Why the btc-e is still running?!?!
They have not woken up yet; it's still 7:47 in Moscow. Any luck on your withdrawal? You should be hoping BTC-E still runs! Still pending somewhere at BTC-e subsystem/queue... Thanks for asking! ^^ It still runs but, seems useless... Right?! :-P |
|
|
|
|
Why the btc-e is still running?!?!
|
|
|
|
Have you ever considered depositing the BTC-E code, buying coins (at any price) and then withdrawing the BTC? It looks like the hacker only "faked" USD. The BTC wasn't stolen or "faked" thus eventually the price will crash back to nearly nothing but you should still be able to cashout BTC.
Thanks for clarifying that to me D&T! I really appreciate it! Best! Thiago |
|
|
|
FWIW, I do believe the hacker is using the name 'MrWubbles'.
Real Time!! |
|
|
|
.....
Your bitcoin, as long as you withdraw it, should still arrive. Good luck.
Unfortunately, you might have to write off your USD, or sell it at a massive loss. There is no way BTC-E has enough to pay out the USD.
I do not want withdraw "fake USD" from BTC-e... I will not touch that USD. I just want, at least, those 140 BTC (total is 180 I had there for sure), withdraw still "pending" (i.е. not reached my wallet)... :-/ Good luck for those that feel a bit lost now... :-P This is less worse than the "life with the government and banks"... lol Unless one of the following is true, your BTC withdrawal will still go through. - The hacker hacked in BTC as well.
- BTC-E used fractional reserve.
- BTC-E had a cold wallet.
- BTC-E wakes up and discovers the hack.
Yes, I'm telling the truth. It is all here registered in my btc-e account anyway... ;-)
I strongly suggest you discard the USD by selling it, while it is still worth ~1/5 of its actual value. The 40 BTC that is missing has been converted to USD, most likely. You can still retrieve some of that value from it.
How so?! |
|
|
|
.....
Your bitcoin, as long as you withdraw it, should still arrive. Good luck.
Unfortunately, you might have to write off your USD, or sell it at a massive loss. There is no way BTC-E has enough to pay out the USD.
I do not want withdraw "fake USD" from BTC-e... I will not touch that USD. I just want, at least, those 140 BTC (total is 180 I had there for sure), withdraw still "pending" (i.е. not reached my wallet)... :-/ Good luck for those that feel a bit lost now... :-P This is less worse than the "life with the government and banks"... lol |
|
|
|
......
Yeah... they're probably gone for good.
Don't say that!  Terrible move I made... lol |
|
|
|
OMG... I had 180 Bitcoins there... Jesus...
My latest withdraw at btc-e webpage says "confirmed", but nothing reached my wallet yet.
40 Bitcoins was "sold" there... And 140 Bitcoins are stucked at some point there... In Russia... Damn!
Jesus no, please no... Please... no... Oh God... lol My documentation: https://bitcointalk.org/index.php?topic=40889.msg1066779#msg1066779I have screenshots... To remember... Damn... :-/ |
|
|
|
I had 180 Bitcoins @ BTC-e... 40 Bitcoins was "sold" at: BTC/USD Ask (U) 14.69 USD 5.14 BTC 75.5066 USD 04:36 31.07.12
BTC/USD Ask (U) 12.25 USD 5 BTC 61.25 USD 04:36 31.07.12
BTC/USD Ask (U) 11.69 USD 10 BTC 116.9 USD 04:36 31.07.12
BTC/USD Ask (U) 11 USD 10.13 BTC 111.43 USD 04:36 31.07.12
BTC/USD Ask (U) 10.51 USD 3.79 BTC 39.8329 USD 04:36 31.07.12
BTC/USD Ask (U) 9.971 USD 5.94 BTC 59.22774 USD 04:32 31.07.12
LTC/BTC Ask (U) 0.006 BTC 1000 LTC 6 BTC 11:51 29.07.12
5.94+3.79+10.13+10+5+5.14=40.0 "probably lost"... I have a USD balance of "463.2189" probably "fake USD"... ... My latest 140 BTC withdraw at btc-e webpage says "Completed", but nothing reached my wallet yet. #1296027 -140.0597 BTC Withdrawal BTC to address BTC_ADDR_HIDDEN 31.07.12 05:07:08 "Green V - Completed"
#1295485 -140.0597 BTC Withdrawal BTC to address BTC_ADDR_HIDDEN 31.07.12 04:55:17 "Canceled"
#1295299 +140.05975336 BTC BTC payment 31.07.12 04:52:04 "Green V - my "panic deposit..."
40 Bitcoins was "sold" there... And 140 Bitcoins are stucked at some point there... In BTC-e... Please, BTC-e, those are my real coins!! Best, Thiago |
|
|
|
|
OMG... I had 180 Bitcoins there... Jesus...
My latest withdraw at btc-e webpage says "confirmed", but nothing reached my wallet yet.
40 Bitcoins was "sold" there... And 140 Bitcoins are stucked at some point there... In Russia... Damn!
|
|
|
|
|
I am unable to withdraw my 140 BTC from BTC-e.com, this is quite anoying.
The money is frozen at btc-e transfer history...
And I "sell" some BTC for +20 during this thing...
What can I do, cry?!
|
|
|
|
|
Ouch! venderam 2 Bitcoins por 2,20 Reais!
Eu pago 5!! Quem quer vender?! LOL
|
|
|
|
Hello all. How can cgminer autostart in Linux Ubuntu 12.04 ? Script like #!/bin/bash
cd ~
cd /cgminer-2.6.1-x86_64-built/
./cgminer -o http://pool:port -u usr_name -p pass -I 9
is not working Thanks for help Hi! I'm using this: cat /etc/init/btc-miner.conf
description "Start BTC Mining"
start on runlevel [2345]
stop on runlevel [!2345]
kill timeout 30
script
exec /usr/bin/screen -dmS CGMiner su -c '/home/miner/miner-default'
end script
file /home/miner/miner-default
/home/miner/miner-default: symbolic link to `miner-user1'
miner-user1 Bash scrypt: #! /bin/sh
DISPLAY=:0 /home/miner/cgminer/cgminer -c /home/miner/cgminer-user1.conf
file /home/miner/cgminer
/home/miner/cgminer: symbolic link to `cgminer-2.6.1-x86_64-built'
Also the X server start-up: cat /etc/init/xserver.conf
description "Start X Server only for mining"
start on runlevel [2345]
stop on runlevel [!2345]
kill timeout 30
script
exec /usr/bin/X 2>&1
end script
Only SSH access to my rigs... Cheers! Thiago |
|
|
|
Hi! For my two 5870 @ 930 / 1300, I'm getting: GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer --scrypt -o http://MY_IP:9327 -u ltc5870.2 -p X --shaders 1600 -I 17 ~300kH from each NiceIf I run with: GPU_MAX_ALLOC_PERCENT=100, I see: [2012-07-30 16:21:05] Error -5: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
[2012-07-30 16:21:05] GPU 1 failure, disabling!
GPU0 seems to work with GPU_MAX_ALLOC_PERCENT... Any better setup for 5870s?! On top on Ubuntu 12.04 64 bits, Catalyst 12.6 and SDK v2.6. Tks! Thiago |
|
|
|
That's pretty specific.
A cron job is probably best suited for this, since all you asking you can control with the API.
Good point! Tks! |
|
|
|
Can I mine litecoins with CPU in cgminer? Or only with GPU?
Only with GPU. Time for a new bounty for a CGMiner with Litecoin CPU support, maybe using Pooler's code?! If I compile CGMiner 2.6.1 with enable-cpu, the Scrypt hashrate will be equal/comparable to current minerd hashrate? Anyway, I'll test it latter... |
|
|
|
This line works, but slow: GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 1 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan -I 15 --thread-concurrency 8192 -g 4 And manually setting as your said, solves the issue: GPU_MAX_ALLOC_PERCENT=100 GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 4 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan -I 15 --thread-concurrency 8192 But max is 360Kh out of my 7970... I was hitting +500kH few days ago from it... :-/ Best, Thiago Your intensity is too high. 7970 maxes out at intensity 13. YAY! Thank you! Perfect line for my 7970: GPU_MAX_ALLOC_PERCENT=100 GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://quilombas.com:9327 -u 7970.master2 -p x --scrypt -g 4 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan -I 13 --thread-concurrency 8192 --auto-fan --auto-gpu
= ~594Kh |
|
|
|
....
Check the new readme included it has lots of information. Try --shaders 2048 and -g 1 to begin with, then slowly increase -g if it doesn't crash.
Sure! I've read that... And played with those numbers, always same result... I'll try a old cgminer-2.5.0 compiled from git that I have in some flashdrive around here, it was working before... I was getting +500kH with this same 7970 card... Same drivers/sdk/etc... Thanks anyway! Cheers! Thiago Try manually setting the thread concurrency multiples of 2048 This line works, but slow: GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 1 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan -I 15 --thread-concurrency 8192 -g 4 And manually setting as your said, solves the issue: GPU_MAX_ALLOC_PERCENT=100 GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 4 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan -I 15 --thread-concurrency 8192 But max is 360Kh out of my 7970... I was hitting +500kH few days ago from it... :-/ Best, Thiago |
|
|
|
....
Check the new readme included it has lots of information. Try --shaders 2048 and -g 1 to begin with, then slowly increase -g if it doesn't crash.
Sure! I've read that... And played with those numbers, always same result... GPU_MAX_ALLOC_PERCENT=100 GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer/cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 1 --shaders 2048 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan
........................
7fa5f248d000-7fa5f268c000 ---p 00028000 fc:01 4104 /usr/lib/x86_64-linux-gnu/libwind.so.0.0.0
7fa5f268c000-7fa5f268d000 r--p 00027000 fc:01 4104 /usr/lib/x86_64-linux-gnu/libwind.so.0.0.0
7fa5f268d000-7fa5f268e000 rw-p 00028000 fc:01 4104 /usr/lib/x86_64-linux-gnu/libwind.so.0.0.0
7fa5f268e000-7fa5f2691000 r-xp 00000000 fc:01 10924 /lib/x86_64-linux-gnu/libkeyutils.so.1.4
7fa5f2691000-7fa5f2890000 ---p 00003000 fc:01 10924 /lib/x86_64-linux-gnu/libkeyutils.so.1.4
7fa5f2890000-7fa5f2891000 r--p 00002000 fc:01 10924 /lib/x86_64-linux-gnu/libkeyutils.so.1.4
7fa5f2891000-7fa5f2892000 rw-p 00003000 fc:01 10924 /lib/x86_64-linux-gnu/libkeyutils.so.1.4
7fa5f2892000-7fa5f2895000 r-xp 00000000 fc:01 10908 /lib/x86_64-linux-gnu/libgpg-error.so.0.8.0
7fa5f2895000-7fa5f2a94000 ---p 00003000 fc:01 10908 /lib/x86_64-linux-gnu/libgpg-error.so.0.8.0
7fa5f2a94000-7fa5f2a95000 r--p 00002000 fc:01 10908 /lib/x86_64-linux-gnu/libgpg-error.so.0.8.0
7fa5f2a95000-7fa5f2a96000 rw-p 00003000 fc:01 10908 /lib/x86_64-linux-gnu/libgpg-error.so.0.8.0
7fa5f2a96000-7fa5f2aa7000 r-xp 00000000 fc:01 10912 /usr/lib/x86_64-linux-gnu/libp11-kit.so.0.0.0
7fa5f2aa7000-7fa5f2ca6000 ---p 00011000 fc:01 10912 /usr/lib/x86_64-linux-gnu/libp11-kit.so.0.0.0
7fa5f2ca6000-7fa5f2ca7000 r--p 00010000 fc:01 10912 /usr/lib/x86_64-linux-gnu/libp11-kit.so.0.0.0
7fa5f2ca7000-7fa5f2ca8000 rw-p 00011000 fc:01 10912 /usr/lib/x86_64-linux-gnu/libp11-kit.so.0.0.0
7fa5f2ca8000-7fa5f2cb8000 r-xp 00000000 fc:01 19048 /usr/lib/x86_64-linux-gnu/libtasn1.so.3.1.1Aborted (core dumped)
I'll try a old cgminer-2.5.0 compiled from git that I have in some flashdrive around here, it was working before... I was getting +500kH with this same 7970 card... Same drivers/sdk/etc... Thanks anyway! Cheers! Thiago |
|
|
|
Hi! I have 1 7970, running cgminer 2.6.1 for Bitcoin smoothly. When I try it for Litecoin, it just crash... cd cgminer-2.6.1-x86_64-built
GPU_MAX_ALLOC_PERCENT=100 GPU_USE_SYNC_OBJECTS=1 DISPLAY=:0 ./cgminer -o http://MY_IP:9327 -u 7970.master2 -p x --scrypt -g 5 --gpu-engine 1135 --gpu-memclock 1375 --auto-gpu --auto-fan
.......
Aborted (core dumped)
Even if I halt and start the machine, it doesn't work...  I'm using CGMiner 2.6.1, Ubuntu 12.04 64 bits, Catalyst 12.6 and SDK v2.6. I appreciate any help! Thanks! Thiago |
|
|
|
|
Show Posts
