entity279
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 10, 2017, 06:32:35 PM |
|
Hi
I'm trying to mine eth+pasl
The problem is that I lower the mining of eth to 17 mh/s when it is normal that this about 30 or 31 mhs mine eth+lbc
I put my configuration to see if you can lend me a hand:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal miwallet.miworker -epsw x -dpool mine.pasl.fairpool.xyz:4009 -dwal <YOUR_PASL_ACCOUNT>+<WORKER_NAME> -dpsw x -tstop 85 -dcoin pasc
What will I be doing wrong?
regards
you need to manually tune (decrease) your -dcri parameter to restore ETH value. I'd start with '-dcri 1' and keep increasing until the eth hashrate drops too much. Also, you can increase power limit which could help both ETH and PASC climb back up
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
December 11, 2017, 12:28:01 AM |
|
Hi
I'm trying to mine eth+pasl
The problem is that I lower the mining of eth to 17 mh/s when it is normal that this about 30 or 31 mhs mine eth+lbc
I put my configuration to see if you can lend me a hand:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal miwallet.miworker -epsw x -dpool mine.pasl.fairpool.xyz:4009 -dwal <YOUR_PASL_ACCOUNT>+<WORKER_NAME> -dpsw x -tstop 85 -dcoin pasc
What will I be doing wrong?
regards
you need to manually tune (decrease) your -dcri parameter to restore ETH value. I'd start with '-dcri 1' and keep increasing until the eth hashrate drops too much. Also, you can increase power limit which could help both ETH and PASC climb back up You have discovered a new world, I have never used the -dcri xDD Thank you : )
|
|
|
|
ninjabull
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 11, 2017, 02:13:00 AM |
|
I'm having problems getting the miner to work (cannot allocate big buffer for DAG). I've tried increasing page file to 17-25GB, using the env. variables and even using the benchmark 10 flag. Nothing works, while etherminer is working fine. I have never been able to run this miner. Any suggestions? 04:18:38:819 1ff0 Check and remove old log files... 04:18:38:824 1ff0 args: -benchmark 10 04:18:38:827 1ff0 04:18:38:831 1ff0 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 04:18:38:835 1ff0 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º 04:18:38:838 1ff0 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 04:18:38:842 1ff0 04:18:39:703 1ff0 OpenCL platform: NVIDIA CUDA 04:18:39:708 1ff0 AMD OpenCL platform not found 04:18:40:451 1ff0 CUDA initializing...
04:18:40:456 1ff0 NVIDIA Cards available: 1 04:18:40:461 1ff0 CUDA Driver Version/Runtime Version: 9.1/8.0 04:18:40:466 1ff0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
04:18:40:471 1ff0 Total cards: 1 04:18:44:108 1ff0 No AMD cards in the list, ADL library will not be used. 04:18:44:114 1ff0 NVML version: 9.388.59 04:18:44:230 1ff0 CUDA error 0 #102 - 46 04:18:44:393 1ff0 CUDA error 0 #103 - 46 04:18:44:493 1ff0 CUDA error 0 #105 - 46 04:18:44:609 1ff0
04:18:44:614 1ff0 BENCHMARK MODE!
04:18:44:632 1e70 Setting DAG epoch #10... 04:18:45:075 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:45:080 970 ETH: GPU0 0.000 Mh/s 04:18:45:683 1e70 Setting DAG epoch #10 for GPU0 04:18:45:688 1e70 Create GPU buffer for GPU0 04:18:45:774 1e70 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
04:18:48:091 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:48:091 970 ETH: GPU0 0.000 Mh/s 04:18:48:794 1e70 Set global fail flag, failed GPU0 04:18:48:794 1e70 GPU 0 failed 04:18:48:794 1e74 Setting DAG epoch #10 for GPU0 04:18:48:894 1e74 GPU 0, CUDA error 46 - cannot write buffer for DAG
04:18:51:110 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:51:122 970 ETH: GPU0 0.000 Mh/s
Thank you. I left it and let it restart itself 10-12 times and then it started to work. I'm guessing this isn't normal?
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
December 11, 2017, 11:12:03 AM |
|
I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining. Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card? I am running windows 10 with v 10.2 with the August 23rd blockchain drivers. Would love a suggestion on how to get this to run stable and not have cards tripping out. I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up. Appreciate any thoughts. Thanks
I'm using this config. -epool eu1.ethermine.org:4444 -ewal xxxxx #-eworker -epsw x -esm 0 -allpools 1 -mode 1 -estale 1 -ethi 16 -gser 2 -wd 1 -r 0 -dbg -1 -tt 75 -ttdcr 80 -ttli 85 -tstop 90 -cclock 900 -cvddc 800 -mclock 1750 -mvddc 800 -powlim -10
Works like a charm on my 6x480 rig
|
|
|
|
cjclm7
Newbie
Offline
Activity: 25
Merit: 0
|
|
December 11, 2017, 11:38:30 AM |
|
I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining. Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card? I am running windows 10 with v 10.2 with the August 23rd blockchain drivers. Would love a suggestion on how to get this to run stable and not have cards tripping out. I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up. Appreciate any thoughts. Thanks
I'm using this config. -epool eu1.ethermine.org:4444 -ewal xxxxx #-eworker -epsw x -esm 0 -allpools 1 -mode 1 -estale 1 -ethi 16 -gser 2 -wd 1 -r 0 -dbg -1 -tt 75 -ttdcr 80 -ttli 85 -tstop 90 -cclock 900 -cvddc 800 -mclock 1750 -mvddc 800 -powlim -10
Works like a charm on my 6x480 rig If you are on Linux OS, may I suggest you do a simple test: stop miner, edit config.txt by adding comment (add #) on those 2 lines (# -cclock 900 and # -mclock 1750). Then restart the miner. Did you see any difference in the GPU´s hashrate?
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
December 11, 2017, 01:36:46 PM |
|
I mine on Windows but the answer would be yes. Besides, I use other tools to make sure my undervolting/underclocking works
|
|
|
|
entity279
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 11, 2017, 04:35:28 PM |
|
I'm having problems getting the miner to work (cannot allocate big buffer for DAG). I've tried increasing page file to 17-25GB, using the env. variables and even using the benchmark 10 flag. Nothing works, while etherminer is working fine. I have never been able to run this miner. Any suggestions? 04:18:38:819 1ff0 Check and remove old log files... 04:18:38:824 1ff0 args: -benchmark 10 04:18:38:827 1ff0 04:18:38:831 1ff0 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 04:18:38:835 1ff0 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º 04:18:38:838 1ff0 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 04:18:38:842 1ff0 04:18:39:703 1ff0 OpenCL platform: NVIDIA CUDA 04:18:39:708 1ff0 AMD OpenCL platform not found 04:18:40:451 1ff0 CUDA initializing...
04:18:40:456 1ff0 NVIDIA Cards available: 1 04:18:40:461 1ff0 CUDA Driver Version/Runtime Version: 9.1/8.0 04:18:40:466 1ff0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
04:18:40:471 1ff0 Total cards: 1 04:18:44:108 1ff0 No AMD cards in the list, ADL library will not be used. 04:18:44:114 1ff0 NVML version: 9.388.59 04:18:44:230 1ff0 CUDA error 0 #102 - 46 04:18:44:393 1ff0 CUDA error 0 #103 - 46 04:18:44:493 1ff0 CUDA error 0 #105 - 46 04:18:44:609 1ff0
04:18:44:614 1ff0 BENCHMARK MODE!
04:18:44:632 1e70 Setting DAG epoch #10... 04:18:45:075 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:45:080 970 ETH: GPU0 0.000 Mh/s 04:18:45:683 1e70 Setting DAG epoch #10 for GPU0 04:18:45:688 1e70 Create GPU buffer for GPU0 04:18:45:774 1e70 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
04:18:48:091 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:48:091 970 ETH: GPU0 0.000 Mh/s 04:18:48:794 1e70 Set global fail flag, failed GPU0 04:18:48:794 1e70 GPU 0 failed 04:18:48:794 1e74 Setting DAG epoch #10 for GPU0 04:18:48:894 1e74 GPU 0, CUDA error 46 - cannot write buffer for DAG
04:18:51:110 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 04:18:51:122 970 ETH: GPU0 0.000 Mh/s
Thank you. I left it and let it restart itself 10-12 times and then it started to work. I'm guessing this isn't normal? Yup. Only hints I have is (1 ) check your page file. You have a single card so you shouldn't need to much, just say 4 GB. (2) try a clean reinstalation of drivers or a install a different version
|
|
|
|
schilling2k
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 11, 2017, 05:25:48 PM |
|
Hey guys,
just a quick question: in general, what would you recommend for mining ethereum? Windows or Linux? Any additional thoughts on this?
Thanks & Best, Daniel
|
|
|
|
Ursul0
|
|
December 11, 2017, 06:21:34 PM |
|
I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining. Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card? I am running windows 10 with v 10.2 with the August 23rd blockchain drivers. Would love a suggestion on how to get this to run stable and not have cards tripping out. I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up. Appreciate any thoughts. Thanks
I'm using this config. -epool eu1.ethermine.org:4444 -ewal xxxxx #-eworker -epsw x -esm 0 -allpools 1 -mode 1 -estale 1 -ethi 16 -gser 2 -wd 1 -r 0 -dbg -1 -tt 75 -ttdcr 80 -ttli 85 -tstop 90 -cclock 900 -cvddc 800 -mclock 1750 -mvddc 800 -powlim -10
Works like a charm on my 6x480 rig no wonder it works like a charm. Are you getting 24MH/card at least?
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
December 11, 2017, 08:08:16 PM |
|
I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining. Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card? I am running windows 10 with v 10.2 with the August 23rd blockchain drivers. Would love a suggestion on how to get this to run stable and not have cards tripping out. I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up. Appreciate any thoughts. Thanks
I'm using this config. -epool eu1.ethermine.org:4444 -ewal xxxxx #-eworker -epsw x -esm 0 -allpools 1 -mode 1 -estale 1 -ethi 16 -gser 2 -wd 1 -r 0 -dbg -1 -tt 75 -ttdcr 80 -ttli 85 -tstop 90 -cclock 900 -cvddc 800 -mclock 1750 -mvddc 800 -powlim -10
Works like a charm on my 6x480 rig no wonder it works like a charm. Are you getting 24MH/card at least? Around that, yes. No noise, no heat, stable as hell, no complications whatsoever.
|
|
|
|
evertec
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 11, 2017, 09:53:18 PM |
|
I have two reference RX 480 cards, and had a lower power bios installed. With the recent versions of windows 10, it's giving me issues (wouldn't even install the updates until I removed both cards, locks up when installing new drivers). I'd like to go back to the original bios without having to patch the files, but when I install the original reference bios, I still get the errors in Device Manager where Windows stopped the device because it reported problems unless I re-patch the driver. Does anyone know if there's something else I need to do to get these cards back to stock state without having to run modified drivers? Thanks.
|
|
|
|
uDwcHYO
|
|
December 11, 2017, 10:35:16 PM |
|
a strange bug, when you connect to the RDP and run the miner, then the temperature of only one card is shown, but if the miner is launched from the autoload then when connected it shows the temperature of all the cards
|
zzz
|
|
|
Call_Me_Bambi
|
|
December 12, 2017, 12:52:36 AM |
|
Hey guys,
just a quick question: in general, what would you recommend for mining ethereum? Windows or Linux? Any additional thoughts on this?
Thanks & Best, Daniel
I think the consensus would be to use Linux for mining. I would like to get to know Linux, I have tried, but for ease I just use Windows. Linux has advantages, more stable and no annoying updates that trash your PC.
|
|
|
|
AlainC
Member
Offline
Activity: 91
Merit: 10
|
|
December 12, 2017, 11:49:04 AM |
|
I think the consensus would be to use Linux for mining. I would like to get to know Linux, I have tried, but for ease I just use Windows.Linux has advantages, more stable and no annoying updates that trash your PC. Key advantage of linux is ability to script everything... My rig is self-optimising, self-repairing, self-monitoring... BUT the key problems is that undervolting is very complex (requires VBIOS hex edit). I work on patching amdgpu initsequence to allow UV. I've advanced but sorry, I've too much work on many subjects...
|
|
|
|
nekajcasa
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 12, 2017, 03:08:42 PM |
|
Hi,
I am new to this so pleas forgive me if something like this was already mentioned or resolved...
So I am mining ETH with two Redon 280x... All was going well, but the after resetting my PC I can not mine anymore, I get error (OpenCL error -4 (0) - cannot create DAG on GPU), however if I disconnect one card there are no errors... I have set virtual memory to 16 GB.
Can someone please help me, I can provide log files, I will run mine ETH for few days for you if you help me resolve this problem.
|
|
|
|
sergitocrf
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 12, 2017, 03:28:55 PM |
|
Can someone help me? I've got 6 x rx 580 nitro+ but I can only run 4 when I put the 5th the program only recognize 4 and the rate of mining down. With 4 I am mining 124.5 mh/s but when I put 5 (only works 4) and I am mining 82mh/s.
This is my SimpleMining config: Using claymore-eth-v10.2
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $wallet/$name -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
And this is my OC SM: Core MHz: 1200 Memory MHz: 2250 Core Undervolting: 850 PowerStage: 3 Target cº: 64 Minimum Fan speed: 50
MotherBoard: Asus B250 Expert miminig Power supply: HXCorsair 1200i
With 4 graphics 640w from the wall so I dont thing that the problem is the power supply. any ideas?
Thanks in advance
|
|
|
|
ascaloon
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 12, 2017, 05:22:37 PM |
|
Can someone help me? I've got 6 x rx 580 nitro+ but I can only run 4 when I put the 5th the program only recognize 4 and the rate of mining down. With 4 I am mining 124.5 mh/s but when I put 5 (only works 4) and I am mining 82mh/s.
This is my SimpleMining config: Using claymore-eth-v10.2
-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $wallet/$name -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1
And this is my OC SM: Core MHz: 1200 Memory MHz: 2250 Core Undervolting: 850 PowerStage: 3 Target cº: 64 Minimum Fan speed: 50
MotherBoard: Asus B250 Expert miminig Power supply: HXCorsair 1200i
With 4 graphics 640w from the wall so I dont thing that the problem is the power supply. any ideas?
Thanks in advance
Did you check your BIOS settings on motherboard? (It can recognise max. 4 cards by default.)
|
|
|
|
flip81
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 12, 2017, 05:56:19 PM |
|
hi everyone,
I mining 2 months with simplemining.net without problem. the last week or two not running stable, im the only having issues?
|
|
|
|
MohXin
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 12, 2017, 06:03:11 PM |
|
Hi guys i have a strange problem with my rig 8 rx 580gb nitro+ is having low hashrate only 19mh/s without overclocking and all together only 145mh/s please help
|
|
|
|
drevil6666
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 12, 2017, 06:05:25 PM Last edit: December 12, 2017, 06:27:26 PM by drevil6666 |
|
Good afternoon. The problem is as follows. Version 10.1 and 10.2 did not work correctly with the new drivers win10-64bit-radeon-software-adrenalin-edition-17.12.1-dec11 At any time, the mining hangs, and does not even respond to the set restart parameter -r video rx 460 Also does not determine the temperature of the video card and fans
|
|
|
|
|