GekkoScience Compac BM1384 Stickminer Official Support Thread

[boymoku]

Sorry Mr.ZedZedNova

i Read the first post and do that but i has a problem ...

when i install the winusb driver for the compac(s) and i double click cgminer for run program

it show me that pic ...

http://image.free.in.th/v/2013/ia/160727114525.jpg

and close program

=========

Could u tell me please ..what i mistake

thank u 

[MrBogy]

Greetings Boymoku.

Simply go to page 104 of this thread and you'll find a clue to your solution.

Cheers.

[boymoku]

Greetings Boymoku.

Simply go to page 104 of this thread and you'll find a clue to your solution.

Cheers.

Thank u Mr.MrBogy . your suggestion makes me run that perfect

https://i.imgur.com/Hk6Ebro.jpg


And i ask somthing ... How can i change

user 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr

belong to my account =>> boymoku

thank u again.. and sorry for poor english

[Mikestang]

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one.  If you post up your batch file we can show you exactly what needs to change.

[boymoku]

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one.  If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..


cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150


=====

sorry i new and i read #1 post  but i dont understand

[ZedZedNova]

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one.  If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..


cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150


=====

sorry i new and i read #1 post  but i dont understand

Change what is in bold to your bitcoin address or username depending on what the pool you are using requires.

Cheers,

- zed

[boymoku]

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one.  If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..


cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150


=====

sorry i new and i read #1 post  but i dont understand

Change what is in bold to your bitcoin address or username depending on what the pool you are using requires.

Cheers,

- zed

Hello Mr.ZedZedNova

             i download and register in web  https://electrum.org/#download

             and i got my  bitcoin address == 1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS

             when i replace in that

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150

i change my

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS --compac-freq 150

and run it but it show this

https://i.imgur.com/bHX9mdu.jpg


what wrong How i can fix


thank u very much
            

 

[irritant]

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

[boymoku]

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

Hello Mr.irritant .. sorry i mistake that . now i reclick and it run

https://i.imgur.com/uogXBfq.jpg


Can i ask you  , What line what point in this pic show when i got bitcoin

..umm How i know that i get Bitcoin when i run this program
How can i check ??

Thank you sir.

[Unacceptable]

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

Hello Mr.irritant .. sorry i mistake that . now i reclick and it run




Can i ask you  , What line what point in this pic show when i got bitcoin

..umm How i know that i get Bitcoin when i run this program
How can i check ??

Thank you sir.

Here are your earnings on the Eligius pool page  

Add it to your favorites in your browser & you can check anytime you want 

http://eligius.st/~wizkid057/newstats/userstats.php/1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS

[boymoku]

Thank you Mr.Unacceptable

And Can i ask you something..

i use program call MinerGate v6.3  by this pic


https://i.imgur.com/4wfSNzF.jpg


IF i need use my  GekkoScience Compac BM1384 Stickminer for digging ETH bitcoin by that pic

How can i set program cgminer_run


thank you

[Unacceptable]

Thank you Mr.Unacceptable

And Can i ask you something..

i use program call MinerGate v6.3  by this pic





IF i need use my  GekkoScience Compac BM1384 Stickminer for digging ETH bitcoin by that pic

How can i set program cgminer_run


thank you

You can't mine Eth with that device it is for SHA 256 coins only 

You need a good video card like AMD 7800 series (some Nvidia cards work too) & up to mine Eth 

[cozyfurf]

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
 [2016-07-30 21:25:46.553] Probing for an alive pool
 [2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
 [2016-07-30 21:25:47.554] Network diff set to 485M
 [2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
 [2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
 COMPAC 0: Device failed to respond to restart
 [2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

[CjMapope]

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
 [2016-07-30 21:25:46.553] Probing for an alive pool
 [2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
 [2016-07-30 21:25:47.554] Network diff set to 485M
 [2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
 [2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
 COMPAC 0: Device failed to respond to restart
 [2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

the problem there is cgminer is thinking the stick is dead because the pool difficulty is too high so your not getting a share within a min or 2 (so its resetting it)
the solution is to find a lower difficulty port for that coin, and if u can't get lower dif port you will need to find an "easier" pool to mine at ;/

hope that helps
your technically not "doing anything wrong" the difficulty of that pool is just too high for your little stick ;/ ( its at 8192, you need like 8 )

[zOU]

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
 [2016-07-30 21:25:46.553] Probing for an alive pool
 [2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
 [2016-07-30 21:25:47.554] Network diff set to 485M
 [2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
 [2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
 COMPAC 0: Device failed to respond to restart
 [2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

just unplug replug the miner while cgminer is running

[CjMapope]

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
 [2016-07-30 21:25:46.553] Probing for an alive pool
 [2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
 [2016-07-30 21:25:47.554] Network diff set to 485M
 [2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
 [2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
 COMPAC 0: Device failed to respond to restart
 [2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

just unplug replug the miner while cgminer is running

but if the difficulty is still 8192, won't cgminer just do the same thing in a few mins without shares submitted even IF he just "replugs the miner"?
cause isn't it doing that because of the high dif?
just saying, telling someone to "reboot it" dosen't really give a solution is all haha

[sidehack]

The pool's diff has nothing to do with shares detected within cgminer. Pretty sure that's been gone over two or three times in this thread already. Your advice is fallacious.

[CjMapope]

The pool's diff has nothing to do with shares detected within cgminer. Pretty sure that's been gone over two or three times in this thread already. Your advice is fallacious.

ahh well good to know then, ty

ill have to re-read some shit on here to be more clear on why it does that ;;p

[sidehack]

Bitmain's chip submits all diff-1 and greater shares, which is why the Compac's LED flashes as frequently as it does. Cgminer's activity timeout is based on the hashrate and the expected time between diff-1 shares, so if it detects no shares (or only errors) within that time it assumes the chip is having problems and attempts to reset the device. The vardiff sent by the pool only affects what shares cgminer sends to the pool, not what shares the Compac sends to cgminer.

[Percivul]

These don't seem to work at all in a USB 3.0 hub.

I bought one and it works fine on USB 2.0 but 3 is a no go.  Any thoughts?

Drivers?  Yes, I used Zadic and the driver installed fine.
Powered?  It's an Anker, so yes.
USB hub works?  Yes, I have other devices on it that are working fine.
Software?  cgminer (Gekko release) and bfgminer (latest).
Works at all?  Only in the USB 2.0 ports of my PC.  The hub(s) (I have 2 different ones) are a no go.

If I can get these to work on USB 3, I'll be happy to buy a few more.

Thanks