[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[rednoW]

No problem use minercontrol in other pool and i use - suprnova mininghubpool coinminers - work is good and mc not ddos this pool.
I just want to mine on your pool as a thank you for developing the ccminer. Update the configuration of your pool, because the other pools work fine with the minercontrol.
upd. i dont use parser mode,dont use ballance,speed - only price - and banned

just don't use minercontrol - it is obvious.

[rednoW]

Hello guys, i have a problem.
5x1070  overclocked  (temp below 60 degress), win7 x64, AMD Athlon II
Miner has an error after 6-12 hours of mining
"quark_blake512_cpu_setBlock_80"
One off gpu turn off from system (always different gpu)

What can it be ?

it is hardware related problem. You either oc to much or have power supply problems (or bad contacts)

[pomestnik]

Hello guys, i have a problem.
5x1070  overclocked  (temp below 60 degress), win7 x64, AMD Athlon II
Miner has an error after 6-12 hours of mining
"quark_blake512_cpu_setBlock_80"
One off gpu turn off from system (always different gpu)

What can it be ?

it is hardware related problem. You either oc to much or have power supply problems (or bad contacts)

Yep, i think it's because oc.  I just wonder why it works during 6 and more hours  well, and only then die )
Does my weak cpu may be a reason ?

[rednoW]

Hello guys, i have a problem.
5x1070  overclocked  (temp below 60 degress), win7 x64, AMD Athlon II
Miner has an error after 6-12 hours of mining
"quark_blake512_cpu_setBlock_80"
One off gpu turn off from system (always different gpu)

What can it be ?

it is hardware related problem. You either oc to much or have power supply problems (or bad contacts)

Yep, i think it's because oc.  I just wonder why it works during 6 and more hours  well, and only then die )
Does my weak cpu may be a reason ?

no, cpu cannot be. It is common behavior with nvidia cards when you are on the thin edge between max speed and low power. It can work even several days and then crash. Just lower your o/c.

[ioglnx]

The pool is not paying out the balance - last payout time is displayed as 13:12 CEST..now we have 16:48.

[Epsylon3]

wrong thread for that, but that was "fixed".

Its not required to notify me these issues... in all cases the loop task is reset 2 times per day

[sibisi666]

The pool is not paying out the balance - last payout time is displayed as 13:12 CEST..now we have 16:48.

which pool?

[dadesu]

Can you pls fix result does not validate on cpu in new cc for x13 algo?

[Epsylon3]

x13 has asics, but indeed, need to check these shared mem issues

[hesdeadjim]

hello everyone

thanks for the awesome software..

i was wondering if running three instances of ccminer was a limit of the program or of my system.

when i run more than three the software locks up and has to be forced to shut down.

each instance is one coin, by the way.

i've only been mining for about 4 months so i'm still pretty new to this stuff.

thanks

 

[Epsylon3]

the kernels using gpu shared mem doesnt like that...

[chrysophylax]

unless in a multi-card system ...

you can set each card to mine a different coin - as a separate instance ...

but as epsylon3 mentioned - if you are doing this on ALL the cards at the same time - it will not work ...

and he would know ...

#crysx

[Jabstep]

Hey guys.
I have a problem when trying to mine from zpool.ca.
I'm trying to mine CXT with nist5, but for some reason it mines all the coins the algo can mine.
The miner's bat file looks like this: ccminer-x64.exe -a nist5 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u MYADDRESS -p c=CXT

Picture from the pool: http://prntscr.com/fx66ww

Any help would be great  
Thanks !

[hesdeadjim]

the kernels using gpu shared mem doesnt like that...

unless in a multi-card system ...

you can set each card to mine a different coin - as a separate instance ...

but as epsylon3 mentioned - if you are doing this on ALL the cards at the same time - it will not work ...

and he would know ...

#crysx

Thanks for the quick answers.

the whole multi-pool in one conf / multi instance thing is still a bit confusing to me but i'm getting there.

i did have one card per coin and it worked fine, i just like to play around sometimes.

[ioglnx]

Hey guys.
I have a problem when trying to mine from zpool.ca.
I'm trying to mine CXT with nist5, but for some reason it mines all the coins the algo can mine.
The miner's bat file looks like this: ccminer-x64.exe -a=nist5 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u MYADDRESS -p c=CXT

Picture from the pool: http://prntscr.com/fx66ww

Any help would be great 
Thanks !

This is normal - I also asked the pool op why and he said if I want solo coin mining i should go somewhere else.
So maybe you also write the poolop you want the same..so we re two..

[Jabstep]

Hey guys.
I have a problem when trying to mine from zpool.ca.
I'm trying to mine CXT with nist5, but for some reason it mines all the coins the algo can mine.
The miner's bat file looks like this: ccminer-x64.exe -a=nist5 -o stratum+tcp://nist5.mine.zpool.ca:3833 -u MYADDRESS -p c=CXT

Picture from the pool: http://prntscr.com/fx66ww

Any help would be great 
Thanks !

This is normal - I also asked the pool op why and he said if I want solo coin mining i should go somewhere else.
So maybe you also write the poolop you want the same..so we re two..

I see,
There is this other pool http://2.coinminers.net which is supposed to mine only CXT but I can't see the results anywhere. All I see is hashrate and the amount of workers.
I'll write to the Pool's OP then, hopefully more people will join
Thanks for the information.

[ioglnx]

At these pool I didn't get my CXT paid - I mined there too some hours but sofar no coins received nor I know how much CXT I have earned but I was 4times faster than the current fastest.

[wgibzzz]

Hi there. Got an error with ccminer on archlinux and nvidia 670gtx

Code:

[2017-07-19 11:35:59] GPU #0: Intensity set to 23, 8388608 cuda threads
[2017-07-19 11:35:59] GPU #0: aes_cpu_init invalid device symbol
Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : invalid device symbol.

ccminer was compiled from source, setted compatability-3.0 flags in Makefile.am

Code:

nvcc_ARCH = -gencode=arch=compute_30,code=\"sm_30,compute_30\"

more info:
cuda version: 8.0
nvidia driver version: 381.22

[scryptr]

TPRUVOT, A LOOK AT THE DEV SNAPSHOT FOR CCMINER 2.2?  --

Would it be possible to try the developer's snapshot for your latest CCminer?  Apparently your testing crew has it in use on YIIMP.    Thanks!       --scryptr

[lupanar]

Hi there, any plans to make some binaries for SkunkHash Raptor algo?