I goggled it and found this : not sure if it will help you .  


"Ethminer works just fine as well as Claymore's v1.2. I just set a single 16GB pagefile and tried launching v4.1 and it returned the following error: GPU 0, OpenCL error -4 - cannot create DAG.

@Claymore"

"v3.3 takes may be 10-20 more GPU memory, that's the only difference between previous versions. You even did not mention what cards are used, how much RAM etc.

I'm clueless as to why all versions excluding v1.2 fail to create a big buffer despite the fact that they were previously working prior to updating to v3.3. I did mention that the rig in question is seated with a Hawaii-based GPU, more precisely a reference Sapphire 290x operating on Windows 7 x64, Intel Pentium D w/ 2 x 2GB RAM although only 3.25 GB are usable. I can send you my log along with any other information deem it necessary.

Thanks for the quick reply!

Why only 3.25GB are usable?

3.25 only because of WIN 7

That is true only to Windows 7 32-bit but as I'm using the 64 bit-one, I'm almost certain it's due to my motherboard's chipset."

and this

https://bitcointalk.org/index.php?topic=1433925.5040

submit

I usually get them ....it can take time.. I'm waiting for 180 bucks in rebates, i should start getting them this month from as far back as March this year they didn't offer Me the fast way like it says for a fee, so it takes at least 8 weeks or more to get them, Ive been watching they should starting coming some time this month ..all the rebates i turned were approved ..


IN past buys only two times I didn't get the rebate that i can remember one was the rebate company was a ripe off and one time on a mother board I  turned in the wrong stuff or Submitted it wrong but was told to  resubmitted it and got it .

There may have been one or two more i didn't get by my mistake other wise i get them ....

yea there is but you have to re flash the card with modded bios that card can hit 27 MH or higher with a tweaked/modded bios....

This gives just about all you need to know about flashing AMD cards with software links and any needed links.

https://anorak.tech/t/how-to-flash-a-amd-graphic-card-vbios/15

once you find out what card that is then go here https://anorak.tech/c/downloads

you may need to start a account . once you know your card, you want the bios that matches your card with memshift in the bios name,  you can see what your cards memory is by using this https://www.techpowerup.com/download/techpowerup-gpu-z/ then flash it and patch the AMD driver with this https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher that's all you need after you install the driver, then your set . other thing unless it's set in the bios you have to set the memory clocked like 1900 MNZ and lower the core clock to 1100 to 1180 that should hit like 27 Mh for ETH mining .. with http://www.guru3d.com/files-details/msi-afterburner-beta-download.html .....  or what ever OC software you like to use .

last thought you can mine any alt coin GPU's can mine with any of those bios but will have to use after burner or some kind of over clock software and if you set up the bios just for eth Mining that coin might be all that card can do at a good speed ,I flashed mine with new memory settings and messed with some of the power setting but left the clocks alone in the bios, so i can use it with any coin, then overclock for ETH and ZEC as needed ,that way works fine for me ...

My AMD cards run at 27 to 29 MH depends which card and how much memory each card has for ETH and for ZEC they may hit 315 KH/Sol or a little lower for ZEC /Zcash mining . when you OC you have to find out the limits of that card the rest is fun ....

PS :< forgot i also use this software  it is really nice ... http://www.awesomeminer.com/ even the free version but after you use it while you will more then likely want more of the stuff unlocked ..but have to pay but it was worth it to me and so far that's a one time charge you get a lot and lots updates to keep it going with new stuff added for your unlock level at no charge, so far ....


Oyea I'm also mining ZENCASH but gonna try and hold on to them for a while, Ive made like 20 bucks mining them for over a week and a half ,with my little ten card farm sense, i can't find any more rx 400 or 500 at a good price why  not save for a 1080 ti that cost a little more then some of the RX 570 on sell now .

one of my PC  is used both for mining and playing wow, no hang ups  ... i think I had some at first but i also don't mine and game at the same time.

I forget what i did to stop it,  I don't any more and use a Modded bios... that card is a RX 480 4gb ... i have total of 10 cards between four rigs now , working on getting a 1080 ti, i hope in a month I'll enough saved  for one ...

 you can buy the AMD miner AND GTX 1060 nminers on Ebay at a cost and https://www.eastshore.xyz/shop/ has the GTx on sell, if there not gonna gimp the normal cards once there back in stock ill stay with them 399.00 or more for a card i can only use for mining not worse it..

At one time it did .....

LIKE S1 days ......lmao

$2499.99
100Gh/s mining speed
Delivery June 2018


ripe job , I guess if you got cash to throw to the Dogs it's ok ...

I wonder how Many fools have or will buy the per-order  !!!!!

you getting ERROR 46 , with my one  GTX 1060 . I'm having the same ISSUE but after 20 mins it stops hashing and says dead in awesome miner but works fine if i mine eth which i don't mine much .


it only stops if I use this software miner ..while mining for no reason i can find .. and it's in a RIG with 4 AMD Rx 470 CARDS ..

Biostar TB350-BTC - first AM4 Mining Motherboard


bought one two weeks ago . haven't used it yet ... i will in time. there is no big rush to me to use it ..

Drop of hashrate for Polaris cards incoming

when that happens mine other coins and adjust ...  i don't mine ETH much now any way .... I'll buy it from time to time and trade. an  i hate trading  . and would rather mine what i make ...so pretty much i buy eth if I want any , so it won't brother me ..

ETC might pick up more ...

Just sent it ...!!

I was thinking that to there miner only GPU is due out in two days .. on the 23rd or about .... keep watching the DIFF it may drop ...

This another good place

http://www.parallelminer.com/

if you use those raises i woulds use these to

http://www.ebay.com/itm/18AWG-6-pin-to-2x-6-2-pin-6-pin-8-pin-Power-Splitter-Cable-PCIE-PCI-Express/361651807884?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

Make sure the wire is at least 18 AWG , 16 AWG is better and any thing over 18 AWG and up, is bad to use .... for mining this way .......

THat just how i do it ... i don't want to use ATX PSU sense Server PSU run better and i use a 240 line so more power to use  ... and I'm looking at using these https://bitcointalk.org/index.php?topic=1864539.0 to replace the ATX all together and run it all off the server PSU.


and use this server PSU http://www.ebay.com/itm/2400-watt-power-supply-for-Antminer-R4-S7-S9-Platinum-94-200-240v-DPS-2400AB/252701978823?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649


and have three of the ones you linked but like the 2400 WATS one better they are super quite , you can't hear them running at all unlike the one you linked which can get loud on start up and then it settles down some what to were you don't hear  it to much .. the 2400 watt ones, i haven't heard yet .

but the down side you need a 220 line for the 2400 watts one  .. with yours you don't but you only get 800 watts with the so called gold version or black plug version and 900 watts with the so called Platinum version or blue plug version on a 120 line and need a 220 to run at the full 1200 watts ..

INNOSILICON is doing Per orders for a batch due out around AUG /SEP for 1400 US.... I think I'll buy my second tube about then ...from EastShore Mining Devices at that price, that should be about what my 136 MH tube cost me, not bad and btw, i discovered a kind of fix for My POOL SIDE hash rate Issue or it works for me .

 I'm running my 136 MH half tube thu a proxy and so far any pool, i try it on works, the Speeds pick right up and i had to also use Version 2.03 of the software and still wish INNOSILICON would let us use a newer type RPI or any PI type so, SO far so good .... using this proxy :

https://github.com/Stratehm/stratum-proxy/releases


I have been using that  proxy  for about a year or more or sense my Antminer S5 days for other reasons, and gave it a try... SO, i guess it might be me and my ISP and the proxy might by pass something there doing.....

Using CM ZEC Miner





 it Shows the GTX 1060 as a RX 470 using  EWBF ZEC miner

Yea my bad i deleted the last two Screen shots off Imgur by mistake my bad and your are right it's not awesome miner or even CM, it's the EWBF ZEC miner doing it .I sent a PM after i found out what it is  ... because the NV GTX card works fine if i use CM's eth miner and it lists every thing right .. the Problem with EWBF ZEC miner is it's about the only one worth using that actually runs the NV GTX cards at the right speed but if you get the 46  error code ,I thinki i may have to either make it device one on that rig or make that rig a full NV card rig which I plan to do, working on buying a GTX 1070 in about month and another GTX 1060 in a few days .  . but will re post those Screen shots, so you have some idea of how Awesome miner sees it as far as it showing that GTX card as a RX 470 Card that is on device one ..while the GTX card is on device 4 ....only when i mine ZEC .. i may try one of the other software miners again to see if that works and hope it matches EWBF ZEC miner speeds.

 How i found out it's not AM i loaded the NV GTX card without Awesome an only used the EWBF ZEC miner on that rig with nothing else running and it still went dead but i was able to see the error code 46 or noticed it that way ...

Map to System Monitoring should in your case show all 5 cards. Then you need to use the up/down buttons to define the order of them.

and it does
On your Claymore ZEC miner for AMD, you should first of all move down the nVidia card to the last position - then it will not be used in the GPU tab with your 4 active cards.

did that or the GTX 1060 is last on the list .and set as the last device on the list and i made sure by plugging it in on the MB as the last  device to load or as the last device or device four in a five card Rig . .

On your EWBF ZEC miner for nVidia, you should move the nVidia card to the top

did that and it shows it as the first AMD card RX 470 and the other things it does is kill the GTX 1060 over time or shows it dead then stops hashing . but works fine if I use it with CM's ETH miner no stopping shows it prefect etc because the ETH Miner by CM supports both cards AMD and NV ..CM zec miners doesn't sadly with no plans on adding support for NV cards, i asked ...... and no AMD card selling or out of stock for who  knows how long is bad, plus the new NV miner only cards Due out the June 23rd,  some one told me from China or lives goes to China ,those cards may not be sold in the US at all ..and we all know why on that one, i won't go there on, just follow the news ...you can't miss why in the head lines every day ...

but I'll try your above advice again to make sure i did like you said  i may have missed a step and thought i did it that way .