Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[yun9999]

To answer the question above, no you don't need matching PSU.  You can mix and match.

Anyone have 4 or more Nvidia running on the same rig mining with Claymore?  I can get 3 to work together but when it's 4 or above it would crash with those errors about FANs and stuff.  Doesn't matter if it's version 6.2 or 6.4

[duboisi]

Hi Claymore, can the dual miner be used for Miningpoolhub's port 17020 (Etash auto switching stratum port)? TQ.

[Mishka77]

Hi. What configuration for dcr mining for Claymore?
On pools - faq is only for other miners(and other setting).
I set settings to -dpool dcr.coinmine.pl:2999 -dwal Mishka77.rig1 -dpsw xxx(here is my pass), and i have connect to pool, but do not accept shares and have 0.0 Mh speed.

I create account, create workers in my personal account, and rechecked all settings, but the problem is still there.

[Strannik-74]

To answer the question above, no you don't need matching PSU.  You can mix and match.

Anyone have 4 or more Nvidia running on the same rig mining with Claymore?  I can get 3 to work together but when it's 4 or above it would crash with those errors about FANs and stuff.  Doesn't matter if it's version 6.2 or 6.4

v6.3 work fine

[ethermine.rocks]

can you make it work with parity client for solo?

[Claymore]

Hi Claymore, can the dual miner be used for Miningpoolhub's port 17020 (Etash auto switching stratum port)? TQ.

Search for "Miningpoolhub" in this thread, for example:
https://bitcointalk.org/index.php?topic=1433925.msg15782308;topicseen#msg15782308

can you make it work with parity client for solo?

It works already.

[antantti]

can you make it work with parity client for solo?

It works already.

Does it work with sammy007's proxy?

https://github.com/sammy007/ether-proxy

If so what is the connection string?

[Claymore]

can you make it work with parity client for solo?

It works already.

Does it work with sammy007's proxy?

https://github.com/sammy007/ether-proxy

If so what is the connection string?

I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.

[antantti]

can you make it work with parity client for solo?

It works already.

Does it work with sammy007's proxy?

https://github.com/sammy007/ether-proxy

If so what is the connection string?

I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.

Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99

I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.

So problem is only the right syntax to connect to proxy.

-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!

[Claymore]

can you make it work with parity client for solo?

It works already.

Does it work with sammy007's proxy?

https://github.com/sammy007/ether-proxy

If so what is the connection string?

I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.

Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99

I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.

So problem is only the right syntax to connect to proxy.

-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!

Please share your command line that works, so people can see working config.

[antantti]

can you make it work with parity client for solo?

It works already.

Does it work with sammy007's proxy?

https://github.com/sammy007/ether-proxy

If so what is the connection string?

I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.

Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99

I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.

So problem is only the right syntax to connect to proxy.

-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!

Please share your command line that works, so people can see working config.

Code:

EthDcrMiner64.exe -epool http://192.168.0.1:8546/miner/diff/rigname

Where ip points to rig where you are running proxy at. Diff and rigname can be anything you like just don't touch that /miner part. No need to play with user/ pass or esm settings.

So for example

Code:

EthDcrMiner64.exe -epool http://192.168.0.177:8546/miner/20/hawaii

[ioglnx]

I have a strange issue. I mined with Claymore Dual GPU miner at nanopool.org.
I have submitted 11 shares with it but non is shown by the pool that they received it - its now 1h ago.

With gnoil it instantly shown in my stats...please what happened to my shares?

From the log...
13:33:19:180    1ed4    args: -epool eth-eu1.nanopool.org:9999 -ewal 0x1873d78519d4216a1e5f5xxx -r 0 -mode 1
13:33:19:181    1ed4

ETH: 09/02/16-14:05:00 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 22.215 Mh/s, Total Shares: 11, Rejected: 0, Time: 00:31
ETH: GPU0 22.250 Mh/s

13:59:44:152   2d9c   ETH: GPU0 22.106 Mh/s
13:59:50:647   14fc   ETH: put share nonce 1eb2d7e0042d33f5
13:59:50:647   14fc   ETH round found 1 shares
13:59:50:648   2d9c   ETH: 09/02/16-13:59:50 - SHARE FOUND - (GPU 0)
13:59:50:742   2d9c   send: {"id":4,"method":"eth_submitWork","params":["0x1eb2d7e0042d33f5","0xb15ba24250ed9fe5ad4e62619c67fa21f9f3047c3fef5708a7104d74cc6c6a6b","0xede8c8540ae7d3eeca3f1bc2dc6b807983970f63281cc2381f81a74d2d16c17b"]}

13:59:50:796   2d9c   got 39 bytes
13:59:50:796   2d9c   buf: {"jsonrpc":"2.0","id":4,"result":true}

13:59:50:796   2d9c   parse packet: 38
13:59:50:797   2d9c   ETH: Share accepted (62 ms)!

[vapourminer]

nanopool with cdm is pretty much the same, shares show up within a couple minutes if not sooner.

i think somethings up with the website part of nanopool. says my last share was 11 hours ago but both my miners are still getting work and submitting shares that are accepted.

occasionally that happens to pools. web part and backend that does the work are different beasts., so one can go wonky while the other keeps trucking.  the backend keeps track of shares while the frontend web part just displays it. so the shares are there, just not displayed, at least thats what ive seen in the past when stuff like this happens at other pools.  might want to just wait it out. nanopool and cdm have been reliable for me months.

[ioglnx]

Well I started genoil miner and it is shown ..
instantly so nothing wrong with the pool.

Somehwere my processing power ended up but my shares didn't reach nanopool.org nor any other pool i have in the epool.txt. So please Claymore enlighten me where my shares are gone.
I can provide you the log.

[PontiacGTX]

Claymore do you think Groelst or NooScrypt Can be added for dual mining?

[Raja_MBZ]

Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?

[vapourminer]

put it in the startup folder. has to be a .bat file though.

[Naimon]

Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?

Yes, there is.  The best way I've found is to use a Scheduled Task.  Press your start button, search for Task Scheduler, and create a new task.  Set the trigger to run at logon, and set the action to be start a program.  Then, just link to the Claymore executable.  Store all your settings in the conf and pools text files, and you'll be good to go.

If you need more detailed instructions than that, google "How to create a Scheduled Task in Windows 10"

[fittsy]

Claymore do you think Groelst or NooScrypt Can be added for dual mining?

GRS is dying. Do not add it to Claymore.

[fittsy]

Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?

1. Automatically login to Windows 10 when the computer boots.
https://www.cnet.com/how-to/automatically-log-in-to-your-windows-10-pc/

2. Use the claymore start.bat file to start Claymore.  You need to make a shortcut on the bat file. Right click and say "send to" then send to "desktop (create shortcut)". Then go to run and type "shell:startup". Copy and paste the shortcut from your desktop into this folder.
http://www.computerhope.com/issues/ch000322.htm