presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 25, 2015, 05:55:17 AM |
|
You do not need a linux machine to install this. You could buy an sd card or emmc with linux preinstalled with the odroid. Once you have it all plugged in and powered on you can either use it as a traditional computer (with keyboard mouse monitor) or use it headless and ssh to the odroid to perform the commands to compile the wallet.
buy emmc or sdcard loaded with linux from odroid,is this correct?? so if i get the sdcard for 8 buck , can it be copied on a windows machine , i few afew sdcard sitting around doing nothing want to make use of it I bought my sdcard preloaded with lubuntu from odroid. I will probably end up paying the extra money to get an emmc soon though. I don't see why you couldn't load an sdcard yourself with the operating system. You have just got to ask yourself whether it is worth it to pay $8 extra to save the hassle. Also I decided it was worth it to pay $4 extra for the heat sync (since hashing can heat the cpu up a bit). I leave my odroid on all day and it stays warm but is never hot. I also got the wifi usb adapter, power cord, case, and a micro hdmi to hdmi cord. The whole setup cost me about $80 including the sd card. To install HyperStake, it will be pretty easy. Just open terminal and copy and paste each line and press enter.
|
|
|
|
Real_Unhooked
|
|
February 25, 2015, 07:35:42 AM |
|
Hot damm I love this coin!!! Still going strong after all this time. Kudos to presstab and David for sticking with this coin
|
|
|
|
David Latapie
|
|
February 25, 2015, 08:41:42 AM |
|
Hot damm I love this coin!!! Still going strong after all this time. Kudos to presstab and David for sticking with this coin
And Kudos to to still be here too
|
|
|
|
m33
Legendary
Offline
Activity: 1064
Merit: 1000
Never invest with borrowed coins
|
|
February 25, 2015, 09:58:32 AM |
|
I bought my sdcard preloaded with lubuntu from odroid. I will probably end up paying the extra money to get an emmc soon though. I don't see why you couldn't load an sdcard yourself with the operating system. You have just got to ask yourself whether it is worth it to pay $8 extra to save the hassle. Also I decided it was worth it to pay $4 extra for the heat sync (since hashing can heat the cpu up a bit). I leave my odroid on all day and it stays warm but is never hot. I also got the wifi usb adapter, power cord, case, and a micro hdmi to hdmi cord. The whole setup cost me about $80 including the sd card.
To install HyperStake, it will be pretty easy. Just open terminal and copy and paste each line and press enter.
the power cord is usb? and what does the micro hdmi to hdmi cord do? do you think it the c-1 ,can run 3 wallets? hyp , orb and tek. if cant than i need buy more of the c-1 to copy the sdcard (purchase from odriod) do i need a linux system ? " ssh to the odroid " is this a linux thing?
|
|
|
|
infovortice2013
Legendary
Offline
Activity: 1176
Merit: 1000
|
|
February 25, 2015, 10:34:22 AM |
|
What quanty of blocks is good to use?? i keep over 3k HYP blocks but more than 30 days and not staking ..... i updated the wallet in good time of fork, maybe need bigger blocks to stake now.
|
|
|
|
iantunc
Sr. Member
Offline
Activity: 433
Merit: 250
We are the first to program your future (c)
|
|
February 25, 2015, 11:34:20 AM |
|
Hot damm I love this coin!!! Still going strong after all this time. Kudos to presstab and David for sticking with this coin
This coin is a cutting-edge technology in it's sphere. It wouldn't be wise to abandon it
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
February 25, 2015, 11:46:38 AM |
|
What quanty of blocks is good to use?? i keep over 3k HYP blocks but more than 30 days and not staking ..... i updated the wallet in good time of fork, maybe need bigger blocks to stake now. @infovortice2013: I've had my blocks sized from 4K up to 5K over the past month, and it's served me well, with most of my block staking around 15 days of age. I think that you're ok with 3K sizes, but your blocks will take longer to stake, as you are seeing. Remember also that luck plays a big factor in staking, so one or a few blocks taking extra long, is nothing extraordinary. My personal recommendation for sizing today (for new/fresh blocks) is around 5K to 6K. Happy Staking!
|
|
|
|
iantunc
Sr. Member
Offline
Activity: 433
Merit: 250
We are the first to program your future (c)
|
|
February 25, 2015, 11:58:27 AM |
|
What quanty of blocks is good to use?? i keep over 3k HYP blocks but more than 30 days and not staking ..... i updated the wallet in good time of fork, maybe need bigger blocks to stake now. I had a bunch of 4K blocks in a row that had staked within 10th day timeframe (a couple of days ago, with the diff almost on it's peak). Personally I stay with the long-time community convention of 4K. These blocks stake in 20-25 days on average.
|
|
|
|
billotronic
Legendary
Offline
Activity: 1610
Merit: 1000
Crackpot Idealist
|
|
February 25, 2015, 03:19:12 PM |
|
I bought my sdcard preloaded with lubuntu from odroid. I will probably end up paying the extra money to get an emmc soon though. I don't see why you couldn't load an sdcard yourself with the operating system. You have just got to ask yourself whether it is worth it to pay $8 extra to save the hassle. Also I decided it was worth it to pay $4 extra for the heat sync (since hashing can heat the cpu up a bit). I leave my odroid on all day and it stays warm but is never hot. I also got the wifi usb adapter, power cord, case, and a micro hdmi to hdmi cord. The whole setup cost me about $80 including the sd card.
To install HyperStake, it will be pretty easy. Just open terminal and copy and paste each line and press enter.
the power cord is usb? and what does the micro hdmi to hdmi cord do? do you think it the c-1 ,can run 3 wallets? hyp , orb and tek. if cant than i need buy more of the c-1 to copy the sdcard (purchase from odriod) do i need a linux system ? " ssh to the odroid " is this a linux thing? The only way to connect the odroid u3 to a display is via HDMI. The HDMI port on the u3 is micro HDMI so you need to go from micro to regular HDMI. I'm not sure about the c1. I think I might buy one though to play with. If you buy a sd card from odroid it does not need to be copied. It is ready to go. Using your own is pretty easy also. SSH is universally awesome and cross platform.
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 25, 2015, 03:44:52 PM |
|
I bought my sdcard preloaded with lubuntu from odroid. I will probably end up paying the extra money to get an emmc soon though. I don't see why you couldn't load an sdcard yourself with the operating system. You have just got to ask yourself whether it is worth it to pay $8 extra to save the hassle. Also I decided it was worth it to pay $4 extra for the heat sync (since hashing can heat the cpu up a bit). I leave my odroid on all day and it stays warm but is never hot. I also got the wifi usb adapter, power cord, case, and a micro hdmi to hdmi cord. The whole setup cost me about $80 including the sd card.
To install HyperStake, it will be pretty easy. Just open terminal and copy and paste each line and press enter.
the power cord is usb? and what does the micro hdmi to hdmi cord do? do you think it the c-1 ,can run 3 wallets? hyp , orb and tek. if cant than i need buy more of the c-1 to copy the sdcard (purchase from odriod) do i need a linux system ? " ssh to the odroid " is this a linux thing? The only way to connect the odroid u3 to a display is via HDMI. The HDMI port on the u3 is micro HDMI so you need to go from micro to regular HDMI. I'm not sure about the c1. I think I might buy one though to play with. If you buy a sd card from odroid it does not need to be copied. It is ready to go. Using your own is pretty easy also. SSH is universally awesome and cross platform. The c1 also uses micro hdmi for its display output. @m33 I have only run HYP on it, and nothing else at the same time. Maybe I will try installing a few more coins and see how it runs.
|
|
|
|
infovortice2013
Legendary
Offline
Activity: 1176
Merit: 1000
|
|
February 25, 2015, 06:12:29 PM |
|
thanks for blocks info, yeah i think must up to 5 -6 k per block to catch some good profit in time and not loose resources
|
|
|
|
Hilux74
Legendary
Offline
Activity: 912
Merit: 1000
|
|
February 25, 2015, 06:26:50 PM |
|
Thanks to whoever filled my buy order at 202 at Cryptsy yesterday. That was a pleasant surprise...thank goodness for auto-split!
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 25, 2015, 07:42:22 PM |
|
Thanks to whoever filled my buy order at 202 at Cryptsy yesterday. That was a pleasant surprise...thank goodness for auto-split! I was able to get some at 200 sats Someone else's inability to sell over a longer time span is my gain and their loss... literally.
|
|
|
|
4x13
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
February 26, 2015, 01:57:51 AM |
|
@presstab I backed up wallet, then delete everything, re-downloaded the wallet and re-synced. re imported the address, and still nothing. Ideas anyone?? still shows on the blockchain as being 66k HYP there...
After downloading and re-syncing this is my wallet version
{ "version" : "v1.1.0.0HyperStake-1.1", "protocolversion" : 72000, "walletversion" : 60000, "balance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "blocks" : 247540, "moneysupply" : 125067360.68847400, "connections" : 2, "proxy" : "", "ip" : "68.104.3.84", "difficulty" : 13.78808848, "testnet" : false, "keypoololdest" : 1424834544, "keypoolsize" : 101, "paytxfee" : 0.00000000, "errors" : "" }
looks the same as before, but you said I am on the wrong fork.
Not sure whats going on now..
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 26, 2015, 03:37:35 AM |
|
@presstab I backed up wallet, then delete everything, re-downloaded the wallet and re-synced. re imported the address, and still nothing. Ideas anyone?? still shows on the blockchain as being 66k HYP there...
After downloading and re-syncing this is my wallet version
{ "version" : "v1.1.0.0HyperStake-1.1", "protocolversion" : 72000, "walletversion" : 60000, "balance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "blocks" : 247540, "moneysupply" : 125067360.68847400, "connections" : 2, "proxy" : "", "ip" : "68.104.3.84", "difficulty" : 13.78808848, "testnet" : false, "keypoololdest" : 1424834544, "keypoolsize" : 101, "paytxfee" : 0.00000000, "errors" : "" }
looks the same as before, but you said I am on the wrong fork.
Not sure whats going on now..
Looks like the correct chain. And your coins havent shown up after importing your keys to a fresh wallet? That seems odd. One more trick you can try is "rescanfromblock 1" If none of this works you can email your privkey to me and I will see if I can package your key into a functional wallet.dat for you. presstab1337@gmail.comLet me know if you get anything to work, if not I am happy to help out.
|
|
|
|
m33
Legendary
Offline
Activity: 1064
Merit: 1000
Never invest with borrowed coins
|
|
February 26, 2015, 07:42:13 AM |
|
Thanks to whoever filled my buy order at 202 at Cryptsy yesterday. That was a pleasant surprise...thank goodness for auto-split! I was able to get some at 200 sats Someone else's inability to sell over a longer time span is my gain and their loss... literally. i got lucky today , 1 of my 2k block minted ,send 30% to polo via multisend, sold at 239 . #presstab i order 2 unit of c-1 with 1 sdcard , if you manage to run more than 1 coin pls , i like to know. these coin take to much power from my old laptop . i5 asus n53s cant handle the load
|
|
|
|
5ick3uffalo
Legendary
Offline
Activity: 994
Merit: 1000
|
|
February 26, 2015, 08:51:24 AM Last edit: February 26, 2015, 09:13:01 AM by 5ick3uffalo |
|
Hi, i downloaded Blockchain and put in my old backuped wallet.dat but my balance (pLtfYzxps97J5kQW1Yr4g3EGSgMV6vZeee) not showing up? Hmm... edit: all good , stashed away my Privatekey and imported him. No reaction for a while but now all good
|
BTC: 1Dw9feZAGSeHvaiQ55T7C92VAAXB2nVKKk
|
|
|
nioc
Legendary
Offline
Activity: 1624
Merit: 1008
|
|
February 26, 2015, 09:47:51 AM |
|
I just had a block split where the new blocks were exactly 250 HYP less than the setstakesplitthreshold
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 26, 2015, 03:54:11 PM |
|
I just had a block split where the new blocks were exactly 250 HYP less than the setstakesplitthreshold
I will look into this, thanks for reporting
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
February 26, 2015, 03:55:39 PM |
|
Hi, i downloaded Blockchain and put in my old backuped wallet.dat but my balance (pLtfYzxps97J5kQW1Yr4g3EGSgMV6vZeee) not showing up? Hmm... edit: all good , stashed away my Privatekey and imported him. No reaction for a while but now all good Good to hear Sometimes repairwallet will work for this type of thing, sometimes not. A complete reimport should work all the time
|
|
|
|
|