Bin da mal heute über FPGA gestolpert..

Habe nur ältere Beiträge gefunden, aber nichts genaueres..

Wie sieht es mit sowas hier aus.?

https://fpga.guide/en/top-fpgas/

Gibt da verschiedene.. wenn die versprechen was die halten, sollte es doch zum Minen sinnvoll sein, oder.?
Gibt es irgendwelche Erfahrungen.? hat jemand sowas am laufen.?

Sorry that forgot to reply to your question about Staking. The proportion of coins that need Staking is not simply fixed or decrease progressively. For the first 1800 blocks, the miner would get 40% block reward at a fixed proportion, the others will be contributed to the Diskcoin Foundation to cover project development costs, promotion costs, and as a fund to support related ecological projects. And from the block height of 1801, an algorithm named the DES(the Dynamic Equilibrium Staking)will be activated. The DES will automatically adjust the staking percentage according to the difficulty of mining, the amount of produced Diskcoins and the percentage of Diskcoin staking to ensure the good operation of the whole system.

1) The only people who love POC2 are the ones with PB's of FREE storage, if you have to buy the drives, then there will never be an ROI (i've mined Burst (nefore it was Burst), and all its spinoffs, so have some history
2) With regards the staking, you havent answered my question...If i don't stake, but win a block, so i only get 40% reward, where does the other 60% go?

I have a few nVidia 1080Ti mining the ETH. I noticed the hash rate decreased about 5% in the last few months. Is it due to the DAG file size similar to old AMD cards?

I already answer you. It's not the OC, nor are the risers. It is the damn windows and its updates, something has to improve in AM to control this.

You can not undermine and indicate "miner offline" and reboot rig. It also happens directly by mining, PLASH and reboot if notice. And this already reducing the OC a lot.

Insluso some miners of abnormal form occupy 100% of CPU, so much that it makes the system fail. I have seen several times already Intelibreeeze the remote AM program, hanging using more than 30% of CPU (depends on the model, this almost i3)

It's not me, it's not the other guy, there are many of us who are reporting these errors and it's not my first summer with AM undermining, I know what I'm talking about. Low OC, a lot of ventilation, air extractors, direct air to the platforms, but they can be at 50 degrees and suddenly reboot for no reason or stay in offline miner and restart by the rule.

Is this even real?



The name of the coin is derived from zcash no doubt.


And seems that the existence is just for quick cash here.
What is the main purpose of this fork?
Maybe mine and sell. That's all there is for this coin.

There are many differences between Diskcoin and burstcoin. One of the main differences is that Diskcoin uses CPoC ( Conditioned Proof Of Capacity ), which is based on PoC2 and adds the Staking mechanism. Miners who are involved in mining need Staking the corresponding Diskcoins to get the most benefit. The proportion of coins that need Staking is not simply fixed or decrease progressively. For more details, you could check in our White Paper: https://diskcoin.org/files/diskcoin-paper/Diskcoin.pdf

Can you explain simplly?
For PoW, more hashrate = stronger hardware (CPU, GPU or ASIC...)
For PoS, more hashrate = more coins.
Sor for PoC, more hashrate = ?

Very interesting indeed , i remember trying to mine burst coin couple of years ago wasn't that easy ... but i remember the plotting thing takes Very long time it was just old harddisk i had ... So will we able to use Burstcoin plots to mine Diskcoin ?? or we need to re plot the hard disks in order to do so

Because I can spend say 15G and invest in Ethereum at the current market price of $260(June 19') and get 57 Ethereum. Or I can put 15K into mining GPUs and earn 16 ETH a month or about 200 in a year. What makes more sense? yes there more involvement with mining, but it takes risks to make money. With what I'm putting out for investment is minimal compared to the returns for cryptomining. Plus I'm just an IT/Tech enthusiast also work as IT for a living. It all goes hand in hand.

Right now I'm trouble shooting the RX 470's. I got one rig of P104-100s up and running hashing away fairly easy.

I cannot get the newest Claymore 14.6 STRAP function to work without crashing. Unsure what's causing it. Now there is a bit of a caveat Since these were used some cards were BIOs modded others left stock. I put whatever was BIOs modded back to stock from other GPUs that were stock, however, I noticed in windows that quite a few GPUs have the 'ERROR 43' in windows which can only be fixed by applying the ATIpixel patcher.

Setup:

13x Rx470 4GB (Stock BIOs)(Hynix, Samsung, Elpida)

Asrock H110 Pro BTC+

G3930/4GB RAM/EVGA 450w PSU (for motherboard)

Delta 2400w Server PSU (For GPUs)

Windows 10 (1903)

AMD 19.5.1 Drivers



Now when I tested the STRAP function with a single card, works fine. Will launch and I'm seeing good hash rates of 31mh/s~. However, when I plug in all 13x 470's try the STRAP feature, it will get to 2nd GPU applying STRAPs then Windows will crash and restart itself. This happens every time without fail. Now if I only apply it GPU 0 the STRAP then works fine again, however applying it to GPU 0 and GPU 1 it will hard crash and restart windows. Trying GPU 0 and GPU 2 results in the same thing. Also, note that RXBOOST works perfectly fine. The cards will hash fine with stock BIOs or even Modded BIOs using RXBOOST.



So Far I've tried

Raising voltages for Core/Memory or just leaving it stock. Doesn't matter.

Updating Microsoft .net framework and C++
Flashing various Stock BIOs(found online) and even Modded BIOs.

Different Windows versions 1809 vs 1903.



Furtherest I've gotten was 4-GPUs using the STRAP function. Once I started adding the 5th and 6th or more it would crash and restart windows. My Assumption is that it has to do something with the BIOs and the ATIpixel patcher? However, I'm unsure how to remedy this since only 1 or 2 GPUs seem to not have the error 43 in device manager. I'm unsure of this and wondering if anyone has encountered the same problem.

I cant understand how this mining works? We should have some free space on our hard disc for mining your coins? More free space - more coins rewads? Is this safe for our data and discs at all? This is something like cloud storage?

PW for download?

Anyone has the benchmarks for mining Zilliqa  ?

It is the truth with Nvidia. Has nothing to do with fanboy or not. Nvidia brings less frustation and more algos.

But anyways. Dont forget the new Nvidia "Super" series from 2060 to 2080 (maybe also the 2080 Ti). Which will attack AMD's new series and increase hashrate (for the same price as before).

Is there a way to apply the GPU overclocking settings by algo and by card ? It sucks to have to change the settings for each card when i switch algos

Introduction

Zilliqa has developed a new way of mining compared to regular methods we all know of. POW is every 2-3 hours. That's right 2-3 hours. In that POW time, your miners only mine for 1 minute. I kid you not. This is to help the planet go green with mining but I am greedy and would like to use all the rest of time to mine something.

Dual Mining Zilliqa
Zilliqa miner already has a function to allow dual mining. For Zilliqa, dual mining is Mining on own coin (eth, jesus coin, grin, etc) while waiting for POW for Zilliqa. When POW is close, zilminer will stop your mining operations of eth (or any other coin you are mining) and begin to mine Zilliqa for one minute. After the minute has passed, it continues to mine your eth.

Problem

Although dual mining Zilliqa is great, it never works out the way you expect. Unexpected issues like zilminer crashing, your eth miner crashing, heck your pc crashing have been an issue from day one. Read Solution below.

Introducing Zilliqa- Switcher

Instead of your miners crashing, I offer you a solution to mine any other coin with any other miner while still making it in time to mine Zilliqa. This is a work in progress but it works well.

Download Link
https://mega.nz/#!j9USgSwC


Instructions

Download Zilminer, Download your other miner (let's say Claymore), Download Zilliqa-Switcher
Extract all files from all three downloaded packages in the same folder.
Optional: Create an eth.bat script if you need to.
Run Zilliqa-Switcher
First option, choose your miner
Second option, choose how you run your miner, either using only exe or using a bat file (created in step 3)
Third option if you chose bat file, enter the name of the bat file, (eth.bat , grin.bat)
Forth option, enter your Zilliqa Address. This can be the old formart Zil address or New Format Zil Address
That's it


Errors + Solutions

My Command Prompt screen no longer crashed/stopped doing anything.

This is an issue with Command Prompt. Right click at the top of the command prompt, choose Properties, Disable Quick Edit. To permanently fix this, choose Default instead of Properties then Disable Quick Edit.

My miner is not on the list.
This project is a work in progress. If you do not see your miner of choice, please create an issue here and I will quickly add support for it.

While they had a good performance increase in games, same can't be said for mining. I still think nvidia is overall better for most algorithms and when I say most, I say at moment 90%.

Hi guys,

I can't anymore access anorak.tech website, does anyone knows why the site is no more accessible ?

Also if anyone knows a website where I can find bios mod collection. please share.

Thanks.

The line 1,2,3 are for list mode. This is the view in your screenshot.
The last line 1 is for compact mode.

You have customized the compact mode. To view, change the "Miner View" to compact list.

He more than a week didn't answer in this theme...