Ursul0
|
|
September 06, 2017, 01:03:33 PM |
|
On another note, the new blockchain driver raise the power usage of your cards alot. If your mod was tight you may have to change some things like power limit or max temp.
Why would you say that? Comparing to the 16.11.4 I was running before both unofficial beta and official blockchain beta drivers make rx4xx use LESS power in a range of 2-5%, measured at the wall. Whats working for you for stable undervolts? AB beta16 or Overdriventool? No external utils needed. I hardcode voltages in bios and do fine-tune with claymore's miners. (New API is good on both ZEC & ETH miners)
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 06, 2017, 01:54:47 PM |
|
Any idea what could be wrong? Claymore 10.0 and latest Windows Blockchain drivers: 15:48:35:952 504 args: -epool xxxxxxxxx -ewal xxxxxxxxxxxxx -eworker rig1 -epsw x -esm 0 -allcoins 1 -mode 1 -fanmin 40 -fanmax 80 -cclock 1250 -mclock 2200 -cvddc 900 -mvddc 900 15:48:35:965 504 15:48:35:981 504 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 15:48:35:987 504 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.0 º 15:48:35:997 504 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 15:48:36:004 504 15:48:36:211 504 ETH: 1 pool is specified 15:48:36:222 504 Main Ethereum pool is 79.98.144.27:8008 15:48:36:977 504 OpenCL platform: Intel(R) OpenCL 15:48:36:982 504 OpenCL platform: Intel(R) OpenCL 15:48:36:993 504 OpenCL platform: AMD Accelerated Parallel Processing 15:48:37:003 504 OpenCL initializing...
15:48:37:009 504 AMD Cards available: 7 15:48:37:016 504 GPU #0: Ellesmere, 8192 MB available, 36 compute units 15:48:37:021 504 GPU #0 recognized as Radeon RX 480/580 15:48:37:026 504 GPU #1: Ellesmere, 8192 MB available, 36 compute units 15:48:37:031 504 GPU #1 recognized as Radeon RX 480/580 15:48:37:035 504 GPU #2: Ellesmere, 8192 MB available, 36 compute units 15:48:37:039 504 GPU #2 recognized as Radeon RX 480/580 15:48:37:044 504 GPU #3: Ellesmere, 8192 MB available, 36 compute units 15:48:37:047 504 GPU #3 recognized as Radeon RX 480/580 15:48:37:050 504 GPU #4: Ellesmere, 8192 MB available, 36 compute units 15:48:37:053 504 GPU #4 recognized as Radeon RX 480/580 15:48:37:057 504 GPU #5: Ellesmere, 8192 MB available, 36 compute units 15:48:37:061 504 GPU #5 recognized as Radeon RX 480/580 15:48:37:064 504 GPU #6: Ellesmere, 8192 MB available, 36 compute units 15:48:37:067 504 GPU #6 recognized as Radeon RX 480/580 15:48:37:070 504 POOL/SOLO version 15:48:37:076 504 b415 15:48:37:080 504 Platform: Windows 15:48:37:107 504 start building OpenCL program for GPU 0... 15:48:37:393 504 done 15:48:37:603 504 start building OpenCL program for GPU 1...
and and this moment EthDcrMiner64.exe crashed.
|
|
|
|
KL0nLutiy
Member
Offline
Activity: 158
Merit: 10
|
|
September 06, 2017, 02:04:49 PM |
|
@Claymore Is there any room to improve the hashrate for Vega on ETH?
|
|
|
|
kkourmousis
Member
Offline
Activity: 119
Merit: 10
|
|
September 06, 2017, 02:06:59 PM |
|
Any idea what could be wrong? Claymore 10.0 and latest Windows Blockchain drivers: 15:48:35:952 504 args: -epool xxxxxxxxx -ewal xxxxxxxxxxxxx -eworker rig1 -epsw x -esm 0 -allcoins 1 -mode 1 -fanmin 40 -fanmax 80 -cclock 1250 -mclock 2200 -cvddc 900 -mvddc 900 15:48:35:965 504 15:48:35:981 504 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 15:48:35:987 504 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.0 º 15:48:35:997 504 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 15:48:36:004 504 15:48:36:211 504 ETH: 1 pool is specified 15:48:36:222 504 Main Ethereum pool is 79.98.144.27:8008 15:48:36:977 504 OpenCL platform: Intel(R) OpenCL 15:48:36:982 504 OpenCL platform: Intel(R) OpenCL 15:48:36:993 504 OpenCL platform: AMD Accelerated Parallel Processing 15:48:37:003 504 OpenCL initializing...
15:48:37:009 504 AMD Cards available: 7 15:48:37:016 504 GPU #0: Ellesmere, 8192 MB available, 36 compute units 15:48:37:021 504 GPU #0 recognized as Radeon RX 480/580 15:48:37:026 504 GPU #1: Ellesmere, 8192 MB available, 36 compute units 15:48:37:031 504 GPU #1 recognized as Radeon RX 480/580 15:48:37:035 504 GPU #2: Ellesmere, 8192 MB available, 36 compute units 15:48:37:039 504 GPU #2 recognized as Radeon RX 480/580 15:48:37:044 504 GPU #3: Ellesmere, 8192 MB available, 36 compute units 15:48:37:047 504 GPU #3 recognized as Radeon RX 480/580 15:48:37:050 504 GPU #4: Ellesmere, 8192 MB available, 36 compute units 15:48:37:053 504 GPU #4 recognized as Radeon RX 480/580 15:48:37:057 504 GPU #5: Ellesmere, 8192 MB available, 36 compute units 15:48:37:061 504 GPU #5 recognized as Radeon RX 480/580 15:48:37:064 504 GPU #6: Ellesmere, 8192 MB available, 36 compute units 15:48:37:067 504 GPU #6 recognized as Radeon RX 480/580 15:48:37:070 504 POOL/SOLO version 15:48:37:076 504 b415 15:48:37:080 504 Platform: Windows 15:48:37:107 504 start building OpenCL program for GPU 0... 15:48:37:393 504 done 15:48:37:603 504 start building OpenCL program for GPU 1...
and and this moment EthDcrMiner64.exe crashed. Try stock clocks voltages. If you are okay with them, then it is your OC (1250 is pretty high). My personal sweet spot is -cclock 1140 -mclock 2150 -cvddc 850 -mvddc 875. For those voltages, I have to lower mclock for some cards. I prefer those voltages because I have high price of kWh in my country (~0.3$)
|
Buy me a souvlaki: ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx
|
|
|
doyler29
Newbie
Offline
Activity: 311
Merit: 0
|
|
September 06, 2017, 03:03:21 PM Last edit: September 06, 2017, 03:26:33 PM by doyler29 |
|
No Fkin Luck......
Anyone else had problems. downloaded and run V10, ran for about 15mins then shut down. Had a fine working R9390x Trix-x. Its now completely not working, not being read at all the fans aren't running now. The only thing to tell me its getting power is the yellow button working. Have done all standard checks, changed cables, un & re-installed software, riser but no luck. Not knowledge able enough to get any further. Think thats a £300 card fucked. Anybody give me advice of what steps to check the card before i smash it of the wall. lol Dont have the funds to replace it so any help would be greatly appreciated....
When single card is used computer starts up but no display, using teamviewer to access. also card is not read in device manager. Does that mean the displays away so cards just a paper-wait now or cant anytime be done..........
|
|
|
|
NavyCuda
Member
Offline
Activity: 107
Merit: 10
|
|
September 06, 2017, 03:20:36 PM |
|
2x Vega FE, 40-42Mh/s each. 3770k, water cooled, two HDDs, two SSDs, 3 fans.
Idle, 90w, full load mining, 511w.
|
|
|
|
Ursul0
|
|
September 06, 2017, 03:34:40 PM |
|
No Fkin Luck......
Anyone else had problems. downloaded and run V10, ran for about 15mins then shut down. Had a fine working R9390x Trix-x. Its now completely not working, not being read at all the fans aren't running now. The only thing to tell me its getting power is the yellow button working. Have done all standard checks, changed cables, un & re-installed software, riser but no luck. Not knowledge able enough to get any further. Think thats a £300 card fucked. Anybody give me advice of what steps to check the card before i smash it of the wall. lol Dont have the funds to replace it so any help would be greatly appreciated....
When single card is used computer starts up but no display, using teamviewer to access. also card is not read in device manager. Does that mean the displays away so cards just a paper-wait now or cant anytime be done..........
Just a suggestion to make your life easier: 1) do not install amd driver EXE ever (point and click from device manager) 2) do not ever install/use AB or Strix(edit: or whatever Sapphire call their crap) 3) do not try to "fix" several problems at the same time RE dead card: try to power down, disconnect the ac plug and turn it on; try to stick it into x16 slot and see if it will work (you may need to play with your BIOS, also if you connect display make sure it's not integrated set as your default)
|
|
|
|
Ursul0
|
|
September 06, 2017, 05:08:07 PM |
|
@Claymore Is there any room to improve the hashrate for Vega on ETH?
yeah. very interesting question.
|
|
|
|
Zosinburg
Newbie
Offline
Activity: 64
Merit: 0
|
|
September 06, 2017, 05:12:32 PM |
|
@Claymore Is there any room to improve the hashrate for Vega on ETH?
yeah. very interesting question. I think you need to mod the memory timing to get higher hash.
|
|
|
|
Yohow
Member
Offline
Activity: 66
Merit: 10
|
|
September 06, 2017, 06:41:16 PM |
|
I have issues when Devfee stops mining and disconnect. Claymore trays to reconnect to my main pool after devfee mining and always shows rejected connection... any help? Many thanks!
|
|
|
|
yoshcat
Newbie
Offline
Activity: 33
Merit: 0
|
|
September 06, 2017, 07:07:05 PM |
|
Hello, Claymore. Could you add support for the devfee to nicehash - so that you can use -allpools 0 (like in the zec miner)? The kind of permanent reconnects between pools often fail . As a result, you have to use the -nofee 1 option for stability, but we both lose some profit. I think I'm not alone with this problem. I do not know what exactly the problem is, it began to show itself often, recently, but with "nofee" the problem disappears, since there are no reconnections between the main and the devfee pools. I have issues when Devfee stops mining and disconnect. Claymore trays to reconnect to my main pool after devfee mining and always shows rejected connection... any help? Many thanks!
Oh yeah! A similar problem.
|
|
|
|
Ursul0
|
|
September 06, 2017, 07:54:42 PM |
|
@Claymore Is there any room to improve the hashrate for Vega on ETH?
yeah. very interesting question. I think you need to mod the memory timing to get higher hash. you think right, but it has nothing to do with the question: what are Claymore's plans in regard to optimizing this miner for Vega architecture?
|
|
|
|
Francky
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 06, 2017, 08:05:49 PM |
|
First timer for dual mining, got ETH working flawlessly but cannot get SIA working or more precisely reporting and get this "TARGET-MISS" error after each share:
Tried different setting, defaulted my OC... but without luck Google isn't helping either... any idea?
ETH - Total Speed: 33.599 Mh/s, Total Shares: 20, Rejected: 0, Time: 00:45 ETH: GPU0 33.599 Mh/s SC - Total Speed: 537.577 Mh/s, Total Shares: 6, Rejected: 0 SC: GPU0 537.577 Mh/s SC: 09/06/17-14:29:40 - SHARE FOUND - (GPU 0) SC: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"target-miss"}}
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool noobpool.com:8008 -ewal XXX -epsw x -eworker 1 -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal XXX -dcoin sia -dcri 16
|
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
September 06, 2017, 08:07:52 PM |
|
Does anyone know why the system doesn't boot if I plus pcie riser into main x16 slot on motherboard? BTW - I'm using P5Q PRO board: https://www.asus.com/Motherboards/P5Q_PRO/Whenever I use the main x16 pcie slot (blue) the system won't boot. Anyone knows how can I fix this ?
|
|
|
|
Evan
|
|
September 06, 2017, 09:10:10 PM |
|
Does anyone know why the system doesn't boot if I plus pcie riser into main x16 slot on motherboard? BTW - I'm using P5Q PRO board: https://www.asus.com/Motherboards/P5Q_PRO/Whenever I use the main x16 pcie slot (blue) the system won't boot. Anyone knows how can I fix this ? Time to talk to your MFG.
|
I am poor, but i do work for Coin 1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
|
|
|
spamserv
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 06, 2017, 09:21:58 PM |
|
Hey, I am not sure if this is the right place to ask: Rig continually worked until yesterday morning, and then in logs I saw devfee couldn't mine, and tried several times during night on eu1.ethermine.org pool without success. I am trying to connect since then and I get the error: ETH: Stratum - Cannot connect to eu1.ethermine.org:4444 ETH: Stratum - Failed to connect, retry in 20 sec... I tried: - older and latest version of Claymore
- restart miner/PC
- restart router
- options like -esm 0-3
- different miners
- different pools
- turn off windows firewall
- turn of windows defender
- updated drivers
- googling similar problems with no success
I'm using the basic configuration: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -epsw x I haven't done anything network-wise since then, so I doubt port could be the problem, and there were no Windows updates in the meantime. Do you guys maybe have an idea of what might be the problem and what could I do more? In a terminal window try: ipconfig /flushdns I just tried it, get the same error. not a solution but maybe a workaround: -allpools 1 Nothing yet, still the same problem, but thank you for trying. Does anyone else have an idea maybe?
|
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
September 06, 2017, 09:50:09 PM |
|
Does anyone know why the system doesn't boot if I plug pcie riser into main x16 slot on motherboard? BTW - I'm using P5Q PRO board: https://www.asus.com/Motherboards/P5Q_PRO/Whenever I use the main x16 pcie slot (blue) the system won't boot. Anyone knows how can I fix this ? Time to talk to your MFG. mfg?
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
September 06, 2017, 10:18:07 PM |
|
Nvidia cards truly suck for dual mining.
!060's 23.6 eth(alt eth coin) 17.6 Lbr vs 570 29.3 eth(alt eth coin) 65. Lbr
Hell my R9 280X 23.7(no mods) Eth(alt eth coin)53.2 Lbr - tried just to test but do not mine with this card too power hungry
|
|
|
|
P00P135
|
|
September 06, 2017, 10:25:39 PM |
|
Nvidia cards truly suck for dual mining.
!060's 23.6 eth(alt eth coin) 17.6 Lbr vs 570 29.3 eth(alt eth coin) 65. Lbr
Hell my R9 280X 23.7(no mods) Eth(alt eth coin)53.2 Lbr - tried just to test but do not mine with this card too power hungry
You are comparing an apple to an orange. 570/580 is more in line with a 1070 not a 1060.
|
|
|
|
johndoe2
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2017, 10:26:42 PM |
|
I stopped dual mining on my mining rig, 3 Raisers connected to 1 sata cable seems to be a hazard.
|
|
|
|
|