wtfonly16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2018, 09:54:15 PM |
|
I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed
set the other 5 to compute mode
|
ye i aint bares
|
|
|
ljbawss
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2018, 11:08:31 PM |
|
I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed
Does the problem persist if you use a different miner, such as Ethminer 0.12.0? Tried Ethminer but the text appears really slow, can't use it I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed
set the other 5 to compute mode Thanks alot! They were indeed set back to Graphic (I changed them to compute in the past but didn't think about it now). All cards run at equal speeds now. The bot does crash after some minutes though, guess I have to play with afterburner again.
|
|
|
|
|
wtfonly16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 02:21:22 AM |
|
|
ye i aint bares
|
|
|
BulldogPO
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 06:24:47 AM |
|
I tried to mod bios but now Windows does BSOD when installing blockchain drivers.
Try installing the latest 17.12.2 Adrenalin drivers. After it installed you can set the Compute mode in the settings. Radeon settings -> Gaming -> Global settings -> Per GPU - Compute mode Also how did you mod? Did you download the BIOS from your card and edit that? Could be that the changes are too high for your card and when it initialises it crashes. I restored original ASUS bios to my RX 570 4GB cards, removed drivers totally with DDU, rebooted, installed Adrenalin 17.12.2 drivers, rebooted, switched to compute mode, updated Claymore to v10.4 and now I got 16MH/s Ethereum speed per card ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) What next?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 12:52:03 PM Last edit: January 18, 2018, 01:23:32 PM by Claymore |
|
v10.5:
- applied another workaround for ADL, you must not see "Temperature control thread hangs" message now. - added version for CUDA 9.1. - now miner shows a warning if you enabled full remote management (-mport > 0) and did not specify -mpsw parameter. - now miner shows a warning if you specified default ETH wallet (from default start.bat).
|
|
|
|
BulldogPO
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 12:54:49 PM |
|
I tried to mod bios but now Windows does BSOD when installing blockchain drivers.
Try installing the latest 17.12.2 Adrenalin drivers. After it installed you can set the Compute mode in the settings. Radeon settings -> Gaming -> Global settings -> Per GPU - Compute mode Also how did you mod? Did you download the BIOS from your card and edit that? Could be that the changes are too high for your card and when it initialises it crashes. I restored original ASUS bios to my RX 570 4GB cards, removed drivers totally with DDU, rebooted, installed Adrenalin 17.12.2 drivers, rebooted, switched to compute mode, updated Claymore to v10.4 and now I got 16MH/s Ethereum speed per card ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) What next? Can you check HWMonitor and see if your cards are going to full clocks? I had an issue that some cards get stuck on half/low clocks. I fixed it by adding -minspeed so the miner restarts when a specific speed isnt met. This way it will restart untill its corrected. Also -lidag 1 can help not getting them stuck. I check that today and will report back. Looks like Afterburner is not working while GPU´s are in compute mode?
|
|
|
|
dwdhu
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 12:56:12 PM |
|
hi, please submit your updated hashrate results to https://gpustats.com thank you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
kkourmousis
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 01:44:18 PM |
|
Is it really so, that mining two coins doesn’t decrease Ethereum hashrate? What is the best coin to mine with Ethereum?
Yes it does lower the ethereum hash rate. Most people think the decrease is not significant. Check what to mine for profitability on the second coin, knowing this always changes. I like Decred But the profits from the second coin outweighs the 2% devfee (instead of 1%) and the decrease in the ethereum hashrate? You have more factors to consider if you must wether dual mining is profitable for you: - lower ETH hashrate
- +1% dev fee
- +power consumption (which is pretty much actually)
- higher temperatures
- faster hardware wear
all of the above factors are different for each gpu, so do your research In my 580s, it is indeed profitable to mine ETH + DCR (even though in my country I pay 0.3$/kwh ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) )
|
Buy me a souvlaki: ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx
|
|
|
androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 01:49:23 PM |
|
Claymore, your miner is logging the following messsge: AMD topology bug detected, fix it. I don't really know what this means, so I don't know how to address it, or if it needs to be addressed. 4x rx 570 and 1x gtx 1070. Stable on latest adrenalin driver and latest GeForce running v10.4. Can you help me understand this message? If it helps, I have another rig that does not get this message. 5x rx 580 and 1x gtx 1070. Stable on aug23 blockchain driver and latest GeForce, running v10.4. Both win10 pro.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 01:56:11 PM |
|
Claymore, your miner is logging the following messsge: AMD topology bug detected, fix it. I don't really know what this means, so I don't know how to address it, or if it needs to be addressed. 4x rx 570 and 1x gtx 1070. Stable on latest adrenalin driver and latest GeForce running v10.4. Can you help me understand this message? If it helps, I have another rig that does not get this message. 5x rx 580 and 1x gtx 1070. Stable on aug23 blockchain driver and latest GeForce, running v10.4. Both win10 pro. Don't worry about this message, it means that miner applies a workaround for bug in Adrenalin drivers which breaks temperature/fan management.
|
|
|
|
androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 01:57:33 PM |
|
Thank you for the quick and helpful response.
|
|
|
|
Sparki01
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 02:00:21 PM |
|
v10.5:
- applied another workaround for ADL, you must not see "Temperature control thread hangs" message now. - added version for CUDA 9.1. - now miner shows a warning if you enabled full remote management (-mport > 0) and did not specify -mpsw parameter. - now miner shows a warning if you specified default ETH wallet (from default start.bat).
wow, this version 10.5 runs HOT (compared to 10.3). at least 3-4 degrees hotter on each card (CUDA 8.0) and 5-6 degrees hotter on each card (CUDA 9.1), anyone else seeing this? 4x GTX1070 On the up side works ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) never seen it kick in before...
|
|
|
|
tf2addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 03:13:05 PM |
|
And yet And it still exists?
|
|
|
|
luis31
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 04:12:15 PM |
|
okay my sollution was: i decided to change the grafikcards, i use actually only nvidia cards.
but now i have the next problem i use 13 gtx 1070 cards they run without problems but how can i overclock all cards? msi afterburner shows me only 8 cards i cant overclock the forther 5 cards?
it is not easy to assemble an good rig... but problems are here to solve it... :-)
i will rise the amount of the cards to 18 is this possibel with the asus mining exptert mobo?
thanks...
|
|
|
|
toxiroxi
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 04:19:23 PM |
|
hi guys, maybe someone can help. i have a problem which i cannot really identify. I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows. The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same. But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help. Any ideas? I have attached the last lines from the claymore logfile. btw. i am running 10.3. Thanks so much for your help - i would be great getting those freezing state rid of. rebooting is ok, but it doesnt at some point.... ETH: 01/18/18-14:59:08 - New job from eu1.ethermine.org:4444 14:59:08:700 a88 target: 0x0000000112e0be82 (diff: 4000MH), epoch 164(2.28GB) 14:59:08:716 a88 ETH - Total Speed: 57.854 Mh/s, Total Shares: 476, Rejected: 0, Time: 09:24 14:59:08:716 a88 ETH: GPU0 29.061 Mh/s, GPU1 28.794 Mh/s 14:59:08:716 a88 SC - Total Speed: 1041.379 Mh/s, Total Shares: 240, Rejected: 0 14:59:08:716 a88 SC: GPU0 523.090 Mh/s, GPU1 518.289 Mh/s 14:59:18:873 a88 got 248 bytes 14:59:18:873 a88 buf: {"id":0,"jsonrpc":"2.0","result":["0x2aa5cfd97efc69f86d2396d0502a258b70e51cce1576b4177bf1adcd69fe4825","0xd5d85ca51867514082660716ef2bedbb55a65250622456390b4a76c4fe98db95","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4b37ad"]}
14:59:18:873 a88 parse packet: 247 14:59:18:873 a88 ETH: job changed 14:59:18:873 a88 new buf size: 0 14:59:18:889 a88 ETH: 01/18/18-14:59:18 - New job from eu1.ethermine.org:4444 14:59:18:889 a88 target: 0x0000000112e0be82 (diff: 4000MH), epoch 164(2.28GB) 14:59:18:889 a88 ETH - Total Speed: 59.505 Mh/s, Total Shares: 476, Rejected: 0, Time: 09:25 14:59:18:889 a88 ETH: GPU0 29.096 Mh/s, GPU1 30.409 Mh/s 14:59:18:904 a88 SC - Total Speed: 1071.093 Mh/s, Total Shares: 240, Rejected: 0 14:59:18:904 a88 SC: GPU0 523.726 Mh/s, GPU1 547.367 Mh/s 14:59:19:701 a88 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x38b356a", "0x0000000000000000000000000000000000000000000000000000000006bac143"]}
14:59:19:748 a88 got 39 bytes 14:59:19:748 a88 buf: {"id":6,"jsonrpc":"2.0","result":true}
14:59:19:748 a88 parse packet: 38 14:59:19:748 a88 new buf size: 0 14:59:22:764 11fc em hbt: 15, dm hbt: 15, fm hbt: 62, 14:59:22:764 11fc watchdog - thread 0 (gpu0), hb time 125 14:59:22:764 11fc watchdog - thread 1 (gpu0), hb time 46 14:59:22:764 11fc watchdog - thread 2 (gpu1), hb time 62 14:59:22:764 11fc watchdog - thread 3 (gpu1), hb time 140 14:59:29:249 d7c GPU0 t=58C fan=55%, GPU1 t=68C fan=86% 14:59:30:827 a88 ETH: checking pool connection... 14:59:30:827 a88 send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
14:59:30:874 a88 got 248 bytes 14:59:30:874 a88 buf: {"id":3,"jsonrpc":"2.0","result":["0x2aa5cfd97efc69f86d2396d0502a258b70e51cce1576b4177bf1adcd69fe4825","0xd5d85ca51867514082660716ef2bedbb55a65250622456390b4a76c4fe98db95","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4b37ad"]}
14:59:30:874 a88 parse packet: 247 14:59:30:874 a88 ETH: job is the same 14:59:30:874 a88 new buf size: 0 14:59:39:719 a88 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x37ac1b4", "0x0000000000000000000000000000000000000000000000000000000006bac143"]}
14:59:39:766 a88 got 39 bytes 14:59:39:766 a88 buf: {"id":6,"jsonrpc":"2.0","result":true}
14:59:39:766 a88 parse packet: 38 14:59:39:766 a88 new buf size: 0 there is no error or anything in the log - this are the last lines before hanging..... any ideas or help is appreciated. thanks in advance!
|
|
|
|
embombed
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 04:41:56 PM |
|
Anyone have any luck getting 10.4 running on Vega 64 running ubuntu 16.04.03 ?
getting the following: \ AMD Cards available: 1 GPU #0: gfx900 (Device 687f), 8176 MB available, 64 compute units (pci bus 3:0:0) GPU #0 recognized as Vega POOL/SOLO version Cannot build OpenCL program for GPU 0 GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 AMD ADL library not found.
No pool specified for Decred! Ethereum-only mining mode is enabled ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: miner-proxy stratum mode Watchdog enabled
ETH: Authorized Setting DAG epoch #164...
GPU #0: gfx900 (Device 687f), 8176 MB available, 64 compute units (pci bus 3:0:0) ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 0.000 Mh/s Pool switches: ETH - 0 Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 164(2.28GB) GPU0 t=62C fan=13%
Setting DAG epoch #164 for GPU0 Create GPU buffer for GPU0 GPU0, OpenCL error -48 (0) - cannot create DAG on GPU GPU 0 failed
|
|
|
|
Victorio
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 04:50:27 PM |
|
I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows.
The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same. But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help.
Have you disabled Windows Updates and Driver Update? You can use Win 10 tweakers to do it, e.g. Win 10 Spy Disabler. I've seen similar issues when a new driver is installed from Windows Update repository.
|
|
|
|
toxiroxi
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 04:54:40 PM |
|
I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows.
The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same. But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help.
Have you disabled Windows Updates and Driver Update? You can use Win 10 tweakers to do it, e.g. Win 10 Spy Disabler. I've seen similar issues when a new driver is installed from Windows Update repository. Thanks for your reply - yes those are disable, but i will double check again to be sure.
|
|
|
|
Swiped
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 18, 2018, 05:06:51 PM Last edit: January 18, 2018, 05:23:28 PM by Swiped |
|
Hi, I'm new here, I don't know if other have this problem. Mining just ethereum work great, really stable for days at fast rate. Dual with lbry make the rig crash/reboot every 2-5 minutes or so... max I got was 17 minutes I also re-flash with original bios, without OC and it's still rebooting... my rig: -win 10 -Biostar Motherboard TB250-BTC Core -4x sapphire nitro+ rx 570 8gb samsung -2x sapphire nitro+ rx 570 8gb hynix -4gb ram -120G ssd -virtual memory 20-60gb (I know it's excessive) one thing I found interresting is when claymore dual is used by nicehash, the computer doesn't reboot. I also tried the -ethi 2 option without change. tried 10.0 10.3 and 10.4 I tried for many hours, but I'll mine just ethereum untill it's stable for me. I can try things if you want. Will sure try the next version. But want to informe you in case it help. here the last part of logfile... thank you! 09:22:54:907 1ea0 ETH: checking pool connection... 09:22:54:907 1ea0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:22:55:017 1ea0 got 243 bytes 09:22:55:017 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x39fa8daae61ea9271acb4e190cfa33638ff5c908cded462db2fc75c7af23cc51","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:22:55:032 1ea0 parse packet: 242 09:22:55:032 1ea0 ETH: job is the same 09:22:55:032 1ea0 new buf size: 0 09:22:56:220 1e94 LBC: put share nonce 93a5ed enonce 98d 09:22:56:236 1e94 LBC round found 1 shares 09:22:56:251 1eb0 LBC: 01/16/18-09:22:56 - SHARE FOUND - (GPU 4) 09:22:56:251 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "8d090000", "5a5e0aa2", "0093a5ed"], "id": 14, "method": "mining.submit"}
09:22:56:283 1eb0 got 37 bytes 09:22:56:283 1eb0 buf: {"id":14,"result":true,"error":null}
09:22:56:283 1eb0 parse packet: 36 09:22:56:283 1eb0 LBC: Share accepted (16 ms)! 09:22:56:298 1eb0 new buf size: 0 09:23:04:924 1ea0 ETH: checking pool connection... 09:23:04:924 1ea0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:23:05:049 1ea0 got 243 bytes 09:23:05:049 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x39fa8daae61ea9271acb4e190cfa33638ff5c908cded462db2fc75c7af23cc51","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:05:049 1ea0 parse packet: 242 09:23:05:049 1ea0 ETH: job is the same 09:23:05:065 1ea0 new buf size: 0 09:23:10:346 1ea0 got 243 bytes 09:23:10:346 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0xf52876b64c18f696f331750fa60d61aaa3735b479e57b81c6c3b09d48e4edf03","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:10:346 1ea0 parse packet: 242 09:23:10:346 1ea0 ETH: job changed 09:23:10:362 1ea0 new buf size: 0 09:23:10:362 1ea0 ETH: 01/16/18-09:23:10 - New job from eth-us-east1.nanopool.org:9999 09:23:10:362 1ea0 target: 0x000000006df37f67 (diff: 10000MH), epoch 163(2.27GB) 09:23:10:378 1ea0 ETH - Total Speed: 174.988 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00 09:23:10:378 1ea0 ETH: GPU0 28.119 Mh/s, GPU1 29.672 Mh/s, GPU2 29.690 Mh/s, GPU3 29.692 Mh/s, GPU4 29.700 Mh/s, GPU5 28.115 Mh/s 09:23:10:378 1ea0 LBC - Total Speed: 448.404 Mh/s, Total Shares: 6, Rejected: 0 09:23:10:378 1ea0 LBC: GPU0 72.054 Mh/s, GPU1 76.034 Mh/s, GPU2 76.081 Mh/s, GPU3 76.086 Mh/s, GPU4 76.106 Mh/s, GPU5 72.043 Mh/s 09:23:10:596 1e84 LBC: put share nonce 6229b8 enonce e45 09:23:10:612 1e84 LBC round found 1 shares 09:23:10:628 1eb0 LBC: 01/16/18-09:23:10 - SHARE FOUND - (GPU 2) 09:23:10:628 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "450e0000", "5a5e0aa2", "006229b8"], "id": 12, "method": "mining.submit"}
09:23:10:659 1eb0 got 37 bytes 09:23:10:659 1eb0 buf: {"id":12,"result":true,"error":null}
09:23:10:659 1eb0 parse packet: 36 09:23:10:659 1eb0 LBC: Share accepted (32 ms)! 09:23:10:674 1eb0 new buf size: 0 09:23:14:003 1ea0 got 243 bytes 09:23:14:003 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:14:003 1ea0 parse packet: 242 09:23:14:019 1ea0 ETH: job changed 09:23:14:019 1ea0 new buf size: 0 09:23:14:019 1ea0 ETH: 01/16/18-09:23:14 - New job from eth-us-east1.nanopool.org:9999 09:23:14:019 1ea0 target: 0x000000006df37f67 (diff: 10000MH), epoch 163(2.27GB) 09:23:14:034 1ea0 ETH - Total Speed: 173.727 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01 09:23:14:034 1ea0 ETH: GPU0 27.865 Mh/s, GPU1 29.571 Mh/s, GPU2 29.407 Mh/s, GPU3 29.407 Mh/s, GPU4 29.584 Mh/s, GPU5 27.893 Mh/s 09:23:14:034 1ea0 LBC - Total Speed: 445.172 Mh/s, Total Shares: 7, Rejected: 0 09:23:14:050 1ea0 LBC: GPU0 71.403 Mh/s, GPU1 75.776 Mh/s, GPU2 75.356 Mh/s, GPU3 75.354 Mh/s, GPU4 75.808 Mh/s, GPU5 71.475 Mh/s 09:23:14:675 1e24 em hbt: 15, dm hbt: 15, fm hbt: 62, 09:23:14:675 1e24 watchdog - thread 0 (gpu0), hb time 140 09:23:14:691 1e24 watchdog - thread 1 (gpu0), hb time 94 09:23:14:691 1e24 watchdog - thread 2 (gpu1), hb time 16 09:23:14:706 1e24 watchdog - thread 3 (gpu1), hb time 109 09:23:14:706 1e24 watchdog - thread 4 (gpu2), hb time 78 09:23:14:706 1e24 watchdog - thread 5 (gpu2), hb time 15 09:23:14:706 1e24 watchdog - thread 6 (gpu3), hb time 78 09:23:14:722 1e24 watchdog - thread 7 (gpu3), hb time 31 09:23:14:722 1e24 watchdog - thread 8 (gpu4), hb time 125 09:23:14:722 1e24 watchdog - thread 9 (gpu4), hb time 62 09:23:14:722 1e24 watchdog - thread 10 (gpu5), hb time 47 09:23:14:737 1e24 watchdog - thread 11 (gpu5), hb time 141 09:23:14:894 1ea0 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xa04a645", "0x000000000000000000000000000000000000000000000000000000004c5d5488"]}
09:23:14:941 1ea0 ETH: checking pool connection... 09:23:14:941 1ea0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:23:15:050 1ea0 got 243 bytes 09:23:15:066 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:15:066 1ea0 parse packet: 242 09:23:15:066 1ea0 ETH: job is the same 09:23:15:112 1ea0 new buf size: 0 09:23:15:831 1e7c LBC: put share nonce 1fedd4 enonce fe7 09:23:15:831 1e7c LBC round found 1 shares 09:23:15:847 1eb0 LBC: 01/16/18-09:23:15 - SHARE FOUND - (GPU 1) 09:23:15:847 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "e70f0000", "5a5e0aa2", "001fedd4"], "id": 11, "method": "mining.submit"}
09:23:15:878 1eb0 got 37 bytes 09:23:15:878 1eb0 buf: {"id":11,"result":true,"error":null}
09:23:15:878 1eb0 parse packet: 36 09:23:15:878 1eb0 LBC: Share accepted (31 ms)! 09:23:15:894 1eb0 new buf size: 0 09:23:19:582 1e88 ETH: put share nonce ad68f22c0965c4a5 09:23:19:597 1e88 ETH round found 1 shares 09:23:19:613 1ea0 ETH: 01/16/18-09:23:19 - SHARE FOUND - (GPU 3) 09:23:19:613 1ea0 send: {"id":13,"method":"eth_submitWork","params":["0xad68f22c0965c4a5","0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xd23d945fd9c7ec7f2baa1449d9efb5184d3a56d4b8d101651bd763296c1f64cd"]}
09:23:19:738 1ea0 got 40 bytes 09:23:19:738 1ea0 buf: {"jsonrpc":"2.0","id":13,"result":true}
09:23:19:754 1ea0 parse packet: 39 09:23:19:769 1ea0 ETH: Share accepted (156 ms)!
09:23:19:769 1ea0 new buf size: 0 09:23:20:660 1eb0 got 649 bytes 09:23:20:660 1eb0 buf: {"id":null,"method":"mining.notify","params":["9c21","777aa9cb6e50a36f3870ee91bf56d240673fe4bcca0eaf59e414bb261ed2a8ad","dc093acdf48832de3c94cfd0c710b6f172d694488985161e332dca93af5d4fd1","01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff1d0368ac0404d90a5e5a08","0a2f436f696e4d696e652f0000000001e07823c1080000001976a9140f67e4482043a67dc028142eba63ba77a509c3d388ac00000000",["a344233225b4abac438740605ccdd3fcfae183dc9b4d22c2504d0334e6440b39","86b4f6de38cbfebadf4f114144055ee66cf15c17f6c8c4066928cf8ed356de2d","4e8d54e9533c59653ec5edaaa85dae36f970d49e615374a3c2a9e4142c9c56ef"],"20000000","1a0aafc9","5a5e0ad9",false]}
09:23:20:660 1eb0 parse packet: 648 09:23:20:676 1eb0 new buf size: 0 09:23:20:676 1eb0 LBC: 01/16/18-09:23:20 - New job from lbc.coinmine.pl:8787 09:23:20:676 1eb0 target: 0x00000000ffff0000 (diff: 4295MH) 09:23:21:504 1e94 LBC: put share nonce 39a53f enonce 39 09:23:21:504 1e94 LBC round found 1 shares 09:23:21:519 1eb0 LBC: 01/16/18-09:23:21 - SHARE FOUND - (GPU 4) 09:23:21:519 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "39000000", "5a5e0ad9", "0039a53f"], "id": 14, "method": "mining.submit"}
09:23:21:551 1eb0 got 37 bytes 09:23:21:551 1eb0 buf: {"id":14,"result":true,"error":null}
09:23:21:551 1eb0 parse packet: 36 09:23:21:551 1eb0 LBC: Share accepted (31 ms)! 09:23:21:566 1eb0 new buf size: 0 09:23:23:535 1e28 GPU0 t=61C fan=49%, GPU1 t=57C fan=42%, GPU2 t=55C fan=37%, GPU3 t=59C fan=47%, GPU4 t=58C fan=47%, GPU5 t=58C fan=43% 09:23:24:957 1ea0 ETH: checking pool connection... 09:23:24:957 1ea0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:23:25:067 1e90 LBC: put share nonce 20c96a enonce 158 09:23:25:082 1ea0 got 243 bytes 09:23:25:082 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:25:098 1ea0 parse packet: 242 09:23:25:098 1ea0 ETH: job is the same 09:23:25:114 1ea0 new buf size: 0 09:23:25:114 1eb0 LBC: 01/16/18-09:23:25 - SHARE FOUND - (GPU 4) 09:23:25:114 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "58010000", "5a5e0ad9", "0020c96a"], "id": 14, "method": "mining.submit"}
09:23:25:082 1e90 LBC round found 1 shares 09:23:25:145 1eb0 got 37 bytes 09:23:25:145 1eb0 buf: {"id":14,"result":true,"error":null}
09:23:25:145 1eb0 parse packet: 36 09:23:25:145 1eb0 LBC: Share accepted (16 ms)! 09:23:25:160 1eb0 new buf size: 0 09:23:28:614 1e7c LBC: put share nonce 8695b6 enonce 27f 09:23:28:614 1e7c LBC round found 1 shares 09:23:28:630 1eb0 LBC: 01/16/18-09:23:28 - SHARE FOUND - (GPU 1) 09:23:28:630 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "7f020000", "5a5e0ad9", "008695b6"], "id": 11, "method": "mining.submit"}
09:23:28:661 1eb0 got 37 bytes 09:23:28:661 1eb0 buf: {"id":11,"result":true,"error":null}
09:23:28:661 1eb0 parse packet: 36 09:23:28:661 1eb0 LBC: Share accepted (32 ms)! 09:23:28:676 1eb0 new buf size: 0 09:23:30:317 1e84 LBC: put share nonce 66f32b enonce 311 09:23:30:317 1e84 LBC round found 1 shares 09:23:30:333 1eb0 LBC: 01/16/18-09:23:30 - SHARE FOUND - (GPU 2) 09:23:30:333 1eb0 send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "11030000", "5a5e0ad9", "0066f32b"], "id": 12, "method": "mining.submit"}
09:23:30:364 1eb0 got 37 bytes 09:23:30:364 1eb0 buf: {"id":12,"result":true,"error":null}
09:23:30:364 1eb0 parse packet: 36 09:23:30:364 1eb0 LBC: Share accepted (32 ms)! 09:23:30:380 1eb0 new buf size: 0 09:23:34:911 1ea0 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xa543fb3", "0x000000000000000000000000000000000000000000000000000000004c5d5488"]}
09:23:34:974 1ea0 ETH: checking pool connection... 09:23:34:974 1ea0 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
09:23:35:099 1ea0 got 243 bytes 09:23:35:099 1ea0 buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
09:23:35:115 1ea0 parse packet: 242 09:23:35:115 1ea0 ETH: job is the same 09:23:35:130 1ea0 new buf size: 0
Did you ever solve this? I have 4 rigs running similar Sapphire 570 8g cards, (2X6) with Hynix, (1X6) with Micron, and (1X6) with Samsung, only the Samsung cards run stable and the other three are incredibly unstable. I have purchased some new riser cards just to make sure I didn't get a bad batch. I have tried every setting and bios change under the sun and can't get them stable. They just hang in open cl and reset. Never seen this in any of my other rigs, just on the Sapphire 570 8g cards. I am beginning to believe it is just a lousy batch of cards. I'll let you know if the risers make any difference.
|
|
|
|
|