|
doktor83 (OP)
|
 |
November 01, 2018, 08:11:23 PM |
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
need much more info, like config file and pool, is it Monero Ocean? All i see on the log is that miner switched algo to V8 and all gpu's were initialised. |
|
|
|
Uaciuganadu
Newbie
 Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 08:26:43 PM |
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
need much more info, like config file and pool, is it Monero Ocean? All i see on the log is that miner switched algo to V8 and all gpu's were initialised. Hello Dok, Yes it is MoneroOcean. Here is all the info that i can gather: setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
cls
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set LOGTIME=%dt:~0,4%_%dt:~4,2%_%dt:~6,2%_%dt:~8,2%_%dt:~10,2%_%dt:~12,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt
SRBMiner-CN.exe --config Config\config-normalv8.txt --pools pools-algoswitch.txt --logfile al_sw_%LOGTIME% --usealgoswitching --apienable --apiport 8888 --algoswitchmintime 60 --resetmineronalgoswitch --forcedshutdown --gpuerrorsalert 10 {
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 58, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2}
]
}Here is also the before algo switch part: [2018-11-01 19:12:23] miner_result: Pool accepted result 0x00000C8C
[2018-11-01 19:13:37] hashrate: GPU0: 1664 H/s [BUS:6]
[2018-11-01 19:13:37] hashrate: GPU1: 4358 H/s [BUS:9]
[2018-11-01 19:13:37] hashrate: GPU2: 4013 H/s [BUS:3]
[2018-11-01 19:13:37] hashrate: Total: 10035 H/s
[2018-11-01 19:14:07] miner_result: Sending user result to pool
[2018-11-01 19:14:07] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"9f854439-7175-4484-857c-2e269bb611fe","job_id":"XnL9Z1tpMADL6pchdvgee27GVYdh","nonce":"56245b55","result":"8690bfce43bc39d95f3c799424eed05ed09e22c586e3529a554c4c303b250000","algo":"cn/msr"}}
[2018-11-01 19:14:07] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-01 19:14:07] miner_result: Pool accepted result 0x0000253B
[2018-11-01 19:14:32] miner_result: Sending user result to pool
[2018-11-01 19:14:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"9f854439-7175-4484-857c-2e269bb611fe","job_id":"XnL9Z1tpMADL6pchdvgee27GVYdh","nonce":"e92ead2a","result":"3c51abaa1bebf0cfd1bfe390a53182247cf8a3086166f67e025a7b3078050000","algo":"cn/msr"}}
[2018-11-01 19:14:33] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-01 19:14:33] miner_result: Pool accepted result 0x00000578
[2018-11-01 19:15:37] hashrate: GPU0: 1664 H/s [BUS:6]
[2018-11-01 19:15:37] hashrate: GPU1: 4359 H/s [BUS:9]
[2018-11-01 19:15:37] hashrate: GPU2: 4014 H/s [BUS:3]
[2018-11-01 19:15:37] hashrate: Total: 10037 H/s
[2018-11-01 19:16:33] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707f0e9ecde052eab8922c9b0af7ed8221b276d0772a4a6f4339d75e3ea71f88dedb57738a5ee000000000b40cf5e95539d38a77e184d6b1ac203bc3273790356ef2d861042d29aa28f8f06","algo":"cn/msr","variant":"msr","job_id":"STVJ6+uLiMruqeLtHisVh40wdN9z","target":"8a330000","id":"9f854439-7175-4484-857c-2e269bb611fe"}}
[2018-11-01 19:16:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909a9e9ecde05b7718ace0f6f876881dcaf0b3dcfc5f83a011b4996db1e8a1f3376a593ba7c50000000004529dfdd46303bbbb9c3c72d5c487b69967c43d8bd7245629f6538919700382002","algo":"cn/2","variant":"2","job_id":"lo+EIlC3lfoB1YzY5uyG84rqVlBi","target":"8a330000","id":"9f854439-7175-4484-857c-2e269bb611fe"}}
[2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
Is there any way to make the log more detailed for debug? |
|
|
|
|
|
doktor83 (OP)
|
|
November 01, 2018, 09:15:27 PM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
|
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 01, 2018, 10:29:13 PM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
} |
|
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 01, 2018, 11:38:17 PM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed: https://i.imgur.com/Sxk4zwu.pngEdit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... |
|
|
|
|
|
doktor83 (OP)
|
|
November 02, 2018, 04:40:44 AM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed:  Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... you need to cool those vegas, set the fan to 3000rpm. That is why the hashrate drops, hbm gets too hot |
|
|
|
|
doktor83 (OP)
|
|
November 02, 2018, 05:37:05 AM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
}OK, so no 'cryptonight_type' set here for MO. That's good. Maybe you could try dropping the --forcedshutdown, and let the miner release the gpu resources before restarting, let's see is that going to help. |
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 02, 2018, 08:30:18 AM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed: https://i.imgur.com/Sxk4zwu.pngEdit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... you need to cool those vegas, set the fan to 3000rpm. That is why the hashrate drops, hbm gets too hot Both are pretty much the same temps wise, maybe the upper one has a degree more.. Much better now since I switched to the Threadripper platform and there's more space between them, on the mainstream Ryzen mobo they were too close. |
|
|
|
|
|
BogdanCo
|
|
November 02, 2018, 08:38:31 AM |
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed: Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... you need to cool those vegas, set the fan to 3000rpm. That is why the hashrate drops, hbm gets too hot Both are pretty much the same temps wise, maybe the upper one has a degree more.. Much better now since I switched to the Threadripper platform and there's more space between them, on the mainstream Ryzen mobo they were too close. Use Soft Power Play Tables to get Memory to 1100 Mhz if possible and also voltages a little down, you should get ~1900 H/s out of one Vega and temp around 50 degrees Celsius (depends of the Vega model). Keep in mind the HBM is ~10 degrees hotter than what you see on the screen. |
|
|
|
|
Gtx1070rig
Jr. Member
Offline
Activity: 56
Merit: 4
|
|
November 02, 2018, 09:37:50 AM |
|
I got a rly weird problem...
3 of my 6 rx 580s have elpida mem...
randomly i got similar results
``[2018-10-31 19:18:12] GPU0 : 950 H/s [T: 56c, RPM: 1264, CC: 1200 MHz, MC: 2050 MHz][BUS:1]
[2018-10-31 19:18:12] GPU1 : 955 H/s [T: 61c, RPM: 1071, CC: 1200 MHz, MC: 2050 MHz][BUS:2]
[2018-10-31 19:18:12] GPU2 : 956 H/s [T: 56c, RPM: 1038, CC: 1200 MHz, MC: 2050 MHz][BUS:3]
[2018-10-31 19:18:12] GPU3 : 951 H/s [T: 55c, RPM: 1251, CC: 1200 MHz, MC: 2050 MHz][BUS:6]
[2018-10-31 19:18:12] GPU4 : 951 H/s [T: 57c, RPM: 1109, CC: 1200 MHz, MC: 2050 MHz][BUS:7]
[2018-10-31 19:18:12] GPU5 : 955 H/s [T: 56c, RPM: 1001, CC: 1200 MHz, MC: 2050 MHz][BUS:8]``
with little higher voltage on mem then on samsung mem cards...
But mostly i got these results with the same oc settings:
``[2018-11-01 18:00:48] GPU0 : 952 H/s [T: 60c, RPM: 1262, CC: 1200 MHz, MC: 2050 MHz][BUS:1]
[2018-11-01 18:00:48] GPU1 : 952 H/s [T: 63c, RPM: 1252, CC: 1200 MHz, MC: 2050 MHz][BUS:2]
[2018-11-01 18:00:48] GPU2 : 933 H/s [T: 70c, RPM: 999, CC: 1200 MHz, MC: 2050 MHz][BUS:4]
[2018-11-01 18:00:48] GPU3 : 953 H/s [T: 64c, RPM: 1137, CC: 1200 MHz, MC: 2050 MHz][BUS:5]
[2018-11-01 18:00:48] GPU4 : 931 H/s [T: 67c, RPM: 1142, CC: 1200 MHz, MC: 2050 MHz][BUS:6]
[2018-11-01 18:00:48] GPU5 : 932 H/s [T: 70c, RPM: 1256, CC: 1200 MHz, MC: 2050 MHz][BUS:7]
[2018-11-01 18:00:48] Total: 5640 H/s``
I flashed all with Bios One Time Click... The Samsung cards work great...
Anything i can do, do get similar results instead of losing around 20H/s (v8) per card?
or lost i the silicon lottery?^^
|
|
|
|
|
|
|
Alcahest
Newbie
Offline
Activity: 37
Merit: 0
|
|
November 02, 2018, 01:44:15 PM |
|
Hello ! I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8. Here is my pools config : {
"pools" :
[
{
"pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367",
"wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31",
"password" : "x",
"worker" : "D31"
},
{
"pool" : "xmr-eu2.nanopool.org:14444",
"wallet" : "42obT6dQSrC8YuP885n8mU6aHjcMzoFAyXqiSuB1JXmyUDYXTZSMfz5WbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm42dDYs6.D31",
"password" : "x"
}
]
} My rig can't connect to my two pools, i have different errors : "connection to pool lost", "could not login user to pool, try again" or "cant' connect to xxx pool" Here is a screenshot : http://www.noelshack.com/2018-44-5-1541165408-srb.jpgI have verified my firewall and antivirus configuration and all is OK... Do you have any idea ? Thank you for your help! |
|
|
|
|
tg88
Legendary
Offline
Activity: 2730
Merit: 1744
|
|
November 02, 2018, 02:23:29 PM |
|
Hello !
I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8.
Here is my pools config :
Take a test with this syntax. {
"pools" :
[
{"pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"},
{"pool" : "xmr-eu2.nanopool.org:14444", "wallet" : "42obT6dQSrC8YuP885n8mU6aHjcMzoFAyXqiSuB1JXmyUDYXTZSMfz5WbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm42dDYs6.D31", "password" : "x"}
]
} |
|
|
|
|
Alcahest
Newbie
Offline
Activity: 37
Merit: 0
|
|
November 02, 2018, 02:30:30 PM |
|
Thank you for your help but also with your syntax it doesn't work  |
|
|
|
|
logicus
Newbie
Offline
Activity: 57
Merit: 0
|
|
November 02, 2018, 04:55:39 PM |
|
Hello !
I have a problem with my rig (8 x RX VEGA 56) and SRB Miner on cryptonight v8.
Try this pools config : { "pools" : [ {"pool" : "stratum+tcp://cryptonightv8.eu.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"}, {"pool" : "stratum+tcp://cryptonightv8.usa.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"}, {"pool" : "stratum+tcp://cryptonightv8.jp.nicehash.com:3367", "nicehash" : true, "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x"} ] } |
|
|
|
|
solutions4w
Newbie
Offline
Activity: 7
Merit: 1
|
|
November 02, 2018, 05:04:19 PM |
|
This one works for me:
{
"pools" :
[
{"pool" : "cryptonightv8.eu.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true},
{"pool" : "cryptonightv8.usa.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true},
{"pool" : "cryptonightv8.jp.nicehash.com:3367", "wallet" : "36GWXKPs3fp2RWbB2qc7fREss653c6o5nL.D31", "password" : "x", "nicehash" : true}
]
}
|
|
|
|
|
Alcahest
Newbie
Offline
Activity: 37
Merit: 0
|
|
November 02, 2018, 06:33:37 PM |
|
Thank you for your help but it doesn't work...
Do you think it could be a problem of firewall ?
|
|
|
|
|
|
Bojcha
|
|
November 02, 2018, 07:27:09 PM |
|
Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...
ppt does not get memory to ~1100MHz. |
|
|
|
|
wgestickley
Newbie
Offline
Activity: 76
Merit: 0
|
|
November 02, 2018, 08:48:50 PM |
|
Hi Doc,
I maybe found a Bug in latest Miner and Profit switching. In my config, I set in each the 5 min average hashrate for restart, but when Miner switch from a higher HR Algo (fast) to a slower one (maybe haben) it does not reset the values and restart the Miner with the text that average HR is lower than defined.
Can you please check it? After the Algo switch Miner should load the average HR value and reset the average numbers...
Oliver
|
|
|
|
|
|
BogdanCo
|
|
November 02, 2018, 10:49:19 PM |
|
Use Soft Power Play Tables to get Memory to 1100 Mhz if possible...
ppt does not get memory to ~1100MHz. Then what gets memory to 1100Mhz? |
|
|
|
|
|
