Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[bluspirit]

Hi,

I am new to this so pleas forgive me if something like this was already mentioned or resolved...

So I am mining ETH with two Redon 280x... All was going well, but the after resetting my PC I can not mine anymore, I get error (OpenCL error -4 (0) - cannot create DAG on GPU), however if I disconnect one card there are no errors... I have set virtual memory to 16 GB.

Can someone please help me, I can provide log files, I will run mine ETH for few days for you if you help me resolve this problem.

Which PSU, which OS, which driver version and which miner version are you using?

[spupapi]

Hello guys,

I am new here, but I've been getting this error:


"socket was closed remotely (by pool)"
ETH: Connection lost, retry in 20 sec...

GPU0 t=50C fan=27%, GPU1 t=44C fan 0%, GPU 2 t=49C fan=25%, GPU3 t=52C fan=25%, gpu4 t=51C fan=27%
ETH: Stratum - connecting to 'eu2.ethermine.org' <46.105.121.53> port 4444
ETH: Stratum - connected (eu2.ethermine.org:4444)
ETH: Autorized
ETH: 12/12/17 - 23:44:18 - new job from eu2.ethermine.org:4444 (FAILOVER 3)

and then it just repeats this error.

I am mining on claymore, my hardware is 5x AMD RX580 and I am mining ethereum only.


Is it working or not?

[CryptoParadigm]

Hi guys where can find the Google link ?
Can some one re-post it please?

[rascao]

Hello guys,

I am new here, but I've been getting this error:


"socket was closed remotely (by pool)"
ETH: Connection lost, retry in 20 sec...

GPU0 t=50C fan=27%, GPU1 t=44C fan 0%, GPU 2 t=49C fan=25%, GPU3 t=52C fan=25%, gpu4 t=51C fan=27%
ETH: Stratum - connecting to 'eu2.ethermine.org' <46.105.121.53> port 4444
ETH: Stratum - connected (eu2.ethermine.org:4444)
ETH: Autorized
ETH: 12/12/17 - 23:44:18 - new job from eu2.ethermine.org:4444 (FAILOVER 3)

and then it just repeats this error.

I am mining on claymore, my hardware is 5x AMD RX580 and I am mining ethereum only.


Is it working or not?

you need to check the adress and port, if everything its ok chek if you need to put special ESM value, cheking the ethermine pool this is the 2 pool for UE Europe (France): eu1.ethermine.org:4444 or eu1.ethermine.org:14444 try those frist

[joe318]

Hello pp,

I'm trying the latest driver from amd, but i have one problem, cant do nothing in afterburner, someone with the same problem?

Regards,

[jimmykl]

to author

On Linux version Claymore  can allowed detect run Youtube  and stop mining every time when played youtube video?
I use my pc to work and mine with 2 card. but i cannt everytime automatically click stop mining and start mining
its can added as option to config - allow or disable

please add if possible. 
Youtube can be lightly detected by window header title.

Oh and while you're at it can you please add a feature to check my email during work hours and reply with some form of AI? It shouldn't take long and is really an essential feature for a miner in 2017.

[Njeroe]

Hello pp,

I'm trying the latest driver from amd, but i have one problem, cant do nothing in afterburner, someone with the same problem?

Regards,

Afterburner on driver version after 17.7.2 is not working...

[golden0707]

To developer.

Please plan to modify your miner to restart itselt if some threshhold of incorrect shares reaches.

I think it could be usefull.

[n1san]

Hi guys who tried new drivers 17.12.1 (adrenaline), Claymore 10.2 can not control frequencies and fans

[svyatko]

hey guys. what sort of decent hashrate should i be expecting from an Asus dual 1070 card ? i am getting an average ETH @ 26.200Mh/s and DRC @ 435MH/s . Does this sound right ?

Thanks

[Johnnydex]

Hi guys who tried new drivers 17.12.1 (adrenaline), Claymore 10.2 can not control frequencies and fans

Tried them last night but immediately rolled back to previous driver. Looks like none of the config parameters are being passed through to cards. AMD have implemented the ability to save profiles in Wattman so I guess maybe something about that has broken that functionality in Claymore?? Also 17.12.1 reoriented all my cards, not a huge deal but still a pain in the butt with my setup.

[AlainC]

Just reporting about AMDGPU-PRO v17.50 drivers.
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-for-Linux-Release-Notes.aspx
http://support.amd.com/en-us/kb-articles/Pages/Installation-Instructions-for-amdgpu-Graphics-Stacks.aspx
The driver architecture seems to have evolved, and some option seems to install new opensource components (from Vulkan, ROCm OpenCL libs - Phoronix make article on that), but you can install legacy version.

I've installed with deprecated option on latest Ubuntu LTS update 16.04.3, kernel 4.10
./amdgpu-pro-install -y --compute
(in fact: ./amdgpu-pro-install -y --headless --opencl=legacy )
It finally worked nice, with no change in performance

however big warning: do clean uninstall before. I had initially installed the full amdgpu-pro with X11, then the --compute version headless, and when I installed v17.50 in compute mode, it could not compile the driver, and there was broken dependencies in apt-get... finally I hade to use dpkg --purge on all amdgpu related components, especially X11 libs, opencl libs...

Anyway, I see no improvement. is there some improvement to expect with v17.50 ? I use -mode 1 -asm 2 -etha 1 fro RX480/580... is there some prefered settings today ?

best regards.

[asalami]

Hi guys i have a strange problem with my rig 8 rx 580gb nitro+ is having low hashrate only 19mh/s without overclocking and all together only 145mh/s please help

Most likely you did not set the compute workload for each of your cards in AMD settings. Alternatively, you can use the blockchain driver and then you dont' need to set everything

like from where i can do those settings & how to download blockchain drivers? this is my first time

[crypper]

Hi guys i have a strange problem with my rig 8 rx 580gb nitro+ is having low hashrate only 19mh/s without overclocking and all together only 145mh/s please help

Most likely you did not set the compute workload for each of your cards in AMD settings. Alternatively, you can use the blockchain driver and then you dont' need to set everything

like from where i can do those settings & how to download blockchain drivers? this is my first time

Give me some time. I'm creating a video tutorial for you how to download the driver...

[Zorr0]

Hello everyone.
Just wanted to ask for summary on best software to run with RX cards.
I would say:
claymore miner
GPUz to get info on gpus
HWinfo64 to check on memory errors
setting up clocks and voltage works best in claymore or overdriventool
BIOS mod: atiflash 277 and Plarisbioseditor(not sure which version is better)
As far as fan controls I am no sure. Claymore doesn't seem to set the fanspeed reliably, sometimes fans just stop completely on good cards, which is undesirable.

Anything else anyone might add?

[Jonet]

hey guys. what sort of decent hashrate should i be expecting from an Asus dual 1070 card ? i am getting an average ETH @ 26.200Mh/s and DRC @ 435MH/s . Does this sound right ?

I'm getting ETH 30 and SIA 350 with that exact card. Memclock +530.

[yonton]

Still no AMD compute driver for windows 8.1? Dag is killing me ;(

[Whitehawk29]

Hi all, I have a little problem, when I close and restart the claymore miner, only first GPU fan % is shown in the miner and in the monitoring tool.
I need to restart the computer to resolve that .. is there any workaround ?
Thank you !

[Omarko]

hi guys,

I just built a new rig, Fatal1ty H270 Performance with 4GB ram, I3 cpu and 6 x asus radeon rx 570 expedition oc

When I installed 2 cards first on their own in PCIe slots, then windows 10 etc , blockchain drivers plsu patchers I would get solid 27MH/s (BIOS moded on all cards).

then, I moved the mobo to open case and plugged all six GPUs in using PCIe risers, installed drivers etc, then used the patcher, I can see in GPUz all cards have correct drivers etc.

I run Claymore , it detects 6 cards, stars mining and all I get is 21mh/s

any idea what am I doing wrong please?

[garybeng]

I have tried mining with Claymore miner v10.2 but have being getting high stale shares of 10 to 12%.
When I was using v9.8, my stale shares are only about 4%.
Any advice?

Thanks