SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[doktor83]

Hi, where can I get MD5 hashes for older versions?

Nowhere, i always put the md5 for the actual version only.
If you download from one of the official links from the first page you can be sure it's 100% legit.

[1715138752]

1715138752

[1715138752]

1715138752

[1715138752]

1715138752

[Markyz23]

I'm getting this error when starting SRB Miner or after a while of mining.

Can somebody point me in the right direction?

While mining:
Error CL_OUT_OF_RESOURCES when calling clEnqueueNDRangeKernel for kernel 2 for DeviceID 5

When starting SRB Miner:
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 5

10 Gpu rig, 8GB RAM, 64 GB of virtual memory.

The error occurse on my RX 570 4GB. I have 3 of those and only one is making me problems.

Solution?

[dragonmike]

I'm getting this error when starting SRB Miner or after a while of mining.

Can somebody point me in the right direction?

While mining:
Error CL_OUT_OF_RESOURCES when calling clEnqueueNDRangeKernel for kernel 2 for DeviceID 5

When starting SRB Miner:
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 5

10 Gpu rig, 8GB RAM, 64 GB of virtual memory.

The error occurse on my RX 570 4GB. I have 3 of those and only one is making me problems.

Solution?

Do you have that problem with other mining softwares too?
I had one of my RX570's fail when put under OpenCL load. Was working fine for everything else, including gaming... But as soon as it started mining... BOOM. Had to return it. Got refunded.

[Markyz23]

I'm getting this error when starting SRB Miner or after a while of mining.

Can somebody point me in the right direction?

While mining:
Error CL_OUT_OF_RESOURCES when calling clEnqueueNDRangeKernel for kernel 2 for DeviceID 5

When starting SRB Miner:
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 5

10 Gpu rig, 8GB RAM, 64 GB of virtual memory.

The error occurse on my RX 570 4GB. I have 3 of those and only one is making me problems.

Solution?

Do you have that problem with other mining softwares too?
I had one of my RX570's fail when put under OpenCL load. Was working fine for everything else, including gaming... But as soon as it started mining... BOOM. Had to return it. Got refunded.

No problems before. I speculate that after closing the miner the memory does not get cleaned. But I don't know why it happens when mining for a while. Anybody any ideas?

[dingdongtobias]

I'm getting this error when starting SRB Miner or after a while of mining.
When starting SRB Miner:
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 5

Solution?

First page :

) If you get a "Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel" error, increase virtual memory.

[dragonmike]

I will check this fast algo thing.

You guys have enough size for pagefile?

Same issue here. Plenty of size for the pagefile too.

Is this happening only on vegas?

Yes.
I can confirm my 14 RX 570's are mining CNfast at the exact same speed. It's the Vegas that are temperamental.

[killfrenzy]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

[dragonmike]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

You haven't enabled compute mode in the driver.

[killfrenzy]

enebled by AMD-Compute mode switch utility...

[Pandoraaaaa]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

[SpceGhst]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

Read post #3 in this thread.  What isn’t answered there can be found here...http://vega.miningguides.com/

[Pandoraaaaa]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

Read post #3 in this thread.  What isn’t answered there can be found here...http://vega.miningguides.com/

Thank you for the response. I am using those resources! My biggest problem is that I can't control the fan or power the way I can on my other cards (rx) - Afterburner doesn't work and Overdriventool is also giving error messages.

I currently have driver 18.5.1 installed but I will put on a newer one and try it. I'll also try the tweaks in step 3 to try to raise my hashrate, currently 1.3k on heavy.

[dingdongtobias]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

580 8G card have higher hash on heavy then on v7

[dingdongtobias]

Hello, I am looking for some help setting up Vega FE, any experts here? My hashrate is only 1.2k and my temps are over 80. I am mining heavy algo and I've tried 18.6.4 driver and 18.5.1 driver.

I have so many questions! Example: is there crossfire that I should disable? Nothing is showing up in amd settings.

Also afterburner can't change fan speed or reduce power. Overdriventool gave an error when I tried to change max temp too.

I am lost.

Read post #3 in this thread.  What isn’t answered there can be found here...http://vega.miningguides.com/

Thank you for the response. I am using those resources! My biggest problem is that I can't control the fan or power the way I can on my other cards (rx) - Afterburner doesn't work and Overdriventool is also giving error messages.

I currently have driver 18.5.1 installed but I will put on a newer one and try it. I'll also try the tweaks in step 3 to try to raise my hashrate, currently 1.3k on heavy.

set intensity 96

[killfrenzy]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

580 8G card have higher hash on heavy then on v7

but people have hashrate nearly to 1100 H/s on CN-v7, how they do this???

[doktor83]

I will check this fast algo thing.

You guys have enough size for pagefile?

Same issue here. Plenty of size for the pagefile too.

Is this happening only on vegas?

Yes.
I can confirm my 14 RX 570's are mining CNfast at the exact same speed. It's the Vegas that are temperamental.

Is this happening on previous miner versions too? Can someone confirm.

[fapar]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

580 8G card have higher hash on heavy then on v7

but people have hashrate nearly to 1100 H/s on CN-v7, how they do this???

I have a similar question because my RX480 have 840 H/s at 1310/2000MHz. A higher memory frequency does not increase speed.

[doktor83]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

580 8G card have higher hash on heavy then on v7

but people have hashrate nearly to 1100 H/s on CN-v7, how they do this???

I have a similar question because my RX480 have 840 H/s at 1310/2000MHz. A higher memory frequency does not increase speed.

Tried intensity 57-58 on v7?

[killfrenzy]

doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?

580 8G card have higher hash on heavy then on v7

but people have hashrate nearly to 1100 H/s on CN-v7, how they do this???

I have a similar question because my RX480 have 840 H/s at 1310/2000MHz. A higher memory frequency does not increase speed.

Tried intensity 57-58 on v7?

Yes!!! i have 3 cards rx580 1-nitro+ 2- nitro+SE 3- pulse
they all have very low hashrate 700-850H/s on CN-v7
on CN-heavy i have 1000-1100 H/s easy!!!

[playfast]

If you got problems with low hashrate you could try .srb file generated from an older version and use that old .srb file with current software.
I personally get best results using the .srb from 1.5.8 with any 1.6.x
Run 1.5.8 until you get a hashrate you're happy with, then rename the 1.5.8 .srb to the exact name as your 1.6.x .srb and overwrite it, hopefully you get an improved hashrate on 1.6.x