|
When will be the explorer online?
And is it possible to claim bstash from my ledger account?
Maybe you make a electrum wallet?
|
|
|
|
Nvidia 3 Gb are there solutions with DAG ?
Mining other coins with lower DAG, there is no other solution. Nvidia 3 Gb are there solutions with DAG ?
Use Windows 7 and it will work. I have an EVGA 1060 3GB running on Windows 7 just fine with version 12.0. With Windows 10 the system utilizes 20% of the memory and the DAG won't load because of that. In Windows 7 that is not an issue. And how long? 1 or 2 month? and 20% system utilizes is wrong, this would be around 600mb. Sorry mine other coins with this cards is the only right solution. |
|
|
|
Look into the log file from Claymore Miner and post the last lines here. And please give us more information. Cards, Driver version, which OS and so on. We have no glass sphere. wrong board, but i can't not answer a mining related question  do the following 1- configure the bat file to this code EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0xd3a9b641986cd95b3ccd71e246e2e1ada5349c3b.rig1/vahpourvisuals@gmail.com -epsw x -mode 1 2- ensure the EthDcrMiner64.exe and the start.bat are on the same folder if not then it's not going to work. let me now how it goes, if you face any further issues , post away, if i take too long to reply (24hrs or more ) feel free to send a pm. Good luck. 1. your command line is the same like the one from vahpour, you only delete the -ftime command, so why should this one work better? 2. Claymore starts, he postet the first lines, so your second point is clear  |
|
|
|
Hi there. I've just bought the parts to my first mining rig - i chosed to go with the Rx 580' as they were cheap and had a nice hashrate. From what i've read they're providing the same (or more) hashes than a 1060, which is more expensive. But then again - im new to mining so some1 might have better answer. I have nvidia and amd 1060-1070 Rx 480-570-580 Amd more power consumption and heat Nvidia low power consumption Amd just good with ethash algo doin 30/35 mh with mod Nvidia can mine all algorithms with 100% speed more than AMD! So... You maybe choose wrong 😐 Nvidia can mine all algo with 100%. Ok and what is 100% from what? Stupid answer. Monero (all cryptonight forks) works better on AMD then on Nvidia. how much does a nvidia 1070 (300€) cost and how much an amd 570/580 (130€/160€) cost? All reach over 30mh. There are some algos better for nvidia and there are also better algos for amd. |
|
|
|
My miner doesnt has this option. So I have to find any software to monitor and send email or stop miner software if the temp over 85c
Which miner you are using? How many cards? Which OS you are using? Please dudes give us more information about the actual situation and what you need. There are many ways. |
|
|
|
Hi All
I Have this error in my rig for all GPUs and i used simplemining OS
please your support to solve it
Setting DAG epoch #232 for GPU10
GPU 8, CUDA error 11 - cannot write buffer for DAG
GPU 3 failed
Setting DAG epoch #232 for GPU3
GPU 3, CUDA error 11 - cannot write buffer for DAG
GPU 11 failed
Setting DAG epoch #232 for GPU11
Setting DAG epoch #232 for GPU2
GPU 2, CUDA error 11 - cannot write buffer for DAG
GPU 10, CUDA error 11 - cannot write buffer for DAG
GPU 7, CUDA error 11 - cannot write buffer for DAG
GPU 5 failed
Setting DAG epoch #232 for GPU5
GPU 5, CUDA error 11 - cannot write buffer for DAG
GPU 11, CUDA error 11
Setting DAG epoch #232 for GPU0
GPU 0, CUDA error 11 - cannot write buffer for DAG
ETH: 12/28/18-16:35:16 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Tim
More infos, no one can help you with no information about the cards, os, driver, and so on. |
|
|
|
|
New thermal paste on the vram chips can boost this, but i think no one will change the thermal paste for every card. To much work for a little bit better hashrate.
|
|
|
|
Hi there!
All my rigs are still on Windows 10 build 1709. Has there been any development regarding mining on Win10 build 1803 and later? Is it known what is/was causing the problem?
I've had no issues with Windows 10 builds 1803 and 1809. vcn and many other network features are broken on windows 1803, for now only 1709. This is wrong, windows 10 builds 1809 and 1803 works like 1709, no issues. |
|
|
|
v12.0:
- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.
Linux version will be available a bit later.
oh funny No fee for VGA 2G 3G cannot mining ETH,ETC You can mine other coins like callisto with this cards |
|
|
|
better way is buy this coin ....
Nope you are wrong. BURST+BHD Mining  |
|
|
|
what coin to use ProgPow?
BCI - Bitcoin Interest |
|
|
|
Don´t copy the 1500 Strap, use SRB BiosEditor and use the Pimpmystraps Button. |
|
|
|
|
the rx550 can reach over 14mh, the rx560 can reach over16mh
|
|
|
|
What is Blake2s? I cant find any coins on whattomine.com
Verge, Shield, Neva, Info, Taj, Globaltoken and many more. Google? |
|
|
|
Hallo JCE ich versuche 2 Tage den JCE Miner von Github zum downloaden. Leider blockiert mir Google Chrom den download. was kann ich tun um diesen Miner zu bekommen ( Sicherheitseinstellung hab ich geändert). Anderen Browser?
Du siehst aber schon das wir hier in einen englischen Forum sind und du englisch schreiben musst oder geh in den deutschen Abteil. Wenn du aber schon probleme hast einfach in Chrome auf Datei behalten zu drücken nach dem download (Downloadtab öffnen nach Download), dann wirds mit dem ganzen rest hier schwierig. |
|
|
|
Lebt dieser thread hier noch? Würde mich interessieren was ihr an Erfahrung mit verschiedenen Pools habt. Ich habe für XMR ein RIG mit 11 R9 270x laufen. Früher war die Hashrate mit Claymore bei ca 400 h/s pro Karte. Nun habe ich den xmr-stark. Dieser Miner schafft aber nur noch 300 h/s pro Karte mit gleicher Einstellung. Andere Einstellungen bringen auch keine Änderung. Vielleicht kennt jemand den Grund dafür oder hat eine Lösung
Dann hast den miner einfach schlecht eingestellt. 270x 2GB erreichen bei mir durchschnittlich 480 - 530 hashes zur Zeit bei XMR V8. Mit besseren Timings wirds demnächst noch ein wenig mehr. 270x mit 4GB hab ich gerade bei 480 hashes laufen. Nimm JCE Miner, da kommt deutlich mehr im Pool an. |
|
|
|
Too low core clock frequency, imho, around 1100-1150 is ideal in my opinion, even a bit more if micron memory please do not respond to his spam posts. this is just advertising for his really bad homepage. |
|
|
|
new Algo Equihash 200,9 please add
Isn't Equihash 200,9 the same as the classic Equihash algorithm - used for ZCash and many other coins? Yes Equihash 200,9 is the original zcash equihash, so it isn´t new ^^ |
|
|
|
|
deleting the pool information does not help, the miner then runs for bitmain.
Antminer have no idle mode. I start a miner every day 3 to 4 times with cable plug in and unplug.
|
|
|
|
|
Show Posts
