sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2015, 08:03:38 PM |
|
My toaster is pretty shiny. Also a double-wall wide four-slot with dual digital timers, click-lock pull-out crumb trays and a "bagle" button that only heats the inside elements (which is great for buns too). Be better if it were six-slice (I really like toast) but you know, whatever it's still pretty great.
Also looks like the Pi locked up on me after a while. All lights were on (no network activity, just solid LEDs), unresponsive on SSH and cgminer wasn't running. Power cycle brought it right back. I'm not too familiar with 'em, really, but is there any kind of watchdog timer to automatically reboot should that happen again? Other than that huccup, the 225MHz sticks have been running great. I should probably have been more thorough with core voltage testing (I basically raised it until I saw no errors in a two-minute sample) because errors are still higher than I'd like (HW 365, A 180K) but actually it's not terrible for what's being done.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8394
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2015, 09:44:55 PM |
|
My toaster is pretty shiny. Also a double-wall wide four-slot with dual digital timers, click-lock pull-out crumb trays and a "bagle" button that only heats the inside elements (which is great for buns too). Be better if it were six-slice (I really like toast) but you know, whatever it's still pretty great.
Also looks like the Pi locked up on me after a while. All lights were on (no network activity, just solid LEDs), unresponsive on SSH and cgminer wasn't running. Power cycle brought it right back. I'm not too familiar with 'em, really, but is there any kind of watchdog timer to automatically reboot should that happen again? Other than that huccup, the 225MHz sticks have been running great. I should probably have been more thorough with core voltage testing (I basically raised it until I saw no errors in a two-minute sample) because errors are still higher than I'd like (HW 365, A 180K) but actually it's not terrible for what's being done.
do you have a b pi with the big sdcard ? they run pretty well if you have a quality sdcard. if you are have a model using a micro card B+ and model B 2 the micro card can overheat. this sdcard linked is really good. for the model b pi http://www.amazon.com/SanDisk-Memory-SDSDUN-008G-G46-Newest-Version/dp/B00M55BS5O/ref=sr_1_2?ie=UTF8&qid=1435527858&sr=8-2&keywords=sandisk+8gbas for toaster I have white plastic with 2 big wide long slots. (sounds a little bit dirty ) but makes good toast.
|
|
|
|
cavaliersrus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 28, 2015, 11:10:28 PM |
|
i added a small 20 or 40 mm fan on my pi and its in my warm garage with my gridseeds
|
|
|
|
AJRGale
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:27:18 AM |
|
My toaster is pretty shiny. Also a double-wall wide four-slot with dual digital timers, click-lock pull-out crumb trays and a "bagle" button that only heats the inside elements (which is great for buns too). Be better if it were six-slice (I really like toast) but you know, whatever it's still pretty great.
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FF9qy6rg.gif&t=665&c=pGO-ZreODgz7tw) Also looks like the Pi locked up on me after a while. All lights were on (no network activity, just solid LEDs), unresponsive on SSH and cgminer wasn't running. Power cycle brought it right back. I'm not too familiar with 'em, really, but is there any kind of watchdog timer to automatically reboot should that happen again? Other than that huccup, the 225MHz sticks have been running great. I should probably have been more thorough with core voltage testing (I basically raised it until I saw no errors in a two-minute sample) because errors are still higher than I'd like (HW 365, A 180K) but actually it's not terrible for what's being done.
the pi's don't have any watchdog, they are just cpu+gpu+ram with io, in my little workshop when my boss setup a pi to be a webserver, he made one with reset/power and RTC and LCD output, iirc it did reset itself when it didn't respond on the I2C when it tried to pull info for the LCD then he switched it out for a simple desktop on the 2nd revision.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:47:24 AM |
|
My toaster is pretty shiny. Also a double-wall wide four-slot with dual digital timers, click-lock pull-out crumb trays and a "bagle" button that only heats the inside elements (which is great for buns too). Be better if it were six-slice (I really like toast) but you know, whatever it's still pretty great.
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FF9qy6rg.gif&t=665&c=pGO-ZreODgz7tw) Also looks like the Pi locked up on me after a while. All lights were on (no network activity, just solid LEDs), unresponsive on SSH and cgminer wasn't running. Power cycle brought it right back. I'm not too familiar with 'em, really, but is there any kind of watchdog timer to automatically reboot should that happen again? Other than that huccup, the 225MHz sticks have been running great. I should probably have been more thorough with core voltage testing (I basically raised it until I saw no errors in a two-minute sample) because errors are still higher than I'd like (HW 365, A 180K) but actually it's not terrible for what's being done.
the pi's don't have any watchdog, they are just cpu+gpu+ram with io, in my little workshop when my boss setup a pi to be a webserver, he made one with reset/power and RTC and LCD output, iirc it did reset itself when it didn't respond on the I2C when it tried to pull info for the LCD then he switched it out for a simple desktop on the 2nd revision. i think the cpu on the pi does have a built in watchdog timer.. the problem is, if the whole pi locks up, it wont count down and reset lol.. @sidehack you could make a header on the usb stick where it sends a signal to something like this? http://www.amazon.com/SwitchDoc-Labs-WatchDog-Arduino-Raspberry/dp/B00OL1N7R2it could be completely optional, but if you make it easy to wire in it would be a good add-on. if you woudlnt want to change up the usb, maybe this can be something for the typezero boards..
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:59:45 AM |
|
No, I think I'll just assume the end user might plug them into something that doesn't suck. Adding on features more-or-less designed to support a single controller is adding an extra cost that's unnecessary for anyone not using that single controller. General-purpose hardware should be general, that's why we're making it USB-tethered with a cgminer driver instead of designing for a specific controller and proprietary implementation.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:12:56 AM |
|
No, I think I'll just assume the end user might plug them into something that doesn't suck. Adding on features more-or-less designed to support a single controller is adding an extra cost that's unnecessary for anyone not using that single controller. General-purpose hardware should be general, that's why we're making it USB-tethered with a cgminer driver instead of designing for a specific controller and proprietary implementation.
makes sense.. i guess for now you can try to enable the built in watch dog timer on ther pi itself. if the pi doesnt hard lock it should work if its just cgminer crashing. https://www.domoticz.com/wiki/Setting_up_the_raspberry_pi_watchdog
|
|
|
|
Jake36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:14:04 AM |
|
Hi ALL, new to the forum.
Been reading up on the different miners and found this discussion. Looks like a good set-up to run 4-6 of them with a Pi 2, if everything falls into place with the chips, testing, manufacturing, ETC...
From the testing and review philipma1957 has done and posted, looks good enough to try 4 or 6 (depending on price) when they start selling.
I already have a R Pi 2 with cgminer 4.9.0 running, only thing I need to find is a GOOD powered USB hub.
Got this page BM to keep an eye on it.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8394
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:41:26 AM |
|
Hi ALL, new to the forum.
Been reading up on the different miners and found this discussion. Looks like a good set-up to run 4-6 of them with a Pi 2, if everything falls into place with the chips, testing, manufacturing, ETC...
From the testing and review philipma1957 has done and posted, looks good enough to try 4 or 6 (depending on price) when they start selling.
I already have a R Pi 2 with cgminer 4.9.0 running, only thing I need to find is a GOOD powered USB hub.
Got this page BM to keep an eye on it.
some where some place I link a cheap hub with 10 ports. the hub is 18 bucks at amazon. http://www.amazon.com/Etekcity-Adapter-Charging-Protector-Indicators/dp/B00ELPSEVW/ref=sr_1_3?ie=UTF8&qid=1435541857&sr=8-3&keywords=usb+hub+10+portit has a 3 amp 12 volt brick . If you look at my test thread you see I did do some testing with it. based on all the other sticks I have had . Hundreds (maybe more like 1200) the linked hub should do 4 to 6 of these sticks. If I recall your pi is the 4 port model. so you could grab two of these cheap hubs and get 4 sticks on each total 8. No need to rush. just book mark the threads.
|
|
|
|
AJRGale
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:55:14 AM |
|
No, I think I'll just assume the end user might plug them into something that doesn't suck. Adding on features more-or-less designed to support a single controller is adding an extra cost that's unnecessary for anyone not using that single controller. General-purpose hardware should be general, that's why we're making it USB-tethered with a cgminer driver instead of designing for a specific controller and proprietary implementation.
makes sense.. i guess for now you can try to enable the built in watch dog timer on ther pi itself. if the pi doesnt hard lock it should work if its just cgminer crashing. https://www.domoticz.com/wiki/Setting_up_the_raspberry_pi_watchdogWell, if i knew this earlier, setup would be somewhat cheaper.. i may have to setup my 2 pi's again.
|
|
|
|
Jake36
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 05:08:06 AM |
|
Hi ALL, new to the forum.
Been reading up on the different miners and found this discussion. Looks like a good set-up to run 4-6 of them with a Pi 2, if everything falls into place with the chips, testing, manufacturing, ETC...
From the testing and review philipma1957 has done and posted, looks good enough to try 4 or 6 (depending on price) when they start selling.
I already have a R Pi 2 with cgminer 4.9.0 running, only thing I need to find is a GOOD powered USB hub.
Got this page BM to keep an eye on it.
some where some place I link a cheap hub with 10 ports. the hub is 18 bucks at amazon. http://www.amazon.com/Etekcity-Adapter-Charging-Protector-Indicators/dp/B00ELPSEVW/ref=sr_1_3?ie=UTF8&qid=1435541857&sr=8-3&keywords=usb+hub+10+portit has a 3 amp 12 volt brick . If you look at my test thread you see I did do some testing with it. based on all the other sticks I have had . Hundreds (maybe more like 1200) the linked hub should do 4 to 6 of these sticks. If I recall your pi is the 4 port model. so you could grab two of these cheap hubs and get 4 sticks on each total 8. No need to rush. just book mark the threads. Thanks, already booked marked. Yes, the Pi 2 has 4 ports and as long as those hubs don't back feed any current to the Pi they should work, Pi's are picky about that. HMM, 2 hub's for 8, something to think about.
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 10:39:53 AM |
|
Come on, guys, I am almost ready to buy 42 of that sticks (probably even 49 - not sure whether we have 6 or 7 7-port USB hubs) on approbation. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 11:04:16 AM |
|
Come on, guys, I am almost ready to buy 42 of that sticks (probably even 49 - not sure whether we have 6 or 7 7-port USB hubs) on approbation. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Sheesh....I don't want to be behind you in line..I just want ONE at least (need the bitcoin miner am an addict...to the pretty LCD's) ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (bumps ahead in the line of the guy in previous post ....less he buy them ALL!)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 11:33:43 AM |
|
Ain't those sticks looks good? ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 11:38:41 AM |
|
They looks awesome! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
wh00per
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:24:12 PM |
|
I hate hubs with power buttons. It seems you'd need to be near them and press those buttons at any power cycle.
Sorry, but I'd won't buy those, no matter what power brick comes with them. The D-Link were/are way better.
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:30:17 PM |
|
If it's a push-on push-off switch, just leave it on.
Also, buying 40 sticks will cost you $1000 in sticks. Sure it'll look sexy as all get-out but you could buy a couple terahash worth of gear for that. I'm only planning on making 600 (unless there's a lot of demand and still-available chips, then we'll see) and German guy is fetching 800 chips so he might build that many.
Also, Bitmain got back to me and advised me to wait on paying until they could re-verify the chip availability since it's been two weeks. Grumble grumble. Hopefully there are no problems.
|
|
|
|
TheRealSteve
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 12:50:23 PM |
|
German guy is fetching 800 chips so he might build that many.
Unless Amita is still on and he'd plan on building a few of those as well? Also, Bitmain got back to me and advised me to wait on paying until they could re-verify the chip availability since it's been two weeks. Grumble grumble. Hopefully there are no problems. This project's pretty decent positive PR for them. Here's to hoping they don't make the same mistake (imho) in thinking as BitFury.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8394
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:46:55 PM |
|
German guy is fetching 800 chips so he might build that many.
Unless Amita is still on and he'd plan on building a few of those as well? Also, Bitmain got back to me and advised me to wait on paying until they could re-verify the chip availability since it's been two weeks. Grumble grumble. Hopefully there are no problems. This project's pretty decent positive PR for them. Here's to hoping they don't make the same mistake (imho) in thinking as BitFury. Yeah it is not like sidehack is building 100,000 sticks. Right now bitmaintech's chip is the best chip in the world and sidehack's usb stick is the most efficient miner in the world. If I were to resell on ebay my headline would be. Antminer's best chip from the S-5 now comes in a USB Stick.Copy: Antminer's built BTC miners in China have long been the gold standard. On a special sale of s-5 chips my supplier has reworked those same chips into USB sticks. These sticks use .333 watts a gh. Please See the link for the official review thread of these sticks: https://bitcointalk.org/index.php?topic=1086011.0;allBe one of the few people in the world to own a piece of Chinese-Amercian mining design. Only 600 of these in the world. Out of two heartlands One in China where the chips were forged One in Missouri where the stick was designed and built. I don't have a lot of them and I will include a software card with them so you can mine with your (fill in the blank) The advert above would be true and makes China and America look cool. Well at least bitmaintech and Sidehack will look cool. And I would not post this in this thread and then list it differently. I really want to get a few hundred new people into this via ebay. The ad would be approved by sidehack and Novac. It would be designed to show the good side of BTC. Different people across the world getting along and doing something decent.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 29, 2015, 01:58:30 PM |
|
To save me trouble I'll probably end up just selling on the forums here. I reckon if someone else wants to list on eBay that's fine with me, but you'll have to remember there's no bulk discounts.
If the first 600 sell out super fast, I'll definitely look into a second batch. It's going to depend pretty heavily on chip sourcing though.
|
|
|
|
|