Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 07:26:09 AM Last edit: October 10, 2017, 06:49:32 PM by Ursul0 |
|
Does anyone have a solution for this annoying Nvidia issue( see below) It happens to me unpredictably on win10 rigs with 8 amds and at least 2 nvidia 1060. Nothing to do with overclock, as it does the same on stock. Sometimes several restarts required, before it goes away. Any ideas? EDIT: @Claymore if I change -cclock values for polaris for the first time (even after restart) it will almost definitely occur 21:22:17:519 bc4 Setting DAG epoch #145 for GPU6 21:22:17:582 bc4 Create GPU buffer for GPU6 21:22:17:566 13f4 Create GPU buffer for GPU5 21:22:17:566 117c Create GPU buffer for GPU11 21:22:17:582 1384 Setting DAG epoch #145 for GPU0 21:22:17:597 1384 Create GPU buffer for GPU0 21:22:18:800 418 recv: 51 21:22:18:800 418 srv pck: 50 21:22:19:597 117c CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
21:22:20:299 7ec GPU 9, GpuMiner cu_kd failed 30 (4), unknown error 21:22:20:299 7ec GPU 9, Calc DAG failed! 21:22:20:424 7ac GPU 10, GpuMiner cu_kd failed 30 (4), unknown error 21:22:20:440 f48 NVML: cannot get current temperature, error 999 (an internal driver error occurred) 21:22:20:440 f48 NVML: cannot get fan speed, error 999 (an internal driver error occurred) 21:22:20:471 f48 NVML: cannot get current temperature, error 999 (an internal driver error occurred) 21:22:20:471 f48 NVML: cannot get fan speed, error 999 (an internal driver error occurred) 21:22:20:471 f48 NVML: cannot get current temperature, error 999 (an internal driver error occurred) 21:22:20:487 f48 NVML: cannot get fan speed, error 999 (an internal driver error occurred) 21:22:20:487 f48 NVML: cannot get current temperature, error 999 (an internal driver error occurred) 21:22:20:893 f48 NVML: cannot get fan speed, error 999 (an internal driver error occurred) 21:22:21:096 1190 GPU 8, GpuMiner cu_kd failed 30 (4), unknown error 21:22:21:096 7ac GPU 10, Calc DAG failed! 21:22:21:096 1190 GPU 8, Calc DAG failed!
|
|
|
|
Victorio
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 09:40:32 AM |
|
I changed other pool but seems not working. it still show 0.00M.hs. here's my log, many thanks 09:42:46:958 4f4 Setting DAG epoch #3... 09:42:48:314 4f4 Setting DAG epoch #3 for GPU0 09:42:48:321 4f4 Create GPU buffer for GPU0 The miner tries to place the DAG file into graphics memory, but never returns a successful result. You should get such message: "Setting DAG epoch #3 for GPU0 done GPU0 DAG creation time - xxxx ms" Both your logs miss this part and it means DAG cannot be created. You said your card is AMD Polaris RX. What is your OS and driver version?
|
|
|
|
NewbieMiner17
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 11:03:05 AM |
|
Does anyone know is today the day of Byzantium release on ethereum network? I read it should be released on October 9th. It should reduce blocktime from 30s to 14s (but also reduce reward from 5eth to 3eth per block). It would be increase 24% from current state...
23% to be exact. It will be deployed when block reaches 4,370,000. I see news about reducing the block time from 30s to 20s, will see. 14s it is better. But if 14s be true, 3gb 1060 may lose relevance before PoS. For how long you think rx 470 4gb will be able to mine eth? Not sure how the block time change will affect it but I believe the issue with size is actually down to the DAG size. From that the approximation is below The 3GB limit will be hit around mid-April 2018 The 4GB limit will be hit around mid-September 2019
|
|
|
|
osirisgekkou
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 11:12:47 AM |
|
I changed other pool but seems not working. it still show 0.00M.hs. here's my log, many thanks 09:42:46:958 4f4 Setting DAG epoch #3... 09:42:48:314 4f4 Setting DAG epoch #3 for GPU0 09:42:48:321 4f4 Create GPU buffer for GPU0 The miner tries to place the DAG file into graphics memory, but never returns a successful result. You should get such message: "Setting DAG epoch #3 for GPU0 done GPU0 DAG creation time - xxxx ms" Both your logs miss this part and it means DAG cannot be created. You said your card is AMD Polaris RX. What is your OS and driver version? My OS is win10 64bit and for AMD driver I use 17.1.1 I have both tried use default GPU clock and OC clock but not working And also tried update to latest too but also not working so back to 17.1.1 thanks
|
|
|
|
deadsix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 11:23:56 AM |
|
I changed other pool but seems not working. it still show 0.00M.hs. here's my log, many thanks 09:42:46:958 4f4 Setting DAG epoch #3... 09:42:48:314 4f4 Setting DAG epoch #3 for GPU0 09:42:48:321 4f4 Create GPU buffer for GPU0 The miner tries to place the DAG file into graphics memory, but never returns a successful result. You should get such message: "Setting DAG epoch #3 for GPU0 done GPU0 DAG creation time - xxxx ms" Both your logs miss this part and it means DAG cannot be created. You said your card is AMD Polaris RX. What is your OS and driver version? My OS is win10 64bit and for AMD driver I use 17.1.1 I have both tried use default GPU clock and OC clock but not working And also tried update to latest too but also not working so back to 17.1.1 thanks Do you have pagefile set to atleast 16gb?
|
|
|
|
Branko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 04:24:13 PM |
|
Do we need miner update for Byzantium?
|
|
|
|
greatauror28
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 181
Merit: 101
Ethereum Miner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 04:48:36 PM |
|
Does anyone know is today the day of Byzantium release on ethereum network? I read it should be released on October 9th. It should reduce blocktime from 30s to 14s (but also reduce reward from 5eth to 3eth per block). It would be increase 24% from current state...
23% to be exact. It will be deployed when block reaches 4,370,000. I see news about reducing the block time from 30s to 20s, will see. 14s it is better. But if 14s be true, 3gb 1060 may lose relevance before PoS. For how long you think rx 470 4gb will be able to mine eth? Not sure how the block time change will affect it but I believe the issue with size is actually down to the DAG size. From that the approximation is below The 3GB limit will be hit around mid-April 2018 The 4GB limit will be hit around mid-September 2019 Correction - 3gb cards will be useless by November 2018, not April as per this reddit post. 4GB cards, probably Nov 2019 or later. Do we need miner update for Byzantium?
Not that I know of - if you're mining with a pool. Solo miners must update their software.
|
I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.
|
|
|
Kryptminer
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 05:01:32 PM |
|
Hello everybody, i am reading this topic for several weeks now and gathered a lot of experience here. But actually i am not going further with my vega 56 cards. I found some other users with the same problem but no solution to that problem yet. Maybe you can help. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I try to dualmine ETH and SC but everytime my cards find a share i get an received error on SC saying: GPU0 t=74C fan=47% SC: 10/10/17-18:56:59 - SHARE FOUND - (GPU 0) SC: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"target-miss"}}ETH: 10/10/17-18:57:06 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 31.952 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:04 ETH: GPU0 31.952 Mh/s SC - Total Speed: 958.574 Mh/s, Total Shares: 2, Rejected: 0 SC: GPU0 958.574 Mh/sHas anyone solved this problem or am i doing something wrong? I got my configs from nanopool and i put the txt files and the bat file in the claymore folder.
|
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 06:11:10 PM |
|
Earlier this week, I played with them again to squeeze in few more Mh. These are my settings: -cclock 1140 -mclock 2075 -cvddc 875 -mvddc 875
They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.
Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25
|
|
|
|
whatomine
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 07:08:45 PM |
|
Hi guys,
I have some new rig 470/480/570/580 (about 10). Some of them are working great and stable, others not.
GPU0 t=77C fan=80%, GPU1 t=76C fan=79%, GPU2 t=81C fan=79%, GPU3 t=69C fan=78%, GPU4 t=69C fan=79%, GPU5 t=78C fan=78% ETH: 10/10/17-11:10:50 - New job from exp.epool.xyz:3333 ETH - Total Speed: 148.773 Mh/s, Total Shares: 3942, Rejected: 0, Time: 14:26 ETH: GPU0 23.809 Mh/s, GPU1 29.829 Mh/s, GPU2 30.169 Mh/s, GPU3 12.744 Mh/s, GPU4 22.027 Mh/s, GPU5 30.196 Mh/s
As you can see, this is a rig with 6 Rx580 (exactly the same: manufactor, memory type..) with modded bios. GPU 1,2,5 work fine, but GPU 0,3,4 is not, they never reach other's speed (100% gpu usage, the same core/memory clock in GPU-Z) except the begining of mining (when I start the miner, the fist hashrate of them usually great, then drop rapidly after 2 or 3 times showing speed )and I really have no idea about this problems.
This problem also happen with the 470/480/570/580 rig, sometime only 1 low-speed GPU, sometime 3-4 GPUs, with any GPU driver I can get (the original CD driver or the fix dag beta or the newest driver on website), with claymore miner 9.7, 9.7 or 10. These rigs have differrent mainboard, CPU too. Note that all GPU I have tested on my main desktop and got all great hashrate.
After a little bit searching, I found that somebody have similar problem on win10 with very low hashrate (~2-3Mh/s) and solved when install win7, but I dont think it's the root cause so I raise them here to get some discussion (and I dont want to run it on win7 too).
I using win10 64bit, 4GB RAM, ~20GB virtual memory.
Thanks for your help.
I had the same problem when I used one sata cable to power 3 cards, especially during dual-mining. Each sata cable should only power 2 cards even though they have 3 outputs. Also, set your PCIe speed to gen2 or even gen1 helps. I have two rigs each with 6 RX580 cards and they all get ~ 176 Mh/s Ether and 500 Mh/s LBC. Both run on windows 10 with the latest blockchain driver (Aug 23rd).
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 11:07:16 PM |
|
Earlier this week, I played with them again to squeeze in few more Mh. These are my settings: -cclock 1140 -mclock 2075 -cvddc 875 -mvddc 875
They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.
Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25 -96 1150 2200 DCR 30 580 8 Gb x 4 Pulling 960 watts from the wall moded bios crinsom beta AB beta 120 to 122 Mhs dual mining, about 30.3 per gpu
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 10, 2017, 11:16:33 PM |
|
Stupid question here Lets say I got a Reported hashrate of 7 GB why is it that the average hashrate never gets closer to it than maybe 6.2 GB? What's keeping it to get closer to the other one, what can I do to improve that?
Any ideas?
|
|
|
|
Yohow
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 66
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 12:59:19 AM |
|
Earlier this week, I played with them again to squeeze in few more Mh. These are my settings: -cclock 1140 -mclock 2075 -cvddc 875 -mvddc 875
They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.
Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25 480 or 580? 4GB or 8GB? I have a 6x RX 480 (8GB) rig and they hashes ~29.1 up to 29.6, ~176MH/s.
|
|
|
|
fmo007
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
October 11, 2017, 07:26:45 AM |
|
Hi:
I have a mining rig as follows:
6 NVIDIA GTX 1060 GPUs 6GB each Windows 10, 1703 Intel Pentium CPU G4400 @ 3300 Ghz, 4GB of RAM Claymore's miner v10.0 in Ethereum solo mining with DevFee always on
I have a reported hasrate of 121MH/s, an average share rate of about 120 shares per hour, and want to increase the effective hasrate of the mining rig (by increasing the share rate I guess)
1) How can I raise the share rate? 2) I can't switch the NVIDIA cards to P0 power state. Now they are working at P2 state. Also, I think they should be in "COMPUTE ONLY MODE", but neither can I do this. I think that doing this will increase share rate. Does Claymore can do this and / or help me with such power state change and / or "COMPUTE ONLY MODE" change? 3) Increasing main RAM can increase the share rate at all? If so, how much RAM do I have to put on my system in order to have a higher share rate? What if I put 64GB of RAM on my mining rig? Does this change in RAM will "drive" to a 10 times raise in shares per hour in my mining rig?
Best regards, you have the best mining software!!!
|
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 08:15:12 AM |
|
480 or 580? 4GB or 8GB? I have a 6x RX 480 (8GB) rig and they hashes ~29.1 up to 29.6, ~176MH/s.
we are talking about Asus rx 580 dual 8gb OC with samsung memory.
|
|
|
|
jimmykl
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 09:20:10 AM |
|
Hi:
I have a mining rig as follows:
6 NVIDIA GTX 1060 GPUs 6GB each Windows 10, 1703 Intel Pentium CPU G4400 @ 3300 Ghz, 4GB of RAM Claymore's miner v10.0 in Ethereum solo mining with DevFee always on
I have a reported hasrate of 121MH/s, an average share rate of about 120 shares per hour, and want to increase the effective hasrate of the mining rig (by increasing the share rate I guess)
1) How can I raise the share rate? 2) I can't switch the NVIDIA cards to P0 power state. Now they are working at P2 state. Also, I think they should be in "COMPUTE ONLY MODE", but neither can I do this. I think that doing this will increase share rate. Does Claymore can do this and / or help me with such power state change and / or "COMPUTE ONLY MODE" change? 3) Increasing main RAM can increase the share rate at all? If so, how much RAM do I have to put on my system in order to have a higher share rate? What if I put 64GB of RAM on my mining rig? Does this change in RAM will "drive" to a 10 times raise in shares per hour in my mining rig?
Best regards, you have the best mining software!!!
1) Overclocking. 2) You can't set p state or set compute only mode with 1000 series cards. You can try: https://nvidia.custhelp.com/app/answers/detail/a_id/3130/~/setting-power-management-mode-from-adaptive-to-maximum-performance and https://nvidia.custhelp.com/app/answers/detail/a_id/2700/~/disabling-nvidia-physx-gpu-acceleration3) No.
|
|
|
|
osirisgekkou
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 09:28:03 AM |
|
I changed other pool but seems not working. it still show 0.00M.hs. here's my log, many thanks 09:42:46:958 4f4 Setting DAG epoch #3... 09:42:48:314 4f4 Setting DAG epoch #3 for GPU0 09:42:48:321 4f4 Create GPU buffer for GPU0 The miner tries to place the DAG file into graphics memory, but never returns a successful result. You should get such message: "Setting DAG epoch #3 for GPU0 done GPU0 DAG creation time - xxxx ms" Both your logs miss this part and it means DAG cannot be created. You said your card is AMD Polaris RX. What is your OS and driver version? My OS is win10 64bit and for AMD driver I use 17.1.1 I have both tried use default GPU clock and OC clock but not working And also tried update to latest too but also not working so back to 17.1.1 thanks Do you have pagefile set to atleast 16gb? thanks, problem solved, I set the pagefile to 16GB not work, but after I set to 32GB it suddenly worked
|
|
|
|
asdpof
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 11:07:49 AM |
|
1 of my cards is working like 10/15 min at full and then crashing 0/mhs... How to fix it? The rest are ok.
It could be that this card gets to higher temperature than the others. No much information here, the normal guess would be: reducing its overclock a bit, or if you are using dual mining tune the 2nd coin to lower intensitity , or setting the -ttli setting on the miner.
|
|
|
|
greatauror28
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 181
Merit: 101
Ethereum Miner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 12:39:32 PM |
|
Earlier this week, I played with them again to squeeze in few more Mh. These are my settings: -cclock 1140 -mclock 2075 -cvddc 875 -mvddc 875
They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.
Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25 I'm using custom straps ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.
|
|
|
iRrromka
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 12:43:10 PM |
|
Earlier this week, I played with them again to squeeze in few more Mh. These are my settings: -cclock 1140 -mclock 2075 -cvddc 875 -mvddc 875
They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.
Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25 I'm using custom straps ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Please share this one ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . 0.1 ETH from me in case if I'll get 176 on this settings!
|
|
|
|
|