Freak.
Just when we get some updates from BA, PG hogs up the page again.
Thanks alot, spammer!
Why don't you find something big and rough and stick it up your ass, while I continue to expose the characters that Black Arrow opts to surround themselves with. BTW, fuckface, I did the same thing on Hashfast's thread, and look where they are now. Perhaps, you even ordered from AMT. PG, man do I like this guy's spunk! (pun intended)  I'll give you one thing, you're definitely persistent and diligent in your detective work, no matter how aimless and pointless it is. A true "dick"!  So, would you go on record, right here, right now, and state that Matt Carson's warehouse story is correct and mine is a falsehood? I don't care if Matt Carson jacks off into a sock in Missouri or Colorado, as long as these miners ship from somewhere. People obviously ordered equipment from Minersouce or Matt Carson as you like to call him (Antminers), not sure what point you're trying to make. So, Matt Carson paid $10,000 for Miner Source to be a Bronze Sponsor at the Austin conference next week, eh. We already know he'll proudly be displaying Black Arrow's banner in his booth. Not bad for a hookah-token lying piece of shit. |
|
|
|
Freak.
Just when we get some updates from BA, PG hogs up the page again.
Thanks alot, spammer!
Why don't you find something big and rough and stick it up your ass, while I continue to expose the characters that Black Arrow opts to surround themselves with. BTW, fuckface, I did the same thing on Hashfast's thread, and look where they are now. Perhaps, you even ordered from AMT. PG, man do I like this guy's spunk! (pun intended) I'll give you one thing, you're definitely persistent and diligent in your detective work, no matter how aimless and pointless it is. A true "dick"! So, would you go on record, right here, right now, and state that Matt Carson's warehouse story is correct and mine is a falsehood? I don't care if Matt Carson jacks off into a sock in Missouri or Colorado, as long as these miners ship from somewhere. People obviously ordered equipment from Minersouce or Matt Carson as you like to call him (Antminers), not sure what point you're trying to make. The point I'm trying to make is that Matt Carson is a liar. Let's revisit Black Arrow's first trustworthy reseller, shall we? From the desk of Bobsag3, a.k.a. Matt Carson, Black Arrow's first and #1 reseller for their miners.
<snip>
I never ended up moving to another warehouse in Rolla, just the one. We went right from small warehouse in rolla > denver warehouse in one move, early Jan.
We paid for every month, and if your in contact with who you should be to verify that kind of info, they will verify it. So yes, your blowing smoke up peoples asses.
And with that im done on the subject. I think people have seen im more than up front compared to most here- but lets stay on topic about BA, or about actual minersource orders.
Timeline of Matt Carson's datacenter locations. Originally posted in Black Arrow's self-moderated thread, but quickly deleted for being...wait for it..off-topic (and that I was trolling, so they claim). Black Arrow has proof that Matt Carson can NOT be trusted, but continue to use him as their official reseller in the US. If I were to use Tom Williams, of mybitcoin.com, as my official reseller for some product, stating that people change, would I be able to sell many product, Alex Sovu, of cardreaderfactory.com? Me, the asshole, no think so, yet... BUILDING #1: Purchased the building, awaiting infrastructure. Building was purchased today!
All the wiring and infrastructure equipment arrives tomorrow-Wednesday. Over 400lb. Poor UPS man
<snip>
Thanks- Ill be moving to a custom made facility here in under 3 weeks.
BUILDING #2: Moving to a better facility here (still in Missouri) located 90 miles away. Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Building acquired  I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation Yeah I can do that. *might* be able to live stream, or atleast upload a ton of pictures. I will be shipping from MO. Middle of the country, and if your anywhere close to me Im ok with local pickup . And I just want to say guys - Barn has been working very hard behind the screens to bring this all together... this stuff is immensely complex.
<snip>
This is why I went from garage > warehouse > bigger warehouse. Heat is nuts.
Shenzhen, China 11/26/2013 8:05 P.M. Departure Scan
Yea, but do the thumbs have any tracking info? When you get the board delivery after a quick run though where are they coming from for you. I seem to expect California. No idea on the thumbs- thats all Barn. I will be shipping out from Central MO.Does anyone have any details regarding power consumption. The genesis block calculator says expected power usage per unit to be 2100 watts. I am afraid for me that's not going to work. To be honest I was expecting something that would work on a residential 120v circuit. They also do not offer any hosting yet unfortunately.
I got ya covered  But yeah that is kind of silly. Im glad when I put my new facility together I decided to say fuck it and got all 240vNovember 26th, edited on the 28th, Matt Carson is still in Missouri at the second facility: https://bitcointalk.org/index.php?topic=347732.msg3723600#msg3723600bobsag3: Vetted Co-op member. World's lowest hosting fees for vetted miner hosting at a professional colocation hosting facility in Missouri! Official Black Arrow US Reseller and US Distributor for Drillbit Systems. New Pres. of our Mining Operations arm of our LLC. Providing R19 and R19B miners to the GB Forum! And still upgrading his second facility:
<snip>
No problem. Im having a 400A 240V pannel installed just for the 2kw+ miners that seem to be coming out.
On December 12, 2013, fresh back from China, Matt Carson posted the following... BTW, still located in Missiouri:This makes no sense financially and if it's going to be hosted in a data center it should be using specialized GPU mining racks that can run more GPUs per motherboard/CPU. You really need open racks and to use PCI-E riser ribbons if you want to build a GPU mining rig, using a desktop computer case makes no sense especially because heat is a huge issue with scrypt mining. Also to be honest, scrypt mining is VERY finicky compared to SHA256 mining, you're talking about constant lockups and crashes if heat isn't perfectly controlled. The amount of time that's going to go into keeping everything running is going to be much higher than with bitcoins and given how the Bitfury towers already caused a ton of problems I'm not sure the coop has enough manpower to keep racks of scrypt miners up and running.
The new facility comes with me also having hired 6 more people to help out. I am currently training them right now.
<snip>
I am working with them right now for me to help with their tickets, so we can get the response time much faster. I have hired additional staff that start work here in a few weeks, and I know they are working hard to improve their systems.
I cant speak on the refunds unfortunately, I am still discussing the options with them.
Four hours later, Matt mentions for the first the move to Denver, right after somebody ask about local pickup since he lives in KC. Did his new hires move to Denver with him?We will offer local pickups- but we are moving to a massive new facility in CO, so pickups will have to be from there . ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you. We are all moved into the new place, lots of updates and pictures to come!
BUILDING #3:Somewhere in Colorado, in some warehouse with 16-18 foot ceilings, ideally well-suited for bitcoin miners that love fiberglass dust sourced from the exposed insulation in the ceilings and walls, blown free from the constantly moving vortex of air due to the industrial-sized air conditioning unit(s). Whatever you do, don't open up that massive overhead door that's probably not well-sealed, otherwise you'll really have the dust a flying. This has been the third time you're on record in stating that you only moved once. Care to try for a forth time? ~TMI BTCITW |
|
|
|
In looking at those pages, there are some similarities for sure, but I'd bet it's because they use the same CMS. If you view the page source you can see the exact same error strings, code structure and so forth. However, I'd guess this is most likely due to CMS than same company.
I'd say the main factor against this being a scam is that Bobsag3 went there and met the guys running Black Arrow. There are pics and video of loads of BitFury boards and at least one prototype of the Prospero (I think).
Also it looks like the scam cardreader company was in Romania, so doesn't really fit with this Chinese company.
Last, as jimmothy says, they seem to have shipped product. I'd guess (hope!) it's just the CMS.
Hey, Tinker Bell! You missed the memo from Black Arrow proving that they're the same company, and that Alex Sovu works at both of them, even to the point where all bank wires to Black Arrow where directed to a bank account owned by Alex Sovu. It's a shame that I'm on ignore, for next time I discredit another ASIC-based Bitcoin miner company that you'll suck dick for, you'll miss them posts also. |
|
|
|
Freak.
Just when we get some updates from BA, PG hogs up the page again.
Thanks alot, spammer!
Why don't you find something big and rough and stick it up your ass, while I continue to expose the characters that Black Arrow opts to surround themselves with. BTW, fuckface, I did the same thing on Hashfast's thread, and look where they are now. Perhaps, you even ordered from AMT. PG, man do I like this guy's spunk! (pun intended) I'll give you one thing, you're definitely persistent and diligent in your detective work, no matter how aimless and pointless it is. A true "dick"! So, would you go on record, right here, right now, and state that Matt Carson's warehouse story is correct and mine is a falsehood? |
|
|
|
Aaaaand, PG back on ignore. Every once in a while I have to peek, then my eyes start bleeding and I regret it.
Matt, I'm here in Colorado, just north of Denver and am a developer. PM if you want another set of eyes on the database.
I'd also like to arrange pickup once the machines come in.
Breaks my heart, Show-Me-State/Mile-HIGH-City-State dude. Also, have you preordered it yet? I'm trying to preorder it and the website is saying they don't ship to the US. I'm not able to complete the checkout due to the shipping address I entered.
Yes, but I ordered from MinerSource.net. They're located not far from me in St. Louis. Name: TinkerTom
Posts: 42
Activity: 42
Position: Jr. Member
Date Registered: December 10, 2013, 03:13:57 PM
Last Active: Today at 06:09:51 PM
ICQ:
AIM:
MSN:
YIM:
Email: hidden
Website:
Current Status: Offline Offline
Bitcoin address: 1D52Dta6KaA79qWEkaW3EdovV65EGhVY1C
Gender: Male
Age: 52
Location: Colorado, USA
Local Time: February 26, 2014, 06:44:31 PM
Language:
Trust: 0: -0 / +0(0) Did you have your dick up Matt Carson's ass during the entire road trip when you moved, Tinker Bell? Username TinkerTom
Seller MinerSource
Order Number 97x
Payment Date 12/11/2013
Payment Type Wire
Type X3
Quantity 2
Destination (Country) USA
Date Received
So, on Dec. 11, 2013, you didn't live that far from Matt Carson's operation, since both of you were living in Missouri at the time, but you opted to send a bank wire to his scammy ass, oppose to via Bitcoin or driving over to his warehouse and giving him cash (nonreversible like Bitcoin or a bank wire) over a hookah session. It's a shame that I'm on ignore, for you'll never be able to read that I don't trust your fuckin' ass either, you piece of shit. BTW, I have nobody on ignore, for I don't play pussy games like that. (apologies to my friends who play such pussy games) |
|
|
|
Freak.
Just when we get some updates from BA, PG hogs up the page again.
Thanks alot, spammer!
Why don't you find something big and rough and stick it up your ass, while I continue to expose the characters that Black Arrow opts to surround themselves with. BTW, fuckface, I did the same thing on Hashfast's thread, and look where they are now. Perhaps, you even ordered from AMT. |
|
|
|
Please refund my R17 order #654 of 0.80148582 BTC. If you could get this refund in the next batch I would appreciate it, but I understand that this might not be possible with the latest patch.
Below is a signed message from the sending address of 1Bez3S1nTKmK4zT8TEPb4dnyYdx3j34Q38. Please let me know if you need anything else.
Message:
bcabes refund request for Round 17 Order #654 for 0.80148582 BTC.
Signature:
G9Ah1RjJjyciOJcESYMJC6xitgcUQnmb006zKA73lX4Z+2kFj1SjrwuEzn5syOohrjUrQZzkt3KR4PGFuvMgMkc=
PM also sent bobsag. Thanks again for all that you do. I just decided that I did not want to wait any longer.
Nice post we have here. From you to Matt Carson: https://blockchain.info/tx/5c6690d973e2f3fb3bb6ac76974e4e872818fddb66ba7f1b7f5fe9e158e39437Matt Carson to Matt Carson to Coinbase: https://blockchain.info/tx/1133ef4cbdcef5187c805c2f5e52646d304fd56d1cdd7b0839d7243058c7deacFor the life of me, I don't see nothing going to anything resembling Black Arrow. Hey, Matty Boy! Would you be so kind as to point out which one of them addresses was supposed to be Black Arrow's to pay for bcabes' miner, acting as the official vetted US reseller? BTW, we know it ain't this one https://blockchain.info/address/1AujZB4GuL7EueGDVBAb6Qc4nweaKoED3c, for that's the one you donated from to Sean's Outpost via my Mega Thread. FYI, I wouldn't even be in this thread now if three people hadn't PM/emailed me expressing a concern, all linking to one of the latest posts. I'll tell you what, bud. It must be terrible being you right about now with so many people bailing on your scammy ass, along with possibly your other product line  getting low, if you know what I mean, bud. |
|
|
|
Hi,  so yesterday I logged in to my multipool account. I saw that from 2 past days, my payouts were going to a different address rather than my own doge address. I looked in it and saw that my address was changed  Well, I copied that address(D5mRXNc8MWWoB3nGDpRx5Eea6DJEax46zr) and checked the blockchain, he probably stole from a lot of other people too. I decided to look for the address on google. I found this thread. https://bitcointalk.org/index.php?topic=418930.msg4549338#msg4549338Already did that, username: Cryptoman. D5mRXNc8MWWoB3nGDpRx5Eea6DJEax46zr JJPasak post this^ comment on a etoken giveaway, where he listed a doge address apparently, because a etoken address starts with an e. Correct me if I am wrong. That being said, I guess the JJPasak guy is a coin stealer and a possible scammer and threat. Please do not deal with him. and be ware out there. If anyone feels generous please send me some doge to help the poor shibe  My doge address:DJf5DN79G7PfZKkpqHYRSMVkBfV7KtkhUg Anyone wants screenshots. I will provide, thank you Here's the screenshot, and it looks like he deleted said post prior to the 22nd according to Google Cache.  To me, this looks like a criminal investigation, and theymos should be providing IP records to the authorities. |
|
|
|
Anyone who used them after 2011 is either mentally challenged or a masochist.
I once dated a mentally challenged masochist, and have the teeth MARKS to prove it. To this day, I can't get her KARP-smelling cunt outta my mind. |
|
|
|
|
Would you like a bacon sandwich?
|
|
|
|
Just posting to boost my post count, nothing to see here.
It's people like you that make me sick.  |
|
|
|
As we have said, we are rapidly trying to improve our CS, and customer input is crucial to that processes (As I have tried to inform BA).
I hope our new ticket system is working well, as well as our much faster and prompt responses via FB.
With two Matts taking care of support tickets and maintaining Black Arrow's Facebook page, all concerns should probably be addressed in a timely manner. We will offer local pickups- but we are moving to a massive new facility in CO, so pickups will have to be from there . ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you. Hi Everybody,
There's no referral program in place at the moment.
There will be an option for local pick-up.
I'm going to do my best to stay up to date with this thread. I'm also running the facebook page and answering tickets.
Also, to address Carlton Banks, there is no conspiracy to maximize profits. 90% of our team is focusing on the engineering side of things to make sure we get this ready for Feb 2014. Our customer service team is trying to keep up with orders and questions as well as we can.
Having said that, if anyone has emailed us and is still waiting for a reply, please PM me your question.
If you want to verify that I work for Black Arrow, please PM me and I will supply my @blackarrowsoftware.com email address.
Thanks!
Matt
Minersource facebook page: https://www.facebook.com/minersourceBlackarrow Facbook page: https://www.facebook.com/pages/Black-Arrow/477655819009178I'm definitely working on a status update. I'm the guy on facebook, in the ticket system, here, and on ecointalk. It's hard for me to keep up with all of these different places where people often times ask the same or similar questions.
I should have an update soon.
I will look into my PM's here too.
Color me (pun may or may not be intended) confused, but I clearly shown that you, Matt Carson, have assess to Black Arrow's support tickets, yet BlackArrow Matt states that he's the guy solely filling that role. If such wasn't the case, BA Matt would have clarified that position. Are we both not aloud to have access to the tickets? I need to be able to see the tickets in their system that have to deal with Minersource, and that BA Matt needs assess to the tickets because he works for Black Arrow? <highlighted text reintroduced, for it somehow keeps getting edited out--must be a glitch> First off, college grad, it's "allowed" and not "aloud", at the least the third time you've made that error even after it was brought to your attention prior. Yes, you're allowed! No problem there whatsoever. But, BlackArrow Matt posted... I'm the guy on facebook, in the ticket system, here, and on ecointalk. Ergo, anybody reading only that post would safely assume that only BlackArrow Matt, a representative of Black Arrow, would have assess to any sensitive information submitted. Not something that would be seen by a proven lying hookah toker like yourself. Let's revisit Black Arrow's first trustworthy reseller, shall we? From the desk of Bobsag3, a.k.a. Matt Carson, Black Arrow's first and #1 reseller for their miners.
<snip>
I never ended up moving to another warehouse in Rolla, just the one. We went right from small warehouse in rolla > denver warehouse in one move, early Jan.
We paid for every month, and if your in contact with who you should be to verify that kind of info, they will verify it. So yes, your blowing smoke up peoples asses.
And with that im done on the subject. I think people have seen im more than up front compared to most here- but lets stay on topic about BA, or about actual minersource orders.
Timeline of Matt Carson's datacenter locations. Originally posted in Black Arrow's self-moderated thread, but quickly deleted for being...wait for it..off-topic (and that I was trolling, so they claim). Black Arrow has proof that Matt Carson can NOT be trusted, but continue to use him as their official reseller in the US. If I were to use Tom Williams, of mybitcoin.com, as my official reseller for some product, stating that people change, would I be able to sell many product, Alex Sovu, of cardreaderfactory.com? Me, the asshole, no think so, yet... BUILDING #1: Purchased the building, awaiting infrastructure. Building was purchased today!
All the wiring and infrastructure equipment arrives tomorrow-Wednesday. Over 400lb. Poor UPS man
<snip>
Thanks- Ill be moving to a custom made facility here in under 3 weeks.
BUILDING #2: Moving to a better facility here (still in Missouri) located 90 miles away. Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Building acquired I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation Yeah I can do that. *might* be able to live stream, or atleast upload a ton of pictures. I will be shipping from MO. Middle of the country, and if your anywhere close to me Im ok with local pickup . And I just want to say guys - Barn has been working very hard behind the screens to bring this all together... this stuff is immensely complex.
<snip>
This is why I went from garage > warehouse > bigger warehouse. Heat is nuts.
Shenzhen, China 11/26/2013 8:05 P.M. Departure Scan
Yea, but do the thumbs have any tracking info? When you get the board delivery after a quick run though where are they coming from for you. I seem to expect California. No idea on the thumbs- thats all Barn. I will be shipping out from Central MO.Does anyone have any details regarding power consumption. The genesis block calculator says expected power usage per unit to be 2100 watts. I am afraid for me that's not going to work. To be honest I was expecting something that would work on a residential 120v circuit. They also do not offer any hosting yet unfortunately.
I got ya covered But yeah that is kind of silly. Im glad when I put my new facility together I decided to say fuck it and got all 240vNovember 26th, edited on the 28th, Matt Carson is still in Missouri at the second facility: https://bitcointalk.org/index.php?topic=347732.msg3723600#msg3723600bobsag3: Vetted Co-op member. World's lowest hosting fees for vetted miner hosting at a professional colocation hosting facility in Missouri! Official Black Arrow US Reseller and US Distributor for Drillbit Systems. New Pres. of our Mining Operations arm of our LLC. Providing R19 and R19B miners to the GB Forum! And still upgrading his second facility:
<snip>
No problem. Im having a 400A 240V pannel installed just for the 2kw+ miners that seem to be coming out.
On December 12, 2013, fresh back from China, Matt Carson posted the following... BTW, still located in Missiouri:This makes no sense financially and if it's going to be hosted in a data center it should be using specialized GPU mining racks that can run more GPUs per motherboard/CPU. You really need open racks and to use PCI-E riser ribbons if you want to build a GPU mining rig, using a desktop computer case makes no sense especially because heat is a huge issue with scrypt mining. Also to be honest, scrypt mining is VERY finicky compared to SHA256 mining, you're talking about constant lockups and crashes if heat isn't perfectly controlled. The amount of time that's going to go into keeping everything running is going to be much higher than with bitcoins and given how the Bitfury towers already caused a ton of problems I'm not sure the coop has enough manpower to keep racks of scrypt miners up and running.
The new facility comes with me also having hired 6 more people to help out. I am currently training them right now.
<snip>
I am working with them right now for me to help with their tickets, so we can get the response time much faster. I have hired additional staff that start work here in a few weeks, and I know they are working hard to improve their systems.
I cant speak on the refunds unfortunately, I am still discussing the options with them.
Four hours later, Matt mentions for the first the move to Denver, right after somebody ask about local pickup since he lives in KC. Did his new hires move to Denver with him?We will offer local pickups- but we are moving to a massive new facility in CO, so pickups will have to be from there . ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you. We are all moved into the new place, lots of updates and pictures to come!
BUILDING #3:Somewhere in Colorado, in some warehouse with 16-18 foot ceilings, ideally well-suited for bitcoin miners that love fiberglass dust sourced from the exposed insulation in the ceilings and walls, blown free from the constantly moving vortex of air due to the industrial-sized air conditioning unit(s). Whatever you do, don't open up that massive overhead door that's probably not well-sealed, otherwise you'll really have the dust a flying. This has been the third time you're on record in stating that you only moved once. Care to try for a forth time? ~TMI BTCITW |
|
|
|
As we have said, we are rapidly trying to improve our CS, and customer input is crucial to that processes (As I have tried to inform BA).
I hope our new ticket system is working well, as well as our much faster and prompt responses via FB.
With two Matts taking care of support tickets and maintaining Black Arrow's Facebook page, all concerns should probably be addressed in a timely manner. We will offer local pickups- but we are moving to a massive new facility in CO, so pickups will have to be from there . ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you. Hi Everybody,
There's no referral program in place at the moment.
There will be an option for local pick-up.
I'm going to do my best to stay up to date with this thread. I'm also running the facebook page and answering tickets.
Also, to address Carlton Banks, there is no conspiracy to maximize profits. 90% of our team is focusing on the engineering side of things to make sure we get this ready for Feb 2014. Our customer service team is trying to keep up with orders and questions as well as we can.
Having said that, if anyone has emailed us and is still waiting for a reply, please PM me your question.
If you want to verify that I work for Black Arrow, please PM me and I will supply my @blackarrowsoftware.com email address.
Thanks!
Matt
Minersource facebook page: https://www.facebook.com/minersourceBlackarrow Facbook page: https://www.facebook.com/pages/Black-Arrow/477655819009178I'm definitely working on a status update. I'm the guy on facebook, in the ticket system, here, and on ecointalk. It's hard for me to keep up with all of these different places where people often times ask the same or similar questions.
I should have an update soon.
I will look into my PM's here too.
Color me (pun may or may not be intended) confused, but I clearly shown that you, Matt Carson, have assess to Black Arrow's support tickets, yet BlackArrow Matt states that he's the guy solely filling that role. If such wasn't the case, BA Matt would have clarified that position. BTW, you accidently (MY ASS) un-highlighted a phrase in the post you quoted penned by me. I hope you don't mine me re-highlighting it. |
|
|
|
As we have said, we are rapidly trying to improve our CS, and customer input is crucial to that processes (As I have tried to inform BA).
I hope our new ticket system is working well, as well as our much faster and prompt responses via FB.
With two Matts taking care of support tickets and maintaining Black Arrow's Facebook page, all concerns should probably be addressed in a timely manner. We will offer local pickups- but we are moving to a massive new facility in CO, so pickups will have to be from there . ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you. Hi Everybody,
There's no referral program in place at the moment.
There will be an option for local pick-up.
I'm going to do my best to stay up to date with this thread. I'm also running the facebook page and answering tickets.
Also, to address Carlton Banks, there is no conspiracy to maximize profits. 90% of our team is focusing on the engineering side of things to make sure we get this ready for Feb 2014. Our customer service team is trying to keep up with orders and questions as well as we can.
Having said that, if anyone has emailed us and is still waiting for a reply, please PM me your question.
If you want to verify that I work for Black Arrow, please PM me and I will supply my @blackarrowsoftware.com email address.
Thanks!
Matt
|
|
|
|
I'm aware that it's not a box, PCBs, chips all mashed together with duct tape.
I'm attempting to hunt down their vendors in order to see if they are even attempting to make production happen.
Now I don't know if they are also assembling them "in house" or if they are getting a more capable entity to do that for them. That's what I'm wondering.
It does them squat to have components and not ship, as that is a big investment of their money. At least considering that by the time I ordered they had chips in hand based on the GPS evidence.
I'm just waiting to see what comes of it all. If I get a product in the time frame I ordered it for great but I have 1 month plus a few days in that time frame. I'll be keeping an eye here to see if anyone receives tracking numbers before I head in and check it out my self.
If I can get a bead in on any other vendors they might be using for production I'll be making similar calls.
Dude, Hunt down their brain capacity first. This is the only thing that matters. You can not measure it by GPS, pics and shit. You are the one to judge. Just my 2 cents I was out of the electronics loop for a long time. 20 odd years ago I could work miracles with a soldering iron. But I don't know jack about SMT and the like, so I can't judge. But Jim at AMT seems to be the right guy for that sort of thing. This isn't a defense of their business practices, just an observation. He's a bright guy, but I haven't the modern knowledge to know HOW bright. If they really are designing their own, He is who I would think is doing it. Jim You are joking right? Any way i am not arguing with you. He is a bright guy for sure the brightest one using duck tape (my post was edited before your quote) I hope not. Frankly I'd like to wash my hands of this whole debacle, but I'd also like to see everyone made whole. As for the duct tape... I'm a redneck intellectual. Don't be disrespecting duct tape! There are three essential items in every tool box. Duct tape, WD-40, and JB weld. If it moves and it shouldn't, use duct tape. If it doesn't move and it should, use WD-40. If it moves, shouldn't, and needs to be solid, use JBWeld! ...don't shoot, I think we all need a little humour at this juncture. Humour, eh! Since when did a lazy redneck born and raised in the US decide to start exerting extra keystrokes to spell out non US English words? Later, bud. BTW, just fuckin' with you, and love your recent family addition. Personally, I would have given her the middle name B. Just the letter B sans a period. Ironically, that's exactly what my daughter's middle name is--"B"--born April 1, 1979. I'd leave it to the sleuths in discovering her real first name, albeit I already penned its alternate spelling. ~TMI BTCITW |
|
|
|
You got that right. Anyway he won this round, I'll tell you that. We'll see who will win the next one.
MtGox owner? there is no next round, he ran away with the money.. Karp-o-Funnel comes to mind, Mark my word. |
|
|
|
seriously there's no way in hell the actual transaction is worth three hundred million Earth dollars
it'll be some sort of mob deal, and it'll make sense at that level, and we'll never know
It could simply change hands for an undisclosed amount equally to or greater than tree-fitty. |
|
|
|
Dutchman Paul Buitink from debitcoin.org tweets: "Just heard from a source close to the potential investors that the @twobitidiot document is authentic. 3 companies now bidding on @MtGox" https://twitter.com/paulbuitinkSays he will update when further info available. BitPay Memory Dealers Dream Host Mayzus That's my four guesses. I have a hunch that the latter will win. Yep! Definitely Mayzus. The following release was on Gox's site, albeit altered, prior to it going dark. The following can still be seen on their FB page as their last entry. http://www.cryptocoinsnews.com/2013/12/19/mt-gox-fee-discount/Press Release by Mt. Gox: 25% fee discount and improved deposit speed
David Parker 19/12/2013 Bitcoin, Mt. Gox, News, Press Releases
Posted 2 months ago
TOKYO – JAPAN – December 19, 2013
Dear MtGox Customers,Thank you for your patience and support all throughout 2013.
As we noted in our previous update there are many things happening, and we’re proud to announce two more major developments that will make MtGox both easier and more economical for our valued customers:
- Special fee discounts for the winter holidays to celebrate reaching one million customers.
- A new partnership with payment provider Mayzus Financial Services
1) One million MtGox customers and reduced fees for the holidays!
Thanks to our loyal customer and increased global interest in Bitcoin, MtGox has now achieved a milestone of over one million customers and growing.
This is an incredible moment for us all, and to celebrate, we are offering a Special Holiday Discount of 25% off all trading fees starting today, December 20th 2013 to January 20th 2014!*
2) Mayzus Partnership
We are proud to announce a new partnership with Mayzus that will enable our customers outside of the United States to deposit quickly and without long processing times.
Now that we are working with Mayzus, a leading financial company that is in-tune with the future of Bitcoin, anyone with a verified account will be able to quickly send money to their MtGox account via 126 global currencies.
For more information about methods accepted on Mayzus, please refer to this link: https://www.mayzus.com/en/deposit-withdrawal.html
Mayzus FAQ:
Q: It’s great that deposits are fast, but what about withdrawals?
A: Withdrawals are coming with Mayzus, but not just yet. Phase One is enabling deposits, and Phase Two will be deeper integration with Mayzus that creates a better experience and allows for withdrawals as well.
Q: I’m in the United States. What about me?
A: We are not ignoring you. We have been working hard to improve the withdrawal process as well.
Q: How do we get started?
A: first you will need to have a verified account with Mayzus. If you don’t have one already you can create one here: https://secure.moneypolo.com/registration
Once verified, you will be able to deposit within the “Funding Options” menu on the MtGox dashboard. Choose “Mayzus” from the drop-down menu and follow the simple steps.
3) Additional Note:
Don’t forget to secure your account with a one-time password solution such as Google Authenticator or the MtGox Yubikey or OTP Card solutions.
Look for more information in the security center when you login to your MtGox account.
Thank you again for your support,
*The Special Holiday Discount of 25 % will be applied for any trade issued from December 20th 2013 (00h00 GMT) to January 20th 2014 (23h59 GMT).
Regards
Mt.Gox Co. Ltd Team.  |
|
|
|
Dutchman Paul Buitink from debitcoin.org tweets: "Just heard from a source close to the potential investors that the @twobitidiot document is authentic. 3 companies now bidding on @MtGox" https://twitter.com/paulbuitinkSays he will update when further info available. BitPay Memory Dealers Dream Host Mayzus That's my four guesses. I have a hunch that the latter will win. |
|
|
|
|
Show Posts
