luc1f3r00
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2016, 11:33:06 PM |
|
I could totally be wrong on this, but for some reason I have always assumed -ethi was a value between 1-10. Like I said though, I could totally be wrong.
Actually, -ethi accepts a range of values from 0 to 16, with default being 8. There are others who have the value set at 10, 12, etc, which is what I am trying to accomplish. So, still looking for the methodology to implement the "-ethi" command. On a side note, the default intensity for DCR seems to be 30. At that setting, I was getting about 310 per GPU and increasing it to 32 resulted in about 331 per GPU... so about 3% increase per notch. I don't expect the ETH impact to be that drastic per notch increased, but these GPU's should be getting at least 2-3 more Mh/s than their current 20.7 before any mods. So, hoping that increasing ETH intensity will do the trick. Thanks! [/quote] Thank you! You learn something new every day I guess. I might have to play around with some of my cooler cards now....Woohoo Back to your original question though. "If there are two or more options in the command line, miner will take all options from the command line, not from configuration file." So what happens if you specify -ethi 14 in your command to start claymore instead of the config file? [/quote][/i] Well, I have not tried adding it into the .bat file since I don't know enough about this to know whether that is a viable option or not. I guess I could try it but i really don't want to screw something up by just blindly attempting something. I would assume that there is probably a way to enter this command directly in the into the command window that Claymore is running in (especially since that is what the + & - signs due to DCR intensity), but it's just a matter of finding someone who has actually done it to learn exactly how. [/quote] I can tell you (although I run the linux version) that it is a safe parameter to add directly in the command prompt. Basically the Claymore documentation says that when you specify 2 or more parameters via the command prompt it doesn't even look for a config file for additional parameters, or at least thats how I interpreted it. Testing on my cards/machines, I can tell you there is about a 4 MH/s difference between -ethi 0 and -ethi 10. Although due to heat I usually just run it at the stock value of 8. Here is an example of what I run on one of my cards ---although as I said before, this is on ubuntu ./ethdcrminer64 -epool http://poolAddress -ewal walletAddress -epsw x -di 0 -ethi 10 -dpool siaPool -dwal siaWallet -dpsw x -dcoin sc -dbg 1 -gser 2 -r 1 -mport 0
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 12:05:17 AM |
|
i see claymore supports 32 GPUs.... is that altogether or per mining rig? I am deciding how i want to run my new rigs and if i can get away with putting 32 cards on one mobo im going to.. so any ideas on this one.
Per miner instance, so if you had a backplane with 300 pcie slots you could run 10 instances!!!!!!!!! If you ran old version, you could still run 32 cards on one rig, with 4 instances.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
fittsy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 12:50:07 AM |
|
Well, I have not tried adding it into the .bat file since I don't know enough about this to know whether that is a viable option or not. I guess I could try it but i really don't want to screw something up by just blindly attempting something.
I would assume that there is probably a way to enter this command directly in the into the command window that Claymore is running in (especially since that is what the + & - signs due to DCR intensity), but it's just a matter of finding someone who has actually done it to learn exactly how.
IMHO you should just ditch the command line. Just have your batch file do this: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.ex Then put all your commands into config.txt. At least that's how I prefer to run the miner. You can use the remote tool to actually update configs on the fly for multiple rigs ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Once you go config.txt you never go back ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
orionpaxx12
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 01:14:19 AM |
|
@Claymore do sell your Miner so that there is no Fee?
No. All my miners are public, I don't sell private miners. Claymore thanks for the awesome miner have been using it since i started mining ETH, I have 3 R9 390X's & 1 R7 370 & 1 GTX 1070, i replaced my 280x toxic with the 1070, i used to be able to dual mine everything with no problem but now after i clean installed windows 7, (which hasnt fully updated yet) when i dual mine my rig will start out with a stable hashrate and after a few minutes the hashrate jumps all over the place( High then Low) i am using 15.12 amd drivers and 372.54 nvidia drivers for windows 7 of course everything is setup up like it was before just a clean install of win7 and the added nvidia drivers for the 1070, and i have plenty of psu power 2600w so no problem there, no undervlots or overclocks when i mine just eth i am having no issuse just when i dual mine, and my virtual memerory is set to 20gb, could this be a problem with the fact windows update is taking forever to fully update, I am using 7.0 this also happens in version 7.2, any help would be great thanks in adavance
|
|
|
|
xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 04:07:17 AM |
|
@Claymore do sell your Miner so that there is no Fee?
No. All my miners are public, I don't sell private miners. Claymore thanks for the awesome miner have been using it since i started mining ETH, I have 3 R9 390X's & 1 R7 370 & 1 GTX 1070, i replaced my 280x toxic with the 1070, i used to be able to dual mine everything with no problem but now after i clean installed windows 7, (which hasnt fully updated yet) when i dual mine my rig will start out with a stable hashrate and after a few minutes the hashrate jumps all over the place( High then Low) i am using 15.12 amd drivers and 372.54 nvidia drivers for windows 7 of course everything is setup up like it was before just a clean install of win7 and the added nvidia drivers for the 1070, and i have plenty of psu power 2600w so no problem there, no undervlots or overclocks when i mine just eth i am having no issuse just when i dual mine, and my virtual memerory is set to 20gb, could this be a problem with the fact windows update is taking forever to fully update, I am using 7.0 this also happens in version 7.2, any help would be great thanks in adavance If something is murdering your cpu the hashrate varies a lot, or just goes to crap. Windows 7 takes ages to update with no service packs ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try killing any cpu hogs and see if it improves.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
orionpaxx12
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 04:15:43 AM |
|
@Claymore do sell your Miner so that there is no Fee?
No. All my miners are public, I don't sell private miners. Claymore thanks for the awesome miner have been using it since i started mining ETH, I have 3 R9 390X's & 1 R7 370 & 1 GTX 1070, i replaced my 280x toxic with the 1070, i used to be able to dual mine everything with no problem but now after i clean installed windows 7, (which hasnt fully updated yet) when i dual mine my rig will start out with a stable hashrate and after a few minutes the hashrate jumps all over the place( High then Low) i am using 15.12 amd drivers and 372.54 nvidia drivers for windows 7 of course everything is setup up like it was before just a clean install of win7 and the added nvidia drivers for the 1070, and i have plenty of psu power 2600w so no problem there, no undervlots or overclocks when i mine just eth i am having no issuse just when i dual mine, and my virtual memerory is set to 20gb, could this be a problem with the fact windows update is taking forever to fully update, I am using 7.0 this also happens in version 7.2, any help would be great thanks in adavance If something is murdering your cpu the hashrate varies a lot, or just goes to crap. Windows 7 takes ages to update with no service packs ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Try killing any cpu hogs and see if it improves. it was the updates and yes it took like 3 days, but finally updated and running smooth like before thanks for the response and the help
|
|
|
|
ShopemNL
Legendary
Offline
Activity: 1025
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 06:16:14 AM |
|
Something important
Is there any way to auto-restart miner if it hangs in the miner thread with the build in Watchdog?
|
|
|
|
chup
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
![](https://bitcointalk.org/Themes/custom1/images/post/lamp.gif) |
October 11, 2016, 06:26:00 AM |
|
Hi, all. Looking for information about following questions. 1. I am sometimes switch my mining rig(2x7950) to Diamond coin which uses groestl algo. Using 14.6 AMD Catalyst driver gives almost 80% more hashrate for groestl algo, but Claymore requires 15.12 at least. Claymore won't load at 14.6, just checked it. Is it possible somehow to switch between 14.6 and 15.12 AMD Catalyst drivers fast ? 2. I've heard Claymore supports mining Eth forks along with SIA coin. Is it more profitable than ETH + DCR ? What is exact amount of profit i can get with 2x7950 when adding SIA dual mode mining ? Thanks all ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1. If You use sgminer for Diamond mining, find amd_opencl32.dll, amd_opencl64.dll, amdocl.dll and amdocl64.dll from unpacked Catalyst 14.6 folders and copy them to the sgminer folder. 2. Use https://whattomine.com/merged_coins/2-eth-sc and take into account miner fees 2%, pool fees and increased power for dual mining to calculate profitability. Thx! For 1st answer. I've found and copied them. Now i can reinstall 15.12 and still get boost on mining Diamond coin via sgminer like under 14.6 drivers? Do i need to point sgminer onto this files and specify any options ? No need to instruct sgminer, it will use them if found in it's folder. Not a bad practice to make copies of .bin files You had good hashrate with.
|
|
|
|
totikk
Newbie
Offline
Activity: 73
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 06:47:32 AM |
|
Hellow Claymore. I have one problem. In the rig i have two HIS RX 470/ All works fine exept monitoring. Miner show only one(the first) gpu stats(temp. and fan).
Disable Crossfire its does not enabled. if GPU-Z show correct info. And in new (16.9) drivers i can't find this options. Where is it?
|
|
|
|
Dowper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 11:14:02 AM |
|
I have a problem:
WATCHDOG: GPU 2 hangs in OpenCL call, exit WATCHDOG: GPU 2 hangs in OpenCL call, exit Restarting OK, exit...
And after that I have to restart the PC, I cannot close the miner or start it again.
|
|
|
|
adamvp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 11:46:04 AM |
|
I have a problem:
WATCHDOG: GPU 2 hangs in OpenCL call, exit WATCHDOG: GPU 2 hangs in OpenCL call, exit Restarting OK, exit...
And after that I have to restart the PC, I cannot close the miner or start it again.
Please provide us more info like your system motherboard PSU etc. Please run miner with -dbg 1 option set and give us log
|
I am looking for signature campaign ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) pm me
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 12:09:57 PM |
|
I have a problem:
WATCHDOG: GPU 2 hangs in OpenCL call, exit WATCHDOG: GPU 2 hangs in OpenCL call, exit Restarting OK, exit...
And after that I have to restart the PC, I cannot close the miner or start it again.
Are you using the over-clocking options of the Claymore's miner? I had that problem when I used the miner to undervolt. However, soon I realized that I'm undervolting too much, so then I increased the voltage and it's working since then like charm. It occurred once I had set the power limit way low to -40% through miner's settings as well. I had to increase that limit after seeing that error.
|
|
|
|
jstefanop
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 05:42:58 PM |
|
Claymore...you should bundle the shared linux libraries your miner depends on (ex libcurl.so.4), that way we dont have to install all the ethereum crap just for a mining machine. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
PeaMine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 09:34:02 PM |
|
[quote author=PeaMine link=topic=14339
SAPPHIRE NITRO+ 470 OC--
The Sapphire 4XX series cards have a big following. BIOS mods are available for them, and the 470 8GB OC model looks like the best bang for the buck. The cards have metal, heat-conducting shells, not plastic. They are really well made.
There are reports of 29-31MH/s with a BIOS modded Sapphire Nitro RX 470 8GB cards when mining ETH. The Saphire RX 480 8GB OC cards will do slightly better, but cost more, and consume more power. --scryptr
@29mhs rx 480 consume more power than rx 470? I can have 480 very cheap.. only few % more than 470 but if rx 4 70 consume less power I'd prefer to buy rx 470.. And anyone here can help me with my friends Ati radeon hd 5xxx Cypress series (2gb RAM)? Thank you very much. I use it for gaming as well, so do you think this is the best? http://www.newegg.com/Product/Product.aspx?Item=N82E16814202224There is also one with a higher core clock rate, what do you think? http://www.newegg.com/Product/Product.aspx?item=N82E16814202223
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
fittsy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 10:55:19 PM |
|
For Ethereum mining it's more about the memory speed not the processor. Both of those 8 GB cards you linked have Effective Memory Clock: 8000 MHz. If you look at the specifications for the 4 GB version it only has 7000 MHz memory. For gaming (which you said you do) you would want the higher core clock rate. So the second one would overall be better. (IMHO) Buy me one and send me one for gaming and I'll let you know ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
osnwt
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2016, 11:15:11 PM |
|
@Claymore, few questions:
1) -cclock: you wrote "you can overclock only", but it seems not to be true for, at least, Windows and Polaris. My 470x can be underclocked (GPU set to 1150 for all states). 2) Any chance to support -cclock and -mclock on Linux for amdgpu-pro drivers (for Polaris)? It is not said "unsupported on Linux", but does not work for me (mem can't be set to 1950 using this). 3) Any chance to support -cvddc and -mvddc on Linux for amdgpu-pro drivers? 4) Are older cards like 7950/7970 supported using amdgpu-pro drivers on Linux? 5) There is an issue on Windows when used -*clock commands: they are applied at some init stage, but for my 470x it instantly changes hashrates only for the card with monitor connected. I can stop and resume other cards for changes to take effect (and show correct/new hashrate), but probably makes sense to fix it somehow, so miner shows correct hashrates after applying values. Of course, if you run it for 2+ time, drivers keep settings and there is no that effect. Still, it is surprising when you run minr with some value and it is not reflected in hashrates.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2016, 02:04:02 AM |
|
I have a problem:
WATCHDOG: GPU 2 hangs in OpenCL call, exit WATCHDOG: GPU 2 hangs in OpenCL call, exit Restarting OK, exit...
And after that I have to restart the PC, I cannot close the miner or start it again.
Have you tried the watchdog restart option -r 1? When watchdog detects a problem with the -r 1 switch it will run the reboot.bat file. Of course you have to create the reboot.bat file. If you want it to reboot your pc for you you can just use the command: shutdown /r /f /t 1 inside the reboot.bat batch file or whatever else you want to put in there when it hangs.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2016, 02:59:57 AM |
|
Claymore...you should bundle the shared linux libraries your miner depends on (ex libcurl.so.4), that way we dont have to install all the ethereum crap just for a mining machine. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Perhaps a single script to do all the necessary installations of libraries needed for CDM to run. Or a special edition image for Ubuntu for Claymore Dual Miner would be excellent. I have tried Ubuntu 16.04, 14.04 and installation of the AMD drivers is pain in the behind. Resorting to Ubuntu 12.04 now ....
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
djraven911
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2016, 08:09:58 AM |
|
What do i do if i have mixed cards r9 380 & RX480? The recommended Catalyst 15.12. doesnt support the new RX400 series! Therefore if i use the latest version 16 catalyst, once in 24h i the miner stops and i get: GPU1 (which is rx480) hangs in openCL, and sometimes above that i get also in windows notification that my display driver recovered, and after 5 seconds a blue screen collecting info...
The question is how will the users who have videocards - rx4 series - use the catalyst 15.12, or this miner without errors?
Thanks
|
|
|
|
CoRpO
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2016, 08:12:55 AM |
|
What do i do if i have mixed cards r9 380 & RX480? The recommended Catalyst 15.12. doesnt support the new RX400 series! Therefore if i use the latest version 16 catalyst, once in 24h i the miner stops and i get: GPU1 (which is rx480) hangs in openCL, and sometimes above that i get also in windows notification that my display driver recovered, and after 5 seconds a blue screen collecting info...
The question is how will the users who have videocards - rx4 series - use the catalyst 15.12, or this miner without errors?
Thanks
It's not drivers related. Seems like your rx480 is crashing. Either overclocked too far, or you PSU can't handle the load.
|
|
|
|
|