[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[startsts]

Why no response on my problem?  

this ccminer sends few shares on some pools (pool shows wrong hashrate) , only param  "--submit-stale" can help at this situation
How to fix stratum software?  Why ccminer thinks that some shares are stale while it isn't truth ? (no new job/block received yet)

try lower intensity

Tried, same situation

I think your card is slow and producing stale shares. Make sure you don't use any 'static-diff' or nicehash stratum ports. Just go for the small diff./vardiff stratum (maybe even CPU ports). Also you could add the "--submit-stale" switch (depends on pool if it is accepted or not).

Why ccminer-alexis works differently? It submits stale shares by default or what difference is?

Something with forks and source code

what??? how it depends on coins source code???     it's all stratum fault, but nobody says here how to fix

[1714980026]

1714980026

[1714980026]

1714980026

[1714980026]

1714980026

[ReallyMe]

...anyone have an idea, why Windows 10 Defender v1.257.1281.0 alarms “Win32/Tiggre!plock detected” in the ccminer.exe 2.2 mod r2 (ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining)
and moves the file away into "quarantine"!!??

I am a bit worried I quess since I've been using the ccminer for quite a long time....

File name: ccminer.exe
File size: 11,913,216 Bytes
MD5: f42b688c88b28653356f4ce5ff046ab7
SHA-1: 3593d7f22eb82c82a20d1c051adcd62a4aa8490e
SHA-256: 5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd

[m1n1ngP4d4w4n]

...anyone have an idea, why Windows 10 Defender v1.257.1281.0 alarms “Win32/Tiggre!plock detected” in the ccminer.exe 2.2 mod r2 (ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining)
and moves the file away into "quarantine"!!??

I am a bit worried I quess since I've been using the ccminer for quite a long time....

File name: ccminer.exe
File size: 11,913,216 Bytes
MD5: f42b688c88b28653356f4ce5ff046ab7
SHA-1: 3593d7f22eb82c82a20d1c051adcd62a4aa8490e
SHA-256: 5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd

This miner is a fork of the original miner by Tpruvot, so you may not get any support here, that said alot of exe packager and compressor are being detected as virus & trojan by most antivirus so don't get too worried.

One thing that you should always check and be worried about, is the source of your miners, always get them directly from the developers depot or official post on this forum for example, not some shaddy websites.

https://github.com/Nanashi-Meiyo-Meijin/ccminer/releases, list both cuda8 and cuda9 version of the 2.2 R2, and none of them match the checksums you gave, so im betting you didn't got them from here. And that's bad. The binaries could have been compiled by some other guy and be perfectly safe, but never believe it, always get the originals if you aren't 100% of the source.

Also you have to know, at least to my knowledge and experience, this ccminer fork by nanashi isn't the best anymore to mine the lyra2v2 algo nowadays, i personally use excavator and it's working much better (15% more hash)

Try again with the good binaries if you want to use this ccminer fork for lyra2rev2 coins, otherwise i invite you to check out excavator.

Good luck.

[ReallyMe]

...anyone have an idea, why Windows 10 Defender v1.257.1281.0 alarms “Win32/Tiggre!plock detected” in the ccminer.exe 2.2 mod r2 (ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining)
and moves the file away into "quarantine"!!??

I am a bit worried I quess since I've been using the ccminer for quite a long time....

File name: ccminer.exe
File size: 11,913,216 Bytes
MD5: f42b688c88b28653356f4ce5ff046ab7
SHA-1: 3593d7f22eb82c82a20d1c051adcd62a4aa8490e
SHA-256: 5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd

This miner is a fork of the original miner by Tpruvot, so you may not get any support here, that said alot of exe packager and compressor are being detected as virus & trojan by most antivirus so don't get too worried.

One thing that you should always check and be worried about, is the source of your miners, always get them directly from the developers depot or official post on this forum for example, not some shaddy websites.

https://github.com/Nanashi-Meiyo-Meijin/ccminer/releases, list both cuda8 and cuda9 version of the 2.2 R2, and none of them match the checksums you gave, so im betting you didn't got them from here. And that's bad. The binaries could have been compiled by some other guy and be perfectly safe, but never believe it, always get the originals if you aren't 100% of the source.

Also you have to know, at least to my knowledge and experience, this ccminer fork by nanashi isn't the best anymore to mine the lyra2v2 algo nowadays, i personally use excavator and it's working much better (15% more hash)

Try again with the good binaries if you want to use this ccminer fork for lyra2rev2 coins, otherwise i invite you to check out excavator.

Good luck.

Hi m1n1ngP4d4w4n,
thank you much for your response. You're right, I got mine from
http://cryptomining-blog.com/wp-content/download/ccminer-2.2-mod-r2.zip by way of http://cryptomining-blog.com/tag/lyra2rev2/
not from the official site, apparently. Is http://cryptomining-blog.com considered to be a shaddy website? I dunno...

I would love to try "excavator" optimized for lyra2rev2 @ NVIDIA GeForce GTX 1080 Ti instead but I have no clue which version to download and what the command line arguments are?

The best results I got so far (e.g. LAPool) were with the ccminer.exe:
> ccminer.exe -a lyra2v2 -o stratum+tcp://jp.lapool.me:4155 -u blablabla.worker1 -p foobar

What would be the equivalent line for "excavator"

Thanks in advance!

[scryptr]

...anyone have an idea, why Windows 10 Defender v1.257.1281.0 alarms “Win32/Tiggre!plock detected” in the ccminer.exe 2.2 mod r2 (ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining)
and moves the file away into "quarantine"!!??

I am a bit worried I quess since I've been using the ccminer for quite a long time....

File name: ccminer.exe
File size: 11,913,216 Bytes
MD5: f42b688c88b28653356f4ce5ff046ab7
SHA-1: 3593d7f22eb82c82a20d1c051adcd62a4aa8490e
SHA-256: 5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd

This miner is a fork of the original miner by Tpruvot, so you may not get any support here, that said alot of exe packager and compressor are being detected as virus & trojan by most antivirus so don't get too worried.

One thing that you should always check and be worried about, is the source of your miners, always get them directly from the developers depot or official post on this forum for example, not some shaddy websites.

https://github.com/Nanashi-Meiyo-Meijin/ccminer/releases, list both cuda8 and cuda9 version of the 2.2 R2, and none of them match the checksums you gave, so im betting you didn't got them from here. And that's bad. The binaries could have been compiled by some other guy and be perfectly safe, but never believe it, always get the originals if you aren't 100% of the source.

Also you have to know, at least to my knowledge and experience, this ccminer fork by nanashi isn't the best anymore to mine the lyra2v2 algo nowadays, i personally use excavator and it's working much better (15% more hash)

Try again with the good binaries if you want to use this ccminer fork for lyra2rev2 coins, otherwise i invite you to check out excavator.

Good luck.

Hi m1n1ngP4d4w4n,
thank you much for your response. You're right, I got mine from
http://cryptomining-blog.com/wp-content/download/ccminer-2.2-mod-r2.zip by way of http://cryptomining-blog.com/tag/lyra2rev2/
not from the official site, apparently. Is http://cryptomining-blog.com considered to be a shaddy website? I dunno...

I would love to try "excavator" optimized for lyra2rev2 @ NVIDIA GeForce GTX 1080 Ti instead but I have no clue which version to download and what the command line arguments are?

The best results I got so far (e.g. LAPool) were with the ccminer.exe:
> ccminer.exe -a lyra2v2 -o stratum+tcp://jp.lapool.me:4155 -u blablabla.worker1 -p foobar

What would be the equivalent line for "excavator"

Thanks in advance!

THERE IS NO EQUIVALENT LINE--

Excavator is a powerful mining program that requires a configuration file.  It will overclock or underclock core and memory, and set power limits, all defined in the configuration file.  Excavator can launch a web interface for remote monitoring and control.  It will dual-mine with Ethereum when configured properly, but Lyra2v2 is not known to be compatible with dual-mining.

I haven't written a Lyra2v2 configuration for Excavator, currently CryptoNight is a better choice.  If I get the time, I will share a Lyra2v2 configuration.  However, this is a CCminer thread, and Epsylon3 does not like off-topic posts.

For what it is worth, CCminer autotunes and mines CryptoNight with less fuss and bother than Excavator, and slightly faster.  I get 750-780+ H/s at 6.25H/watt console with my 1080ti, and 630H/s at 9H/watt console with my 1070ti.  My 1070ti mines  CryptoNight slightly faster than my 980ti cards, and at about 1/2 the wattage.  CCminer reports hash-rate and wattage to the console window.  Excavator ports equivalent data to a web page.       --scryptr

EDIT:  Currently CCminer is significantly faster (+ ~40%, depending on GPU model) while mining CryptoNight when compared to Excavator.  However, the  script-level monitoring and control provided by Excavator make it a tempting rival.       --scryptr

[m1n1ngP4d4w4n]

Hi m1n1ngP4d4w4n,
thank you much for your response. You're right, I got mine from
http://cryptomining-blog.com/wp-content/download/ccminer-2.2-mod-r2.zip by way of http://cryptomining-blog.com/tag/lyra2rev2/
not from the official site, apparently. Is http://cryptomining-blog.com considered to be a shaddy website? I dunno...

I would love to try "excavator" optimized for lyra2rev2 @ NVIDIA GeForce GTX 1080 Ti instead but I have no clue which version to download and what the command line arguments are?

The best results I got so far (e.g. LAPool) were with the ccminer.exe:
> ccminer.exe -a lyra2v2 -o stratum+tcp://jp.lapool.me:4155 -u blablabla.worker1 -p foobar

What would be the equivalent line for "excavator"

Thanks in advance!

Scryptr is absolutely right, this is a very different program, and i don't want to go off-topic with this. So i will post for you what's needed in the excavator topic. I'll send you a PM with the link.

That said the binaries of CCminer you got from the cryptomining blog *should* be safe, they've just probably been compiled by someone else, without the static libraries (hence a filesize much smaller)

Cheers.

[ReallyMe]

THERE IS NO EQUIVALENT LINE--

Excavator is a powerful mining program that requires a configuration file.  It will overclock or underclock core and memory, and set power limits, all defined in the configuration file.  Excavator can launch a web interface for remote monitoring and control.  It will dual-mine with Ethereum when configured properly, but Lyra2v2 is not known to be compatible with dual-mining.

I haven't written a Lyra2v2 configuration for Excavator, currently CryptoNight is a better choice.  If I get the time, I will share a Lyra2v2 configuration.  However, this is a CCminer thread, and Epsylon3 does not like off-topic posts.

For what it is worth, CCminer autotunes and mines CryptoNight with less fuss and bother than Excavator, and slightly faster.  I get 750-780+ H/s at 6.25H/watt console with my 1080ti, and 630H/s at 9H/watt console with my 1070ti.  My 1070ti mines  CryptoNight slightly faster than my 980ti cards, and at about 1/2 the wattage.  CCminer reports hash-rate and wattage to the console window.  Excavator ports equivalent data to a web page.       --scryptr

Scryptr is absolutely right, this is a very different program, and i don't want to go off-topic with this. So i will post for you what's needed in the excavator topic. I'll send you a PM with the link.

That said the binaries of CCminer you got from the cryptomining blog *should* be safe, they've just probably been compiled by someone else, without the static libraries (hence a filesize much smaller)

Cheers.

Thank you guys, your help is much appreciated. I will look into this shortly. I am also kind of relieved to hear that the ccminer.exe I've been using is likely "harmless". Thanks for checking and letting me know...
Have a nice day 

[NameTaken]

Are there any plans to add the MARS algorithm for Minexcoin?

[Epsylon3]

no, well i tried without success (and a big headache)

[sp_]

Should be an easy copy and paste job from the Tromp kernel. No?

[Epsylon3]

so will let you do it lol

[startsts]

So still no solution with my problem???

Why this ccminer consider 80% of shares as stale and doesn't send them to stratum?  What job rebroadcast interval should be to avoid this problem? Or maybe another stratum setting

[sp_]

so will let you do it lol

Sa va bien???

[restless]

Tried mining LUXcoin on 4*1060
It starts well, runs ~11mh/card, but after 10-15min the speed goes down to ~31MH, with 2 cards running at 5mh
The 2 slow cards are roatting, eg in stats I can see that there are 2 fast and slow cards, which chagne their speed fast-slow-fast-slow...

Any idea for the reason!?
I do see ccminer is running 100% on 1 core - the PC is bit outdated i3-530...
There is NO overheating, increased power limit, just in case ... ideas?

The drop is ~ 1mh/minute...
After 20min speed was down to 24MH, down from 43 at the beginning
CPU limited?!

[m1n1ngP4d4w4n]

So still no solution with my problem???

Why this ccminer consider 80% of shares as stale and doesn't send them to stratum?  What job rebroadcast interval should be to avoid this problem? Or maybe another stratum setting

doesn't

Code:

--submit-stale    ignore stale jobs checks, may create more rejected shares

help you with this ?

so will let you do it lol

Sa va bien???

Yes _sp show us dem skills   (j/k)

[startsts]

So still no solution with my problem???

Why this ccminer consider 80% of shares as stale and doesn't send them to stratum?  What job rebroadcast interval should be to avoid this problem? Or maybe another stratum setting

doesn't

Code:

--submit-stale    ignore stale jobs checks, may create more rejected shares

help you with this ?

yes "--submit-stale" param help, but my users surely don't set it and  soon they will write that my pool is scam since shows wrong hashrate

[m1n1ngP4d4w4n]

So still no solution with my problem???

Why this ccminer consider 80% of shares as stale and doesn't send them to stratum?  What job rebroadcast interval should be to avoid this problem? Or maybe another stratum setting

doesn't

Code:

--submit-stale    ignore stale jobs checks, may create more rejected shares

help you with this ?

yes "--submit-stale" param help, but my users surely don't set it and  soon they will write that my pool is scam since shows wrong hashrate

Hum i see, maybe the stratum protocol need to be revised then, weird to get this many reject.

[mirror001]

I am attempting to utilize this with Xubuntu 14.04.1, bit 3.13.0-37, nvidia driver 340.46, cuda 6.5. I have different renditions of ccminer arranged and working. I can assemble this without mistake. The issue comes when I am attempting to execute ccminer. It gives me this mistake message: "Cuda blunder in document 'blake32.cu' in line 273 : invalid gadget image.
" I get a similar sort of 'invalid gadget image' for different calculations as well. Would someone be able to please enable me to make sense of why I mama getting this mistake.

[startsts]

Finally I can fixed my stratum, sorry for annoy here, I was the only one to blame 

[Karlmaster]

Hello Guys,

i use CCminer v2.2.3 Windows - i am Mining "ETN" on that pool https://electroneum.hashvault.pro

after 10 - 20 minutes i get that fail :

unspecified launch failure cryptonight_core_cuda line 180
unspecified launch failure cryptonight_extra_cpu_final line 235

Please can fix that Problem some guy for me ?



i have 9 Times
1070 GTX OC STRIX O8G

TDP :     72%
CORE:   110
MEM:    500

get 5700-5900 H/s <-- what to mine say me, thats okay.
There are stand arround 80Watt - is that true?

Thanks for Helping