[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Hi,

Can you modify CryptoNight UPX algorithm to CryptoNight UPX2 ? I need it for Uplexa coin

Thanks,
Vlad

I use the old name, what difference does it make to mining? I'm mining it with TRM.

I will add CryptoNight UPX2 as a predefined algorithm in the next update. It's also possible to manually add algorithms by following step 1, 2 and 3 here:
https://support.awesomeminer.com/support/solutions/articles/35000086025-add-a-new-algorithm

For SrbMiner there are currently both "upx" and "upx2" as algorithm names.

[trucobit]

Hello again PAtrike. You already know that in your day I asked you notes on the coins. Notes that are different from the pool. That's fine.

In those notes in the Coins tab I add texts about the currency in question, whether I'm interested or not and why, and those that I'm not interested in low-profit to lose sight of above.

It would be possible to incorporate in Tabs Coins a search engine that only searches in the notes of coins? so I can look for certain coins to which I put a text or a specific word, it will facilitate the work.

As always it is optional and under your decision. Thanks in advance.

[Siolim]

Hello.

Does anyone know how to get complexity from this explorer via GET - https://explorer.jemcash.info/  and  https://explorer.bitgrin.io/

[moppidoo]

Hello.

Does anyone know how to get complexity from this explorer via GET - https://explorer.jemcash.info/

Try

https://explorer.jemcash.info/insight-api-jemcash/status

JSON Expression:
info.difficulty

[Siolim]

Hello.

Does anyone know how to get complexity from this explorer via GET - https://explorer.jemcash.info/

Try

https://explorer.jemcash.info/insight-api-jemcash/status

JSON Expression:
info.difficulty

Thank you kind man

[Siolim]

Does anyone know how to get complexity from this explorer via GET - https://explorer.bitgrin.io/

[GKumaran]

Question : How do i run the miner instance as admin?

Request :
1. New user defined coins provider could be mapped to additonal json(coincalc or whatomine etc) as a coin provider instead of goin fully custom and mapping each parameter individually. Currently only awesome miner supported coins can be mapped to the additional json.
2. Switch SRBMiner to cli instead of config.txt

[patrike]

Hello again PAtrike. You already know that in your day I asked you notes on the coins. Notes that are different from the pool. That's fine.

In those notes in the Coins tab I add texts about the currency in question, whether I'm interested or not and why, and those that I'm not interested in low-profit to lose sight of above.

It would be possible to incorporate in Tabs Coins a search engine that only searches in the notes of coins? so I can look for certain coins to which I put a text or a specific word, it will facilitate the work.

As always it is optional and under your decision. Thanks in advance.

Thanks for the suggestion - it's noted.

[patrike]

Does anyone know how to get complexity from this explorer via GET - https://explorer.bitgrin.io/

I've just had a quick look at this one and unfortunately I couldn't see any API providing the actual data. In some cases there are block explorer that provides a web interface but no JSON data.

[patrike]

Question : How do i run the miner instance as admin?

Request :
1. New user defined coins provider could be mapped to additonal json(coincalc or whatomine etc) as a coin provider instead of goin fully custom and mapping each parameter individually. Currently only awesome miner supported coins can be mapped to the additional json.
2. Switch SRBMiner to cli instead of config.txt

Today the mining software will run as the same user as Awesome Miner / Remote Agent. Running for example Remote Agent as Admin will result in that the mining process (SrbMiner) also will run as Admin.

A side note: Right now I'm implementing support for running native overclocking features as administrator, as this is requires for some clocking parameters on the very latest nVidia drivers. Once that is completed I will also look into launching specific mining software as admin - without having to run Remote Agent as admin.

Thanks for the requests and suggestions as well

1) In this case it might be easier if Awesome Miner provided support for this new coin statistics provider right away. It will be quite some work to give full flexibility for the user to define a new provider.

2) In most cases Awesome Miner uses the CLI for mining software as it's much easier for the users to override parameters. Config files are only used if the CLI isn't providing all parameters required. In the case of SrbMiner, isn't the config file always required? Or is your point that it should simply be empty and that would make it possible to use the command line instead?

[GKumaran]

Thx for the update !!

• Ill find the remote agent and set it as admin
• SRBMiner :
  
  • Over the last few version Dok has made the miner independant of any additonal file, pretty much all configs can be run via the cli, Also makes for a leaner setup without any additonal config.txt, pool.txt etc, instead of modifying each config.txt for each algo in awesome miner 
  • The miner api also support HW errors reporting per GPU, which is currently unmapped in awesome miner xml
• New coin provider :
  • As for the provider, i dint mean a new provider as such, i meant setting up the "User defined coin" to use a coincalculator.io json which isnt in the main list of coincalculator.io api
  • eg. awesome miner defined coins like "zumy", "conceal" are not in the main coincalc.io json response, but adding them as additonal json, automatically picks up the stats
  • eg. user defined coins like "mox", have additional coincalc.io json, but are not read form them even though they are added as additional json, the diff, block reward, time json data needs to be manually configured, even though awesome miner has the coincalc.io json response template and can easily map the values on it own !! 

[patrike]

Thx for the update !!

• Ill find the remote agent and set it as admin
• SRBMiner :
  
  • Over the last few version Dok has made the miner independant of any additonal file, pretty much all configs can be run via the cli, Also makes for a leaner setup without any additonal config.txt, pool.txt etc, instead of modifying each config.txt for each algo in awesome miner  
  • The miner api also support HW errors reporting per GPU, which is currently unmapped in awesome miner xml
• New coin provider :
  • As for the provider, i dint mean a new provider as such, i meant setting up the "User defined coin" to use a coincalculator.io json which isnt in the main list of coincalculator.io api
  • eg. awesome miner defined coins like "zumy", "conceal" are not in the main coincalc.io json response, but adding them as additonal json, automatically picks up the stats
  • eg. user defined coins like "mox", have additional coincalc.io json, but are not read form them even though they are added as additional json, the diff, block reward, time json data needs to be manually configured, even though awesome miner has the coincalc.io json response template and can easily map the values on it own !!  

SrbMiner - Awesome Miner isn't adding too much configuration in config.txt, so for most settings you should be able to just add command line parameters. Was it a specific scenario or parameter that isn't possible to add this way when the configuration file is present?
I will look into the HW error API property.

Coin provider - As you probably know already, in the Options dialog, Statistics Provider section, you can add the non-main coins for WhatToMine and CoinCalculators. You can paste the URL to the JSON file for CoinCalculators here for example.
Is it only Mox that isn't working? When I add the following URL, it loads all coin data correctly:
https://www.coincalculators.io/api.aspx?name=mox
I do see Mox in the Coins tab after adding this, and it includes difficulty, block reward and everything else.

[Binary100100]

Suggestion:

Is it possible to add the option to display the balances in the WEBGUI dashboard?

[patrike]

Suggestion:

Is it possible to add the option to display the balances in the WEBGUI dashboard?

Thanks for the suggestion. I do know the web interface is a bit limited in terms of features today, but the plan is to continue adding more features in the future. Balance would also make sense to add.

[powerstr]

CryptoDredge v0.19.0
New Argon2d (250/4096) algorithms
Improve MTP algorithm
Improve CryptonightGPU and CryptoNight-like algorithms
Remove obsolete algorithms
Other minor fixes

[moppidoo]

CryptoDredge v0.19.0
New Argon2d (250/4096) algorithms
Improve MTP algorithm
Improve CryptonightGPU and CryptoNight-like algorithms
Remove obsolete algorithms
Other minor fixes

and according to discord, removed algorithms are as follows for quick reference:

Code:

C11, CryptoNightFast, CryptoNightSuperFast, CryptoNightV7, Dedal and PHI1612

[moppidoo]

Hi Patrike,

in addition to several GPU miners are available for Argon2D + variants, is there any way to map multi algo coins such as XMY more effectively since they all share the same ticker (short name)?

eg. Myriad_Argon2d from Coincalculators is determined by AM as Argon2d-DYN, but the coin itself is actually using Argon2d4096

Just mapping XMY to the right algo results in AM mapping the yescrypt variant instead of the Argon2D.

Thanks in advance!

Best Regards,

[GKumaran]

Thx for the update !!

• Ill find the remote agent and set it as admin
• SRBMiner :
  
  • Over the last few version Dok has made the miner independant of any additonal file, pretty much all configs can be run via the cli, Also makes for a leaner setup without any additonal config.txt, pool.txt etc, instead of modifying each config.txt for each algo in awesome miner 
  • The miner api also support HW errors reporting per GPU, which is currently unmapped in awesome miner xml
• New coin provider :
  • As for the provider, i dint mean a new provider as such, i meant setting up the "User defined coin" to use a coincalculator.io json which isnt in the main list of coincalculator.io api
  • eg. awesome miner defined coins like "zumy", "conceal" are not in the main coincalc.io json response, but adding them as additonal json, automatically picks up the stats
  • eg. user defined coins like "mox", have additional coincalc.io json, but are not read form them even though they are added as additional json, the diff, block reward, time json data needs to be manually configured, even though awesome miner has the coincalc.io json response template and can easily map the values on it own !! 

SrbMiner - Awesome Miner isn't adding too much configuration in config.txt, so for most settings you should be able to just add command line parameters. Was it a specific scenario or parameter that isn't possible to add this way when the configuration file is present?
I will look into the HW error API property.

Coin provider - As you probably know already, in the Options dialog, Statistics Provider section, you can add the non-main coins for WhatToMine and CoinCalculators. You can paste the URL to the JSON file for CoinCalculators here for example.
Is it only Mox that isn't working? When I add the following URL, it loads all coin data correctly:
https://www.coincalculators.io/api.aspx?name=mox
I do see Mox in the Coins tab after adding this, and it includes difficulty, block reward and everything else.

SRBMiner : Nothing much !! Both cli and config.txt method are well designed. I asked since it was merely a convinience method
Coin Provider : It wasnt working for Nimiq and Torque(or Stellite) so i assumed all jsons dont work. Sorry, other jsons work great 

Hi Patrike,

in addition to several GPU miners are available for Argon2D + variants, is there any way to map multi algo coins such as XMY more effectively since they all share the same ticker (short name)?

eg. Myriad_Argon2d from Coincalculators is determined by AM as Argon2d-DYN, but the coin itself is actually using Argon2d4096

Just mapping XMY to the right algo results in AM mapping the yescrypt variant instead of the Argon2D.

Thanks in advance!

Best Regards,

There is an internal override to change the algo. It works great, ive mapped mine to argon2d-250,argon2d-500,argon2d-4096, only the argon2d-nim isnt mapping as stated above.

[patrike]

CryptoDredge v0.19.0
New Argon2d (250/4096) algorithms
Improve MTP algorithm
Improve CryptonightGPU and CryptoNight-like algorithms
Remove obsolete algorithms
Other minor fixes

and according to discord, removed algorithms are as follows for quick reference:

Code:

C11, CryptoNightFast, CryptoNightSuperFast, CryptoNightV7, Dedal and PHI1612

Thanks for the update and details - there will soon be a new release with this update

[patrike]

Hi Patrike,

in addition to several GPU miners are available for Argon2D + variants, is there any way to map multi algo coins such as XMY more effectively since they all share the same ticker (short name)?

eg. Myriad_Argon2d from Coincalculators is determined by AM as Argon2d-DYN, but the coin itself is actually using Argon2d4096

Just mapping XMY to the right algo results in AM mapping the yescrypt variant instead of the Argon2D.

Thanks in advance!

Best Regards,

I understand your point here. Today the algorithm override mapping that can be used to correct the algorithm of a coin from a provider only looks as the coin name as you noticed. I will make an update for this quite soon, so allow you to specify a specific algorithm to map from.