xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 03:25:44 AM |
|
Hey guys, Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it. It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thanks!! Confirm that port 8000 is open.... https://www.grc.com/x/ne.dll?rh1dkyd2Hey, Thank you for replying!! I do access all my rigs through remote desktop via virtual servers setup, opening ports isn't really much of a big deal, but I did double check on http://www.canyouseeme.org/ and the ports are open. Any ideas? Make sure port 8000 is going to that specific computer, and check if anything else is listening on that port. http://stackoverflow.com/questions/48198/how-can-you-find-out-which-process-is-listening-on-a-port-on-windowsI checked and there was nothing else listening on that port on the current machine runnning EthMan. Just to be 100% sure I just changed the port to 64000. I can confirm the new port is open externally, confirm it's working on the lan and confirm it's not working with the external IP:64000 Maybe I am missing something? -_- Thanks man It should work if port is being passed from router directly to your computers IP address. Only other thing I would check is local firewall. For checking active local ports, this is really good, just found it. TCPView https://technet.microsoft.com/en-us/sysinternals/bb897437.aspx
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 05:13:54 AM |
|
I have a GIGABYTE GA-Z170X-UD5 board, trying to boot 5 470/480s. I have them all on powered 1x-16x risers. It won't POST with 5 cards, but it will boot with 4 cards, mining now, 100% stable. Tried changing slots. Tried changing PCIE gen to 1, 2, and 3 in bios. Default display set to onboard. Is there a different setting I need to change? Looked through the bios, didn't see anything else. Is this a board that needs 16x risers if using more than 4 cards? If so, can someone link one that won't fry a card? Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813128838Risers http://r.ebay.com/xeJZCX PSU EVGA SuperNOVA 1200 P2
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
gribgo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 05:51:03 AM |
|
I think that we are going to see XMR+SIA with the next (7.0) version.. is that correct Claymore? peace
|
|
|
|
BogdanCo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 06:08:28 AM |
|
I have a GIGABYTE GA-Z170X-UD5 board, trying to boot 5 470/480s. I have them all on powered 1x-16x risers. It won't POST with 5 cards, but it will boot with 4 cards, mining now, 100% stable. Tried changing slots. Tried changing PCIE gen to 1, 2, and 3 in bios. Default display set to onboard. Is there a different setting I need to change? Looked through the bios, didn't see anything else. Is this a board that needs 16x risers if using more than 4 cards? If so, can someone link one that won't fry a card? Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813128838Risers http://r.ebay.com/xeJZCX PSU EVGA SuperNOVA 1200 P2 If you use more than 4 cards you need a MB with an extra molex 4 pin connector like this one: http://www.ebay.co.uk/itm/ASRock-H97-Anniversary-motherboard-ATX-LGA1150-Socket-H97ANNIVERSARY-/112016860002?hash=item1a14b9a362:g:EgEAAOSwv9hW2JckSo you can't boot with 5 cards because the MB doesn't have enough power for all your PCI-E cards.
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 06:23:02 AM |
|
Isn't that the point of the powered risers? The cards get all their power from molex directly connected to the riser circuit board. The only thing going to the motherboard is a USB cable from riser to 1x board for data. Motherboard power can really only power 2 or 3 cards anyway because the ATX plug only has 150W available. I have seen posts of people saying connecting molex to mobo is optional on that board anyway as long as you use powered risers.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
molitar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 06:52:11 AM |
|
Here is my current setup... GPU 0 Sapphire Vapor-X R9 280x GPU 1 Sapphire Nitro+ 8GB RX 480 GPU 2 XFX DD Black Edit 4GB 380x Current mining batch @echo off set GPU_FORCE_64BIT_PTR 0 set GPU_MAX_HEAP_SIZE 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100
@echo on EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner1 -esm 2 -epsw <pass> -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=<address>&worker=miner1&email=<email>" -dcoin sia -dcri 30 -allpools 1 -ethi 16,2,16 Now since I have a RX 480 now I have to use the Crimson driver is there any tweaks you an suggest? So far I have not figured how to tweak my RX 480 or reduce voltage on my R9 380x but I did custom edit my BIOS on my R9 280x? Does the above suggestion of having two different miners running on same system make sense or will the gain be too little? Also is there any other suggested tweak settings. HashRate ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FgHteDBo.png&t=665&c=LHnUzz2Y3oTrOg)
|
|
|
|
BogdanCo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 07:26:22 AM |
|
Isn't that the point of the powered risers? The cards get all their power from molex directly connected to the riser circuit board. The only thing going to the motherboard is a USB cable from riser to 1x board for data. Motherboard power can really only power 2 or 3 cards anyway because the ATX plug only has 150W available. I have seen posts of people saying connecting molex to mobo is optional on that board anyway as long as you use powered risers. Maybe you're right, but according to the manual of the MB if you use more than 4 GPU's you have to connect the molex... I own 3 of these MB and also powered risers, but never tried the cards without connecting the 4 pin molex.
|
|
|
|
Yassarsian
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 08:10:51 AM |
|
Isn't that the point of the powered risers? The cards get all their power from molex directly connected to the riser circuit board. The only thing going to the motherboard is a USB cable from riser to 1x board for data. Motherboard power can really only power 2 or 3 cards anyway because the ATX plug only has 150W available. I have seen posts of people saying connecting molex to mobo is optional on that board anyway as long as you use powered risers. The USB risers will work for the individual PCIE connections. If you have three USB risers connect to the same molex cable, it will burn the cable.
|
|
|
|
adamvp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 09:44:09 AM |
|
which driver for ubuntu are the best for amd 470? :-)
|
I am looking for signature campaign ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) pm me
|
|
|
Dev_Sempak_coin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 10:04:07 AM |
|
any simple android aplication for monitoring claymore? now im using teamviewer but it's very unstable, need high internet conection
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 04:10:53 PM |
|
Isn't that the point of the powered risers? The cards get all their power from molex directly connected to the riser circuit board. The only thing going to the motherboard is a USB cable from riser to 1x board for data. Motherboard power can really only power 2 or 3 cards anyway because the ATX plug only has 150W available. I have seen posts of people saying connecting molex to mobo is optional on that board anyway as long as you use powered risers. The USB risers will work for the individual PCIE connections. If you have three USB risers connect to the same molex cable, it will burn the cable. Each cable from PSU is connected to a single card. All the cards are 8 pin, so power draw from the slot shouldn't be an issue.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
rawbert
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 04:11:33 PM |
|
I have a GIGABYTE GA-Z170X-UD5 board, trying to boot 5 470/480s. I have them all on powered 1x-16x risers. It won't POST with 5 cards, but it will boot with 4 cards, mining now, 100% stable. Tried changing slots. Tried changing PCIE gen to 1, 2, and 3 in bios. Default display set to onboard. Is there a different setting I need to change? Looked through the bios, didn't see anything else. Is this a board that needs 16x risers if using more than 4 cards? If so, can someone link one that won't fry a card? Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813128838Risers http://r.ebay.com/xeJZCX PSU EVGA SuperNOVA 1200 P2 Unfortunately the Z170 motherboards have some strange PCI Lane limitation that won't let you run more than 4 or 5 cards.
|
|
|
|
Ayers
Legendary
Offline
Activity: 2730
Merit: 1024
Vave.com - Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 04:13:54 PM |
|
it's true that lbry will be added for dual mining? this will kill nvidia miner lol, i hope claymore will choose another coin Hello Claymore, can you add Bikercoin to your GPU and CPU Mining software please? Bikercoin is a Cryptonote based coin, so you should add the support to your Cryptonote mining software. But it would be very nice if you can add Bikercoin support to ETH/DCR/SIA Miner too. I'm the owner of an Bikercoin pool. You can reach my Pool at: http://bikercoin.acidminer.orgYou can contact me here by answer my pm. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) kind regards i think not possible because cryptonote is mem intensive?
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 04:37:02 PM |
|
I have a GIGABYTE GA-Z170X-UD5 board, trying to boot 5 470/480s. I have them all on powered 1x-16x risers. It won't POST with 5 cards, but it will boot with 4 cards, mining now, 100% stable. Tried changing slots. Tried changing PCIE gen to 1, 2, and 3 in bios. Default display set to onboard. Is there a different setting I need to change? Looked through the bios, didn't see anything else. Is this a board that needs 16x risers if using more than 4 cards? If so, can someone link one that won't fry a card? Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813128838Risers http://r.ebay.com/xeJZCX PSU EVGA SuperNOVA 1200 P2 Unfortunately the Z170 motherboards have some strange PCI Lane limitation that won't let you run more than 4 or 5 cards. Hmm, I was thinking it would be fine since it has 7 slots, and you would think a board would be designed to use all slots, or at least more than 4. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Going go see if I can get 5 working by a card directly in board, as I don't have 16x risers to test. I didn't get a BTC pro because I heard their were high failure rates. This true? Or only on the H97?
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 05:16:20 PM Last edit: September 04, 2016, 05:55:46 PM by citronick |
|
I have a GIGABYTE GA-Z170X-UD5 board, trying to boot 5 470/480s. I have them all on powered 1x-16x risers. It won't POST with 5 cards, but it will boot with 4 cards, mining now, 100% stable. Tried changing slots. Tried changing PCIE gen to 1, 2, and 3 in bios. Default display set to onboard. Is there a different setting I need to change? Looked through the bios, didn't see anything else. Is this a board that needs 16x risers if using more than 4 cards? If so, can someone link one that won't fry a card? Motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813128838Risers http://r.ebay.com/xeJZCX PSU EVGA SuperNOVA 1200 P2 Unfortunately the Z170 motherboards have some strange PCI Lane limitation that won't let you run more than 4 or 5 cards. Hmm, I was thinking it would be fine since it has 7 slots, and you would think a board would be designed to use all slots, or at least more than 4. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Going go see if I can get 5 working by a card directly in board, as I don't have 16x risers to test. I didn't get a BTC pro because I heard their were high failure rates. This true? Or only on the H97? I think the ASrock H81 Pro BTC is quite decent mobo and have very good track record -- even from the days of Litecoin circa 2014. Go see Bits Be Trippin Youtube videos... they are rave on that board. A board that popular must be that good, no? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 05:31:19 PM |
|
it's true that lbry will be added for dual mining? this will kill nvidia miner lol, i hope claymore will choose another coin
whichever coin is added to dualmining, it's profitability is killed instantly, that's true
|
This is my signature...
|
|
|
adamvp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 06:44:08 PM |
|
it's true that lbry will be added for dual mining? this will kill nvidia miner lol, i hope claymore will choose another coin
whichever coin is added to dualmining, it's profitability is killed instantly, that's true Not instantly, in short term is even more profitable. At least sc was ..
|
I am looking for signature campaign ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) pm me
|
|
|
lin0sspice
Legendary
Offline
Activity: 1190
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 09:03:10 PM |
|
Rx 470, OpenCL.dll is missing cant run. I install lastest driver. from MSI. any help plz. From fresh install PC Do i need AMD SDK ?
|
|
|
|
◆ Website ◆ Whitepaper ◆ Discord | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | ◆ Latest News ◆ Twitter ◆ Telegram |
[/tab
|
|
|
ioglnx
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 09:18:27 PM |
|
Rx 470, OpenCL.dll is missing cant run. I install lastest driver. from MSI. any help plz. From fresh install PC Do i need AMD SDK ?
Install the offical driver from AMD/Radeon Group
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
lin0sspice
Legendary
Offline
Activity: 1190
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 09:51:11 PM |
|
Rx 470, OpenCL.dll is missing cant run. I install lastest driver. from MSI. any help plz. From fresh install PC Do i need AMD SDK ?
Install the offical driver from AMD/Radeon Group How long it will take to install ? My stuck at 33% Installing Display Driver. like 10 mins or more.
|
|
|
|
◆ Website ◆ Whitepaper ◆ Discord | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | | ░░░█░░░░░░░░░░░░░░░░░░░░░░█░░░ ░░██░░░░░░░░░░░░░░░░░░░░░░██░░ ░███░░░░░░░░░░░░░░░░░░░░░░███░ ████░░░░░░░░░░░░░░░░░░░░░░████ ███░░░░░░░░░░░░░░░░░░░░░░░░███ ███░░░░░░░░░░░▄▄░░░░░░░░░░░███ ███░░░░░░░░░░▄██▄░░░░░░░░░░███ ███░░░░░░░░▄██████▄░░░░░░░░███ ███▄░░░░░░▄████████▄░░░░░░▄███ ████░░░░░▄██████████▄░░░░░████ ████░░░░▄████████████▄░░░░████ ░██████░░▀██████████▀░░███████ ░███████░░░▀██████▀░░░████████ ░████████▄░░░▀██▀░░░▄████████░ ░█████████▄░░░░░░░░▄███████░░░ ░░█████████▄░░░░░░▄███████░░░░ ░░░░██████████▄▄████████░░░░░░ ░░░░░░████████████████░░░░░░░░ ░░░░░░░██████████████░░░░░░░░░ ░░░░░░░░░██████████░░░░░░░░░░░ | ◆ Latest News ◆ Twitter ◆ Telegram |
[/tab
|
|
|
|