and for many it can be complicated to add it through a rule.

Cryptodredge 15 I hope this better optimized for rtx gives me many continus failures in HMQ1725

OhGodAnETHlargementPill is suitable for both Ethash and many other algorithms.

For what GPU's are?

it only works on gddr5 memory - so Nvidia Pascal architecture cards (1080ti, etc). I am not sure if it works on 20xx series. No AMD or "below 1080" support on Nvidia either. Also should be run as an administrator so could complicate the auto launch. Just leave it running all the time - there no no overhead to having it run. Bigger issue is you are going to need to go take your memclock way up on things like Eth to really speed it up, and then bring it back down for non memory intensive. So not sure what good auto-invoking the pill would do?

[GEBucky]

Awesome Miner version 6.0.9 ( Development preview of 6.1 )

This is a smaller update that includes updated versions of mining software.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

working release, checked. thank.

I am not getting any stats back on console when running T-rex (multiple rigs). Zenemy works fine. T-rex is getting fired up and is running fine just not passing anything back re. hashrate, shares, etc.

[baf28]

Awesome Miner version 6.0.9 ( Development preview of 6.1 )

This is a smaller update that includes updated versions of mining software.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

working release, checked. thank.

I am not getting any stats back on console when running T-rex (multiple rigs). Zenemy works fine. T-rex is getting fired up and is running fine just not passing anything back re. hashrate, shares, etc.

My T-rex works fine, I see no problems.

[baf28]

CryptoDredge 0.15.2 — NVIDIA GPU Miner

Periodically, once an hour, a huge amount of SHARE appears in the CLI window and the miner freezes.

ver 0.15.2 coda 10 win 10 2*1080 8G RAM GPU drive 416.34 MTP

12/31/2018 10: 24: 04.752 [017] [E] Failed to process API request (time: 531 ms): summary
Unable to read data from the transport connection: The remote host forcibly terminated an existing connection.
31.12.2018 10:24:04.846 [008] [W][ManagedMiner#5 - 1080_2] process not running. Restarting...
31.12.2018 10:24:04.846 [008] [S ][ManagedMiner#5 - 1080_2] Stopping...
31.12.2018 10:24:04.846 [001] [S ]Received system notification: Mining process not running, initiating restart
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Performing stop
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Prepare stopping Mining Software
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Stopping Mining Software
31.12.2018 10:24:05.861 [008] [S ]  Process already closed
31.12.2018 10:24:07.877 [008] [S ][ManagedMiner#5 - 1080_2] Starting...
..........................

log crash and dump https://yadi.sk/d/seStj67ueLw9SA

[hagie]

Hi,
are there any plans to support FPGA Miner like the BlackMiner F1 from HashAltCoins ?

https://www.hashaltcoin.com/en/miners

The Miner uses a slightly modified control board from the Antminer L3+ (CGminer Version   2.3.3)

since it supports different bitstreams (algos) switching the pool and the algo must be happen at the same time.

regards
hagie

[GoRdiE]

Hi,
are there any plans to support FPGA Miner like the BlackMiner F1 from HashAltCoins ?

https://www.hashaltcoin.com/en/miners

The Miner uses a slightly modified control board from the Antminer L3+ (CGminer Version   2.3.3)

since it supports different bitstreams (algos) switching the pool and the algo must be happen at the same time.

regards
hagie

+1

And happy new year to all!!!

[baf28]

CryptoDredge 0.15.2 — NVIDIA GPU Miner

Periodically, once an hour, a huge amount of SHARE appears in the CLI window and the miner freezes.

ver 0.15.2 coda 10 win 10 2*1080 8G RAM GPU drive 416.34 MTP

12/31/2018 10: 24: 04.752 [017] [E] Failed to process API request (time: 531 ms): summary
Unable to read data from the transport connection: The remote host forcibly terminated an existing connection.
31.12.2018 10:24:04.846 [008] [W][ManagedMiner#5 - 1080_2] process not running. Restarting...
31.12.2018 10:24:04.846 [008] [S ][ManagedMiner#5 - 1080_2] Stopping...
31.12.2018 10:24:04.846 [001] [S ]Received system notification: Mining process not running, initiating restart
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Performing stop
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Prepare stopping Mining Software
31.12.2018 10:24:05.861 [008] [S ][ManagedMiner#5 - 1080_2] Stopping Mining Software
31.12.2018 10:24:05.861 [008] [S ]  Process already closed
31.12.2018 10:24:07.877 [008] [S ][ManagedMiner#5 - 1080_2] Starting...
..........................

log crash and dump https://yadi.sk/d/seStj67ueLw9SA

this problem CryptoDredge, set diff manual and work

[baf28]

PLS add miniZ

miniZ is a fast and friendly Equihash <144,5> Cuda miner. https://miniz.ch

and

GMiner CUDA Equihash Miner v1.14 - https://bitcointalk.org/index.php?topic=5034735.0

v1.14
+ fixed "Mailformed server message" error for NiceHash

v1.13
+ added Equihash 96,5 algorithm
+ decreased memory usage for Equihash 192,7 to 2.75GB
+ decreased memory usage for Equihash 144,5 to 1.75GB
+ support client.reconnect stratum command

[slysir]

After update to latest v. 6.0.9 my Coins tab shows completely blank page. Tried all the obvious switches in coins options but no luck.

[patrike]

Claymore's Latest version is v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

Claymore Ethereum Miner v12.0 is included in the Awesome Miner development release 6.0.9.

[patrike]

how can i add config.json from xmrig to a managed host miner?

Awesome Miner doesn't have any built-in feature to populate these kind of configuration files. Is there a specific setting you need to define that cannot be specified by a command line argument instead?