|
i don't how to take that JK
thanks top.
|
|
|
|
Silentarmy vs Optiminer results
I'm running ubuntu with 6x rx 470 8GB
With SA I averaged 520 sols/s using 700W
With Optiminer I'm averaging 660 sols/s using 740W
That is about a 27% increase in speed and this is all with the 15% dev fee included already.
I'm going to have to stick with Optiminer until SA releases a faster Linux miner.
Wow, 15% devfee is insane. And so many whined about Claymore devfee, even when miner was 100% faster. I was assuming the devfee on that miner was crazy high since he wouldn't tell you what it was. Some report Optiminer as unstable, and it is Linux only and harder to set up. Are you comparing solves over time at pool? Silentarmy vs Optiminer results
I'm running ubuntu with 6x rx 470 8GB
With SA I averaged 520 sols/s using 700W
With Optiminer I'm averaging 660 sols/s using 740W
That is about a 27% increase in speed and this is all with the 15% dev fee included already.
I'm going to have to stick with Optiminer until SA releases a faster Linux miner.
Wow, 15% devfee is insane. And so many whined about Claymore devfee, even when miner was 100% faster. I was assuming the devfee on that miner was crazy high since he wouldn't tell you what it was. Some report Optiminer as unstable, and it is Linux only and harder to set up. Are you comparing solves over time at pool? The dev fee is a bit ridiculous but still not bad enough to not use his miner. I have been running the miner for about 4hrs now with with no issues. And I am using flypool to compare the two. If it works, then go ahead and use it, if you get more profit after devfee, its better for you. I would try it if it were on Windows. I am just observing no one has complained about the 15% devfee, yet everyone complained about 2.5% when there were a ton of slow, unstable, and/or pool locked miners at the time. That's why i haven't tired it . and I'm not going to . I wasn't complaining about claymore fee so much as i was give us a choice or way around it. he did !!! . imo to late. and his miner at the time was the only working windows miners worth using and after he put in the off flag for the fee i left it on. ). |
|
|
|
maybe there should be an official silentarmy thread? v5 says they were gonna go for windows support but between the bullshit of claymore jackin for beats and im sure getting bugs and improvements + windows support it will take a minute. just trollin
down load one of these https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg the latest version is SILENTARMY-v5-Cygwin64-r6 down load this https://cygwin.com/setup-x86_64.exethen unzip SILENTARMY-v5-Cygwin64-r6 then read WINDOWS.txt it tells you what package you need form cygwin your set  . |
|
|
|
they are trying to lower stock of 470s because AMD is not producing 470s anymore - they are producing 470D now which has lower power consumption... honestly if your going to buy a lot of 470's maybe its better to wait for the stores to get their 470D stock.............................. 470D is already released by AMD but most sellers wont get stock until they get their current 470 stock down
I thought it was because of nv lowing prices but cool either way the price goes down. |
|
|
|
the only problem with multipool and this one https://hash-to-coins.com/index.php is you have to sell off the coins and convert them your self .cleave and Zpools do it for you , if you don't mine doing that there not bad sites. i used to like selling off coins till i got a lot of useless ones, i couldn't use or were worthless because i waited to long . cleave and zpool convert to btc as you mine and don't forget nicehash . |
|
|
|
nm no idea tried and get the same thing . What is their stratum endpoint? I can't find it after 30 sec looking around www.miningrigrentals.comi made miner and tried to rent it to help this what they give you . equihashminer -s us-east01.miningrigrentals.com:3333 workername -u If your software is not listed: mining software follows the above command line example, select one that includes the algorithm you are mining and check its readme on how to select the algorithm into the command line. Please allow up to 3 minutes for your miner to establish its connection Please use at least one backup server in your local config (if possible): eu-de01.miningrigrentals.com:3333 us-west01.miningrigrentals.com:3333 us-central01.miningrigrentals.com:3333 eu-01.miningrigrentals.com:3333 ap-01.miningrigrentals.com:3333 |
|
|
|
nm no idea tried and get the same thing . |
|
|
|
I just uploaded a new version (r6) of my Windows build of SILENTARMY v5: https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg Another speedup, thanks to krnlx and eXtremal. PLEASE READ WINDOWS.txt FIRST! nice jut tiried it now my R7 370 gets a steady 45 t0 46 :"). testing others in s second. |
|
|
|
What kind of hashrate would I see on a Radeon 370 with this?
at least 40 to 45 mine do in claymore little less but not much. r7370 all default setting i even tired over clocking didn't seem to do anything. I restarted it before the screen shot but it stays about like you see it . Total 41.1 sol/s [dev0 41.1] 1 share
Total 36.6 sol/s [dev0 36.6] 1 share
Total 38.8 sol/s [dev0 38.8] 1 share
Total 39.1 sol/s [dev0 39.1] 1 share
Total 38.6 sol/s [dev0 38.6] 1 share
Total 38.8 sol/s [dev0 38.8] 2 shares
Total 40.3 sol/s [dev0 40.3] 2 shares
Total 42.6 sol/s [dev0 44.0] 2 shares
Total 42.8 sol/s [dev0 43.0] 2 shares
Total 42.7 sol/s [dev0 43.4] 2 shares
Total 43.8 sol/s [dev0 44.8] 2 shares
Total 43.8 sol/s [dev0 47.4] 2 shares
Total 42.5 sol/s [dev0 44.7] 2 shares
Total 42.8 sol/s [dev0 45.5] 2 shares
Received job "7f9c28e55387cbad398d"
Total 43.1 sol/s [dev0 46.8] 2 shares
Total 42.8 sol/s [dev0 46.5] 2 shares
Total 43.0 sol/s [dev0 45.7] 2 shares
Total 43.1 sol/s [dev0 43.6] 2 shares
Total 43.1 sol/s [dev0 43.4] 2 shares
Total 42.9 sol/s [dev0 43.2] 2 shares
Total 42.9 sol/s [dev0 41.7] 2 shares
|
|
|
|
|
I may have a power problem two cards stay in the low 80 avg and one dropped to 54 or lower and is avging around 50 . playing with power limit looked like it made it worse.
|
|
|
|
How can i get Silentarmy running on windows?
https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg Download cigwin 64bit when asked for packets search python3 interpreter install and run from start.bat included in zip file(don't forget to edit...or not Is python3 interpreter sufficient or should I install recommended dependencies? I installed everything it recommended after selecting the 6mb python package, it works fine. Install everything that is recommend or you might not like the results if you don't . it's a fast a install or was for me . |
|
|
|
my 470 does 80 or better with modded bios drivers might be a problem , to test it use the windows default AMD drivers it downloads on install it may work better with them. or other drivers .
Your setting is about 1300 core and 2000 memory? I have only ~77 per rx470 4GB 1100/2000 with BIOSmod I guess you would say mine are doing whats yours are ? . Total 238.9 sol/s [dev0 78.6, dev1 84.0, dev2 81.6] 73 shares
Total 238.9 sol/s [dev0 80.0, dev1 82.9, dev2 82.0] 73 shares
Total 238.7 sol/s [dev0 80.8, dev1 81.7, dev2 82.7] 73 shares
Total 237.0 sol/s [dev0 77.7, dev1 82.4, dev2 80.5] 73 shares
Total 236.8 sol/s [dev0 75.6, dev1 82.0, dev2 81.1] 73 shares  I think that could be better if i knew how to . that GPU load isn't right .I tired over clocking didn't seem to do much so i left how it is . |
|
|
|
Holy Sh*t I canīt believe me eyes at the moment, but my power consumption analyzer works accurate...! 1x R9 290x 3x R9 Nano (lowered voltage/clocks/power limit because of f*ckinī high electricity rates here in Germany) Before/Claymore ~340 Sol @ 600W Now ~390 Sol @ 530W or alternatively ~375 Sol @ 470W  (canīt decide which attitude I should choose at last ^^) Thats just sensationally!! I Knew when i run SA with Ubuntu, i knew then nothing could touch it once it was tweaked, so i waited for windows . |
|
|
|
My msi rx 470 4gbs are performans slightly worse on v5 than claymore's. Same roms. What are your experiences.
Claymore: 65-75 h/per card
V5: 60-70 h/per card.
my 470 does 80 or better with modded bios drivers might be a problem , to test it use the windows default AMD drivers it downloads on install it may work better with them. or other drivers . |
|
|
|
How to install silentarmy windows?
https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg download SILENTARMY-v5-Cygwin64-r5 download this https://cygwin.com/setup-x86_64.exethen unzip the SILENTARMY-v5-Cygwin64-r5 and read the WINDOWS.txt it tells you just what to install from Cygwin64 you don't need it all unless you want it, o yea install anything the program recommends after you pick the package or it might turn out not so good or errors . thanks top. |
|
|
|
|
should have siad a few more different models went down but your right .
|
|
|
|
I'm not seeing that much difference using the win version from CZM v4. Currently getting about 71-75 h/s
This is my bat file
c:\cygwin64\bin\python3.4m silentarmy --instances=1 -c stratum+tcp://eu1-zcash.flypool.org:3333 -u t1Yg2NeHCDTNMozwRhf6UxQXSLJQSrGhtgX -p z --use 0
I have a i5-4590 CPU, 8 GB RAM and a R9 280 non X GPU (using 1200 GPU clock and 1500 Memory clock). Is there anything i can modify in the bat to possible improve my speeds?
Sorry if this is obvious for others but i'm kinda new to running linux stuff on windows
you may not the only difference is no fee . |
|
|
|
any Rx 470 is good for mining to get good speeds you may need to mod the bios but any 470 is good . they all run about the same at stock or modded from what Ive noticed . ops the same for 480 my bad . forgot i listed 480 to sorry. power color are goods card i have owned a few in the past and still own a 280 by them . nice catch i didn't even see that 480 for 189, i may buy it . it just came out so we might see more 480 below or at 200. http://www.newegg.com/Product/Product.aspx?Item=N82E16814131706#closehope it s still there Monday when my money clears in my bank . |
|
|
|
|
Show Posts
