I have 144 pcs NVIDIA GTX1050 2GB GPUs which mining cryptonight-xhv. What do you advise me to mine ?
I dont want to sell my GPUs. I tried to mine NIM (argon2d algo). But the rigs are unstable. is the any ethash algo coin which can mine with 2GB GPUs ? (I know ETH and ETC cannot mine with 2GB GPUs.)
BEAM (BEAMHASH3) with MiniZ or BTG (144,5) but it won't bring much profit, but the most the most of all options you have Look at whattomine https://whattomine.com/coins
|
|
|
HAHA i'm mining with windows and 4GB cards, and i give not up, because why? My Rigs running well.
After reading your description the fix for windows is -> use internal gpu as first gpu and you have no problems.
Wait until 370 epoch, you will change your mind. Kawpow works on 4GB still but i thin kthat profitability will be killed when all those 4GB or 50% of them will switch to Kawpow ... good luck with profitability. LOL epoche 370, this is what i expected. This is in November so what is the problem? With linux i can mine up to epoch 380? Very usefull to change the OS for about 1 month So about what we discuss? Your advertising for simplemining os?
|
|
|
........I don´t know why i get this error. I do some research tomorrow. My other 10 rigs with windows10 running well.
Those Windows 10 rigs will stop working also (if they are 4GB) I have created new thread with explanation why is this happeninghttps://bitcointalk.org/index.php?topic=5265702.0nope will work up to epoch 370. Tested with benchmark. Give me reason why it stops.
|
|
|
HAHA i'm mining with windows and 4GB cards, and i give not up, because why? My Rigs running well.
After reading your description the fix for windows is -> use internal gpu as first gpu and you have no problems.
|
|
|
Is this miner dead? Any chance to fix it?
Man dude and when will you give us some informations? DRIVER, CARDS, OS AND SO ON!!!!!!
|
|
|
My rigs stop mining today, when Epoch 352 went active.
After restart, 13 GPU are detected, but AMD driver is not capable of stopping fan on a single GPU anymore, indicating, no control.
When miner starts, miner is loading, but no hashing.
In "show miner" it say, all GPU hang and miner must be restarted.
Anyone have similar problem, or solution ?
Have tried ethOS update, no result. Have tried miner update, no result.
Running ethOS 1.3.3, without trouble for month.
Any input appreciated.
I have a Rig with ethos and had the same problem. I switched to hiveos and claymore and i get error: not enough vram for dag. switched to hiveos and phönixminer and all is ok. I don´t know why i get this error. I do some research tomorrow. My other 10 rigs with windows10 running well.
|
|
|
Ohhhh, thats bad news! And why you switch? I can mine with 4GB cards on windows up to epoch 370.
|
|
|
Hi Patrik, question, or maybe a suggestion Is it possible in the rules to set some trigger for a rig A, but the action (like a start/stop miner command) is for another rig B? Or maybe multiple rigs B, C, D, .....? If this is not possible right now, it would be awesome if you could do that. Thanks for the suggestion. This isn't possible today. Can you give an example of when this might be useful? This would be of help for me to understand what's missing today. Thanks! Hey Patrik, here are two examples for my own benefit. I have a few watercooled rigs with 2 seperated rigs in 1 water-loop. If for whatever reason the main-rig turns off, there is no waterflow anymore and I have to shutdown the second rig too. Right now that shutdown is managed by a smart socket, but if AM could handle that with just a rule and much faster, it would be awesome. I also have multiple containers, running each 4 rigs inside, but with just 1 power line per container. If the main-rig including the power for the containers airflow turns off, I have to shut down the other 3 rigs to protect them of overheating. AM could handle that even faster than any smart socket. I think this option can be useful for other miners too, to protect rigs in a better way without using external stuff like smart sockets or so. How could this be done? One idea would be in the rules -> actions -> "miner command" for example another line which is already set to "this miner/group", but I also can choose other miners or groups. But maybe you will find a better way like always it is maybe better to make the water flow separately and don´t let control a rig the waterpump. The same with airflow, it make no sense to control the airflow or waterflow for multiple rigs with one rig. You look for the wrong solution my friend. And patrike it is possible at the moment to shutdown many rigs if one rig goes down. You can set a rule that push an .cmd file with start/stop api commands or shutdown. Much work at the moment, but it is possible. An easier way would be nice, but not for the strange scenario joseph32 explained.
|
|
|
And why we must talk about Your calculators are wrong, at one calculator you set fee 1% and on the other you are set fee to 0? Different Calculators give different results that is nothing we must talk about.
|
|
|
Monitor connected to GPU1?
yes my friend, a monitor by HDMI cable, also connect the cable in the GPU2 and the same thing happens, the GP1 that is in the main pcixpress, I also try to boot without connecting any hdmi cable to the cards, and nothing, my motherboard has no integrated video I think Windows uses more video memory on primary videocard. This causes your problem. And nothing will help there. You need integrated videocard or 1st GPU with 6G or 8G onboard... +1 Nothing more to say.
|
|
|
Hi patrike, i have a Problem with GPU Clock Profiles. I save the GPU settings from a RIG, and sometimes if i want to change some settings from 1 GPU Profile i get an error. But this error makes no sense to me. And other Problems: NBminer 31.1 recognize AMD AND NVIDIA CARDS, so if i want to set some devices for the miner, the order is wrong. Awesomeminer only show nvidia cards, and will begin with device 0, but the first card is a AMD card. So the order of the devices are not correct. Wildrig Multiminer the same problem. It will recognize AMD AND NVIDIA CARDS, but i only can choose AMD cards in Awesomeminer. So the order is wrong too.
|
|
|
its possibel to add on awesome miner a string like in claymore miner like -rxboost and more like this
Please right click on your miner and select Properties. 1) On the Environment tab, enable "Run mining process with administrator privileges". This is required for -rxboost and similar parameters 2) On the Command line tab, please enter the "Parameters to mining software" you want, like -rxboost. run mining process with administrator privilges is not required for -rxboost. only for the first start to install the driver, but after that, administrator privilges are not required!!!! For me it is important, because the console in AM will show nothing with administrator privilges or it will show the console in a very ugly way
|
|
|
Patrike is it possible to add the HTTP header option (Content-Type: application/json) to the "Create notification" rule?
|
|
|
Ok thanks Thanks waiting to test it out. Will be a huge update to monitoring the rigs
The new version is available. Please add this HTTP header and give the Discord webhook a try: Content-Type: application/json Yes it works
|
|
|
Is the AM Webhook compatitble with Discord webhook intergration?
Thanks for your question. Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it. The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications. Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination. There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent. I tried, but AM send no webhook to Discord. I test it with a normal rule and a rule with activation via action toolbar. Please open the Awesome Miner log file (toolbar: Tools -> Log File). Search for "Sending Webhook". If Awesome Miner sends the HTTP request, you should be able to see the URL it's being sent to. In case of connection failure, it should be logged as an exception. I get this in the Log file: 15.06.2020 14:24:35.622 [122] [S Sending Webhook POST to: https://discord.com/api/webhooks/722053497662472282/vN5L2VdtOUVQ2_qyNIdSjpd57gVa_krTXAzlRF9Xm8LLomBPungQwFDcL8hRuwvZfErz15.06.2020 14:24:35.836 [122] [E]System.Net.WebException: Der Remoteserver hat einen Fehler zurückgegeben: (400) Ungültige Anforderung. 15.06.2020 14:24:35.836 [122] [E] bei System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request) bei System.Net.WebClient.UploadString(Uri address, String method, String data) bei #=zlQ$o$K9xavCaceTJJ2KjUcQDwvKxfEvrGUqnmttdR6vm.#=zK$vF2Z0=(String #=zWbiXOg0=, #=zM7Yz8troyqNmb0JpIPVRuFrlS_Ydij54JLHkw$2h3yBK #=zt9myUJE=, String #=zzcig3Vs=) And sometimes i only get this: 15.06.2020 15:38:45.322 [023] [S Sending Webhook POST to: https://discord.com/api/webhooks/722053497662472282/vN5L2VdtOUVQ2_qyNIdSjpd57gVa_krTXAzlRF9Xm8LLomBPungQwFDcL8hRuwvZfErzBut i see no message in Discord. I was able to identify the problem here. Discord expects a HTTP header called Content-Type to be set to application/json. The webhook feature in Awesome Miner doesn't allow you to add headers, but I've implemented support for that now. In the next release you will find a new field "HTTP headers" where you should add the following line: Content-Type: application/json Ok thanks
|
|
|
And how about starting custom Zil mining bat as I don't want the phoenixminer to spend time tuning my AMD cards
Or add the -gt values to the phönixminer startbat lol. you only run phönixminer tuning only 1 time and than you can add the -gt values and it the cards mining at full speed without tuning.
|
|
|
Is the AM Webhook compatitble with Discord webhook intergration?
Thanks for your question. Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it. The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications. Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination. There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent. I tried, but AM send no webhook to Discord. I test it with a normal rule and a rule with activation via action toolbar. Please open the Awesome Miner log file (toolbar: Tools -> Log File). Search for "Sending Webhook". If Awesome Miner sends the HTTP request, you should be able to see the URL it's being sent to. In case of connection failure, it should be logged as an exception. I get this in the Log file: 15.06.2020 14:24:35.622 [122] [S Sending Webhook POST to: https://discord.com/api/webhooks/722053497662472282/vN5L2VdtOUVQ2_qyNIdSjpd57gVa_krTXAzlRF9Xm8LLomBPungQwFDcL8hRuwvZfErz15.06.2020 14:24:35.836 [122] [E]System.Net.WebException: Der Remoteserver hat einen Fehler zurückgegeben: (400) Ungültige Anforderung. 15.06.2020 14:24:35.836 [122] [E] bei System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request) bei System.Net.WebClient.UploadString(Uri address, String method, String data) bei #=zlQ$o$K9xavCaceTJJ2KjUcQDwvKxfEvrGUqnmttdR6vm.#=zK$vF2Z0=(String #=zWbiXOg0=, #=zM7Yz8troyqNmb0JpIPVRuFrlS_Ydij54JLHkw$2h3yBK #=zt9myUJE=, String #=zzcig3Vs=) And sometimes i only get this: 15.06.2020 15:38:45.322 [023] [S Sending Webhook POST to: https://discord.com/api/webhooks/722053497662472282/vN5L2VdtOUVQ2_qyNIdSjpd57gVa_krTXAzlRF9Xm8LLomBPungQwFDcL8hRuwvZfErzBut i see no message in Discord.
|
|
|
Is the AM Webhook compatitble with Discord webhook intergration?
Thanks for your question. Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it. The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications. Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination. There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent. I tried, but AM send no webhook to Discord. I test it with a normal rule and a rule with activation via action toolbar.
|
|
|
My mining rig has been running for 2-3 years without any issues, but one of the psu broke and after i changed it the mining software closes on startup there is no error msg or anything, ive tried adding "pause" and checking the logs but nothing, looking for any tips what the issue is, here is what it says in the log
15:01:43:542 1918 Check and remove old log files... 15:01:43:546 1918 args: -epool eu1-etc.ethermine.org:4444 -ewal 0x34aa08523e7DF76e51e24E7Eae5e3661d460eA36.VeraBear -epsw x 15:01:43:547 1918 15:01:43:548 1918 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 15:01:43:549 1918 º Claymore's Dual GPU Miner - v15.0 º 15:01:43:549 1918 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º 15:01:43:550 1918 º Supercharged Edition º 15:01:43:551 1918 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 15:01:43:552 1918 15:01:43:552 1918 b755 15:01:43:769 1918 ETH: 1 pool is specified 15:01:43:770 1918 Main Ethereum pool is eu1-etc.ethermine.org:4444 15:01:43:771 1918 DCR: 0 pool is specified
There is a official Claymore thread. Why you didn't ask their? Same question like 1000 times before: OS? DRIVER Version? CARDS? with no information, nobody can help you.
|
|
|
-clkernel 3 uses 2 DAGs so 8GB are not enough to hold them and it will stop working at some moment when DAG size approaches 4GB.
If my mem is 8 and 2x3,75=7,5 (current ETC) there is still 0,5 free mem I guess if 4gb cards are working on -clkernel 1 then 8gb should work on -clkernel 3 Or i am missing something... You using Win10? Which driver you are using. You can't just calculate 2x3.75. Can you mine ETH with clkernel3? If so, then you have not enough vram for ETC and clkernel3. What driver your using.
|
|
|
|