Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[wtfonly16]

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

set the other 5 to compute mode

[ljbawss]

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

Does the problem persist if you use a different miner, such as Ethminer 0.12.0?

Tried Ethminer but the text appears really slow, can't use it

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

set the other 5 to compute mode

Thanks alot! They were indeed set back to Graphic (I changed them to compute in the past but didn't think about it now). All cards run at equal speeds now. The bot does crash after some minutes though, guess I have to play with afterburner again.

[frequencydip]

Major exploit found in Claymore miner! The exploit is based on Satori the nasty exploit that took out IOT devices in 2016, its exploiting port 3333 so block that port and check your rigs ASAP.

Full article
https://arstechnica.com/information-technology/2018/01/in-the-wild-malware-preys-on-computers-dedicated-to-mining-cryptocurrency/

[wtfonly16]

this exploit has already been discovered long ago

https://github.com/nicehash/NiceHashMinerLegacy/issues/96

[BulldogPO]

I tried to mod bios but now Windows does BSOD when installing blockchain drivers.

Try installing the latest 17.12.2 Adrenalin drivers. After it installed you can set the Compute mode in the settings.

Radeon settings -> Gaming -> Global settings -> Per GPU - Compute mode

Also how did you mod? Did you download the BIOS from your card and edit that? Could be that the changes are too high for your card and when it initialises it crashes.

I restored original ASUS bios to my RX 570 4GB cards, removed drivers totally with DDU, rebooted, installed Adrenalin 17.12.2 drivers, rebooted, switched to compute mode, updated Claymore to v10.4 and now I got 16MH/s Ethereum speed per card

What next?

[Claymore]

v10.5:

- applied another workaround for ADL, you must not see "Temperature control thread hangs" message now.
- added version for CUDA 9.1.
- now miner shows a warning if you enabled full remote management (-mport > 0) and did not specify -mpsw parameter.
- now miner shows a warning if you specified default ETH wallet (from default start.bat).

[BulldogPO]

I tried to mod bios but now Windows does BSOD when installing blockchain drivers.

Try installing the latest 17.12.2 Adrenalin drivers. After it installed you can set the Compute mode in the settings.

Radeon settings -> Gaming -> Global settings -> Per GPU - Compute mode

Also how did you mod? Did you download the BIOS from your card and edit that? Could be that the changes are too high for your card and when it initialises it crashes.

I restored original ASUS bios to my RX 570 4GB cards, removed drivers totally with DDU, rebooted, installed Adrenalin 17.12.2 drivers, rebooted, switched to compute mode, updated Claymore to v10.4 and now I got 16MH/s Ethereum speed per card

What next?

 Can you check HWMonitor and see if your cards are going to full clocks? I had an issue that some cards get stuck on half/low clocks. I fixed it by adding -minspeed so the miner restarts when a specific speed isnt met. This way it will restart untill its corrected. Also -lidag 1 can help not getting them stuck.

I check that today and will report back.
Looks like Afterburner is not working while GPU´s are in compute mode?

[dwdhu]

hi,
please submit your updated hashrate results to
https://gpustats.com
thank you

[kkourmousis]

Is it really so, that mining two coins doesn’t decrease Ethereum hashrate? What is the best coin to mine with Ethereum?

Yes it does lower the ethereum hash rate. Most people think the decrease is not significant. Check what to mine for profitability on the second coin, knowing this always changes. I like Decred

But the profits from the second coin outweighs the 2% devfee (instead of 1%) and the decrease in the ethereum hashrate?

You have more factors to consider if you must wether dual mining is profitable for you:

• lower ETH hashrate
• +1% dev fee
• +power consumption (which is pretty much actually)
• higher temperatures
• faster hardware wear

all of the above factors are different for each gpu, so do your research

In my 580s, it is indeed profitable to mine ETH + DCR (even though in my country I pay 0.3$/kwh )

[androstan1234]

Claymore, your miner is logging the following messsge:

AMD topology bug detected, fix it.

I don't really know what this means, so I don't know how to address it, or if it needs to be addressed.

4x rx 570 and 1x gtx 1070.  Stable on latest adrenalin driver and latest GeForce running v10.4.

Can you help me understand this message?

If it helps, I have another rig that does not get this message.  5x rx 580 and 1x gtx 1070.  Stable on aug23 blockchain driver and latest GeForce, running v10.4.

Both win10 pro.

[Claymore]

Claymore, your miner is logging the following messsge:

AMD topology bug detected, fix it.

I don't really know what this means, so I don't know how to address it, or if it needs to be addressed.
4x rx 570 and 1x gtx 1070.  Stable on latest adrenalin driver and latest GeForce running v10.4.
Can you help me understand this message?
If it helps, I have another rig that does not get this message.  5x rx 580 and 1x gtx 1070.  Stable on aug23 blockchain driver and latest GeForce, running v10.4.
Both win10 pro.

Don't worry about this message, it means that miner applies a workaround for bug in Adrenalin drivers which breaks temperature/fan management.

[androstan1234]

Thank you for the quick and helpful response.

[Sparki01]

v10.5:

- applied another workaround for ADL, you must not see "Temperature control thread hangs" message now.
- added version for CUDA 9.1.
- now miner shows a warning if you enabled full remote management (-mport > 0) and did not specify -mpsw parameter.
- now miner shows a warning if you specified default ETH wallet (from default start.bat).

wow, this version 10.5 runs HOT (compared to 10.3). at least 3-4 degrees hotter on each card (CUDA 8.0) and 5-6 degrees hotter  on each card (CUDA 9.1), anyone else seeing this?

4x GTX1070

On the up side

Code:

-ttli

works   never seen it kick in before...

[tf2addict]

this exploit has already been discovered long ago

https://github.com/nicehash/NiceHashMinerLegacy/issues/96

And yet

And it still exists?

[luis31]

okay my sollution was: i decided to change the grafikcards, i use actually only nvidia cards.

but now i have the next problem i use 13 gtx 1070 cards they run without problems but
how can i overclock all cards? msi afterburner shows me only 8 cards i cant overclock the forther 5 cards?

it is not easy to assemble an good rig... but problems are here to solve it... :-)

i will rise the amount of the cards to 18 is this possibel with the asus mining exptert mobo?

thanks...

[toxiroxi]

hi guys,

maybe someone can help. i have a problem which i cannot really identify.
I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows.

The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same.
But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help.

Any ideas? I have attached the last lines from the claymore logfile. btw. i am running 10.3.
Thanks so much for your help - i would be great getting those freezing state rid of. rebooting is ok, but it doesnt at some point....

Code:

ETH: 01/18/18-14:59:08 - New job from eu1.ethermine.org:4444
14:59:08:700	a88	target: 0x0000000112e0be82 (diff: 4000MH), epoch 164(2.28GB)
14:59:08:716	a88	ETH - Total Speed: 57.854 Mh/s, Total Shares: 476, Rejected: 0, Time: 09:24
14:59:08:716	a88	ETH: GPU0 29.061 Mh/s, GPU1 28.794 Mh/s
14:59:08:716	a88	 SC - Total Speed: 1041.379 Mh/s, Total Shares: 240, Rejected: 0
14:59:08:716	a88	 SC: GPU0 523.090 Mh/s, GPU1 518.289 Mh/s
14:59:18:873	a88	got 248 bytes
14:59:18:873	a88	buf: {"id":0,"jsonrpc":"2.0","result":["0x2aa5cfd97efc69f86d2396d0502a258b70e51cce1576b4177bf1adcd69fe4825","0xd5d85ca51867514082660716ef2bedbb55a65250622456390b4a76c4fe98db95","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4b37ad"]}

14:59:18:873	a88	parse packet: 247
14:59:18:873	a88	ETH: job changed
14:59:18:873	a88	new buf size: 0
14:59:18:889	a88	ETH: 01/18/18-14:59:18 - New job from eu1.ethermine.org:4444
14:59:18:889	a88	target: 0x0000000112e0be82 (diff: 4000MH), epoch 164(2.28GB)
14:59:18:889	a88	ETH - Total Speed: 59.505 Mh/s, Total Shares: 476, Rejected: 0, Time: 09:25
14:59:18:889	a88	ETH: GPU0 29.096 Mh/s, GPU1 30.409 Mh/s
14:59:18:904	a88	 SC - Total Speed: 1071.093 Mh/s, Total Shares: 240, Rejected: 0
14:59:18:904	a88	 SC: GPU0 523.726 Mh/s, GPU1 547.367 Mh/s
14:59:19:701	a88	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x38b356a", "0x0000000000000000000000000000000000000000000000000000000006bac143"]}

14:59:19:748	a88	got 39 bytes
14:59:19:748	a88	buf: {"id":6,"jsonrpc":"2.0","result":true}

14:59:19:748	a88	parse packet: 38
14:59:19:748	a88	new buf size: 0
14:59:22:764	11fc	em hbt: 15, dm hbt: 15, fm hbt: 62, 
14:59:22:764	11fc	watchdog - thread 0 (gpu0), hb time 125
14:59:22:764	11fc	watchdog - thread 1 (gpu0), hb time 46
14:59:22:764	11fc	watchdog - thread 2 (gpu1), hb time 62
14:59:22:764	11fc	watchdog - thread 3 (gpu1), hb time 140
14:59:29:249	d7c	GPU0 t=58C fan=55%, GPU1 t=68C fan=86%
14:59:30:827	a88	ETH: checking pool connection...
14:59:30:827	a88	send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

14:59:30:874	a88	got 248 bytes
14:59:30:874	a88	buf: {"id":3,"jsonrpc":"2.0","result":["0x2aa5cfd97efc69f86d2396d0502a258b70e51cce1576b4177bf1adcd69fe4825","0xd5d85ca51867514082660716ef2bedbb55a65250622456390b4a76c4fe98db95","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4b37ad"]}

14:59:30:874	a88	parse packet: 247
14:59:30:874	a88	ETH: job is the same
14:59:30:874	a88	new buf size: 0
14:59:39:719	a88	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x37ac1b4", "0x0000000000000000000000000000000000000000000000000000000006bac143"]}

14:59:39:766	a88	got 39 bytes
14:59:39:766	a88	buf: {"id":6,"jsonrpc":"2.0","result":true}

14:59:39:766	a88	parse packet: 38
14:59:39:766	a88	new buf size: 0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

there is no error or anything in the log - this are the last lines before hanging.....

any ideas or help is appreciated. thanks in advance!

[embombed]

Anyone have any luck getting 10.4 running on Vega 64 running ubuntu 16.04.03 ?

getting the following:
\
AMD Cards available: 1
GPU #0: gfx900 (Device 687f), 8176 MB available, 64 compute units (pci bus 3:0:0)
GPU #0 recognized as Vega
POOL/SOLO version
Cannot build OpenCL program for GPU 0
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
AMD ADL library not found.

No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
Watchdog enabled

ETH: Authorized
Setting DAG epoch #164...

GPU #0: gfx900 (Device 687f), 8176 MB available, 64 compute units (pci bus 3:0:0)
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 0.000 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 164(2.28GB)
GPU0 t=62C fan=13%

Setting DAG epoch #164 for GPU0
Create GPU buffer for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU
GPU 0 failed

[Victorio]

I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows.

The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same.
But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help.

Have you disabled Windows Updates and Driver Update? You can use Win 10 tweakers to do it, e.g. Win 10 Spy Disabler.
I've seen similar issues when a new driver is installed from Windows Update repository.

[toxiroxi]

I am running 2 rigs which are completely identical. The first one runes 1709 win10x64 with beta blockchain drivers and does that pretty stable. sometimes the watchdog is restarting the rig but that's ok in anyway for windows.

The rig2 has the exact same architecture and hardware, but as i have been experiencing issues with 1709 setup and drivers i decided to go with 1703. installation is completely the same.
But after 2-3 days approximately the rig stops responding. the watchdog is not kicking in restarting the rig - i cannot figure out why. There is also nothing in the logfile which might help.

Have you disabled Windows Updates and Driver Update? You can use Win 10 tweakers to do it, e.g. Win 10 Spy Disabler.
I've seen similar issues when a new driver is installed from Windows Update repository.

Thanks for your reply - yes those are disable, but i will double check again to be sure.

[Swiped]

Hi,
I'm new here, I don't know if other have this problem.
Mining just ethereum work great, really stable for days at fast rate.
Dual with lbry make the rig crash/reboot every 2-5 minutes or so... max I got was 17 minutes
I also re-flash with original bios, without OC and it's still rebooting...
my rig:
-win 10
-Biostar Motherboard TB250-BTC Core
-4x sapphire nitro+ rx 570 8gb samsung
-2x sapphire nitro+ rx 570 8gb hynix
-4gb ram
-120G ssd
-virtual memory 20-60gb (I know it's excessive)

one thing I found interresting is when claymore dual is used by nicehash, the computer doesn't reboot.
I also tried the -ethi 2 option without change.
tried 10.0 10.3 and 10.4

I tried for many hours, but I'll mine just ethereum untill it's stable for me.
I can try things if you want. Will sure try the next version. But want to informe you in case it help.

here the last part of logfile...
thank you!

Code:

09:22:54:907	1ea0	ETH: checking pool connection...
09:22:54:907	1ea0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:22:55:017	1ea0	got 243 bytes
09:22:55:017	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x39fa8daae61ea9271acb4e190cfa33638ff5c908cded462db2fc75c7af23cc51","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:22:55:032	1ea0	parse packet: 242
09:22:55:032	1ea0	ETH: job is the same
09:22:55:032	1ea0	new buf size: 0
09:22:56:220	1e94	LBC: put share nonce 93a5ed enonce 98d
09:22:56:236	1e94	LBC round found 1 shares
09:22:56:251	1eb0	 LBC: 01/16/18-09:22:56 - SHARE FOUND - (GPU 4)
09:22:56:251	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "8d090000", "5a5e0aa2", "0093a5ed"], "id": 14, "method": "mining.submit"}

09:22:56:283	1eb0	got 37 bytes
09:22:56:283	1eb0	buf: {"id":14,"result":true,"error":null}

09:22:56:283	1eb0	parse packet: 36
09:22:56:283	1eb0	 LBC: Share accepted (16 ms)!
09:22:56:298	1eb0	new buf size: 0
09:23:04:924	1ea0	ETH: checking pool connection...
09:23:04:924	1ea0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:23:05:049	1ea0	got 243 bytes
09:23:05:049	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x39fa8daae61ea9271acb4e190cfa33638ff5c908cded462db2fc75c7af23cc51","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:05:049	1ea0	parse packet: 242
09:23:05:049	1ea0	ETH: job is the same
09:23:05:065	1ea0	new buf size: 0
09:23:10:346	1ea0	got 243 bytes
09:23:10:346	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0xf52876b64c18f696f331750fa60d61aaa3735b479e57b81c6c3b09d48e4edf03","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:10:346	1ea0	parse packet: 242
09:23:10:346	1ea0	ETH: job changed
09:23:10:362	1ea0	new buf size: 0
09:23:10:362	1ea0	ETH: 01/16/18-09:23:10 - New job from eth-us-east1.nanopool.org:9999
09:23:10:362	1ea0	target: 0x000000006df37f67 (diff: 10000MH), epoch 163(2.27GB)
09:23:10:378	1ea0	ETH - Total Speed: 174.988 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
09:23:10:378	1ea0	ETH: GPU0 28.119 Mh/s, GPU1 29.672 Mh/s, GPU2 29.690 Mh/s, GPU3 29.692 Mh/s, GPU4 29.700 Mh/s, GPU5 28.115 Mh/s
09:23:10:378	1ea0	 LBC - Total Speed: 448.404 Mh/s, Total Shares: 6, Rejected: 0
09:23:10:378	1ea0	 LBC: GPU0 72.054 Mh/s, GPU1 76.034 Mh/s, GPU2 76.081 Mh/s, GPU3 76.086 Mh/s, GPU4 76.106 Mh/s, GPU5 72.043 Mh/s
09:23:10:596	1e84	LBC: put share nonce 6229b8 enonce e45
09:23:10:612	1e84	LBC round found 1 shares
09:23:10:628	1eb0	 LBC: 01/16/18-09:23:10 - SHARE FOUND - (GPU 2)
09:23:10:628	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "450e0000", "5a5e0aa2", "006229b8"], "id": 12, "method": "mining.submit"}

09:23:10:659	1eb0	got 37 bytes
09:23:10:659	1eb0	buf: {"id":12,"result":true,"error":null}

09:23:10:659	1eb0	parse packet: 36
09:23:10:659	1eb0	 LBC: Share accepted (32 ms)!
09:23:10:674	1eb0	new buf size: 0
09:23:14:003	1ea0	got 243 bytes
09:23:14:003	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:14:003	1ea0	parse packet: 242
09:23:14:019	1ea0	ETH: job changed
09:23:14:019	1ea0	new buf size: 0
09:23:14:019	1ea0	ETH: 01/16/18-09:23:14 - New job from eth-us-east1.nanopool.org:9999
09:23:14:019	1ea0	target: 0x000000006df37f67 (diff: 10000MH), epoch 163(2.27GB)
09:23:14:034	1ea0	ETH - Total Speed: 173.727 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
09:23:14:034	1ea0	ETH: GPU0 27.865 Mh/s, GPU1 29.571 Mh/s, GPU2 29.407 Mh/s, GPU3 29.407 Mh/s, GPU4 29.584 Mh/s, GPU5 27.893 Mh/s
09:23:14:034	1ea0	 LBC - Total Speed: 445.172 Mh/s, Total Shares: 7, Rejected: 0
09:23:14:050	1ea0	 LBC: GPU0 71.403 Mh/s, GPU1 75.776 Mh/s, GPU2 75.356 Mh/s, GPU3 75.354 Mh/s, GPU4 75.808 Mh/s, GPU5 71.475 Mh/s
09:23:14:675	1e24	em hbt: 15, dm hbt: 15, fm hbt: 62, 
09:23:14:675	1e24	watchdog - thread 0 (gpu0), hb time 140
09:23:14:691	1e24	watchdog - thread 1 (gpu0), hb time 94
09:23:14:691	1e24	watchdog - thread 2 (gpu1), hb time 16
09:23:14:706	1e24	watchdog - thread 3 (gpu1), hb time 109
09:23:14:706	1e24	watchdog - thread 4 (gpu2), hb time 78
09:23:14:706	1e24	watchdog - thread 5 (gpu2), hb time 15
09:23:14:706	1e24	watchdog - thread 6 (gpu3), hb time 78
09:23:14:722	1e24	watchdog - thread 7 (gpu3), hb time 31
09:23:14:722	1e24	watchdog - thread 8 (gpu4), hb time 125
09:23:14:722	1e24	watchdog - thread 9 (gpu4), hb time 62
09:23:14:722	1e24	watchdog - thread 10 (gpu5), hb time 47
09:23:14:737	1e24	watchdog - thread 11 (gpu5), hb time 141
09:23:14:894	1ea0	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xa04a645", "0x000000000000000000000000000000000000000000000000000000004c5d5488"]}

09:23:14:941	1ea0	ETH: checking pool connection...
09:23:14:941	1ea0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:23:15:050	1ea0	got 243 bytes
09:23:15:066	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:15:066	1ea0	parse packet: 242
09:23:15:066	1ea0	ETH: job is the same
09:23:15:112	1ea0	new buf size: 0
09:23:15:831	1e7c	LBC: put share nonce 1fedd4 enonce fe7
09:23:15:831	1e7c	LBC round found 1 shares
09:23:15:847	1eb0	 LBC: 01/16/18-09:23:15 - SHARE FOUND - (GPU 1)
09:23:15:847	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c20", "e70f0000", "5a5e0aa2", "001fedd4"], "id": 11, "method": "mining.submit"}

09:23:15:878	1eb0	got 37 bytes
09:23:15:878	1eb0	buf: {"id":11,"result":true,"error":null}

09:23:15:878	1eb0	parse packet: 36
09:23:15:878	1eb0	 LBC: Share accepted (31 ms)!
09:23:15:894	1eb0	new buf size: 0
09:23:19:582	1e88	ETH: put share nonce ad68f22c0965c4a5
09:23:19:597	1e88	ETH round found 1 shares
09:23:19:613	1ea0	ETH: 01/16/18-09:23:19 - SHARE FOUND - (GPU 3)
09:23:19:613	1ea0	send: {"id":13,"method":"eth_submitWork","params":["0xad68f22c0965c4a5","0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xd23d945fd9c7ec7f2baa1449d9efb5184d3a56d4b8d101651bd763296c1f64cd"]}

09:23:19:738	1ea0	got 40 bytes
09:23:19:738	1ea0	buf: {"jsonrpc":"2.0","id":13,"result":true}

09:23:19:754	1ea0	parse packet: 39
09:23:19:769	1ea0	ETH: Share accepted (156 ms)!

09:23:19:769	1ea0	new buf size: 0
09:23:20:660	1eb0	got 649 bytes
09:23:20:660	1eb0	buf: {"id":null,"method":"mining.notify","params":["9c21","777aa9cb6e50a36f3870ee91bf56d240673fe4bcca0eaf59e414bb261ed2a8ad","dc093acdf48832de3c94cfd0c710b6f172d694488985161e332dca93af5d4fd1","01000000010000000000000000000000000000000000000000000000000000000000000000ffffffff1d0368ac0404d90a5e5a08","0a2f436f696e4d696e652f0000000001e07823c1080000001976a9140f67e4482043a67dc028142eba63ba77a509c3d388ac00000000",["a344233225b4abac438740605ccdd3fcfae183dc9b4d22c2504d0334e6440b39","86b4f6de38cbfebadf4f114144055ee66cf15c17f6c8c4066928cf8ed356de2d","4e8d54e9533c59653ec5edaaa85dae36f970d49e615374a3c2a9e4142c9c56ef"],"20000000","1a0aafc9","5a5e0ad9",false]}

09:23:20:660	1eb0	parse packet: 648
09:23:20:676	1eb0	new buf size: 0
09:23:20:676	1eb0	 LBC: 01/16/18-09:23:20 - New job from lbc.coinmine.pl:8787
09:23:20:676	1eb0	target: 0x00000000ffff0000 (diff: 4295MH)
09:23:21:504	1e94	LBC: put share nonce 39a53f enonce 39
09:23:21:504	1e94	LBC round found 1 shares
09:23:21:519	1eb0	 LBC: 01/16/18-09:23:21 - SHARE FOUND - (GPU 4)
09:23:21:519	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "39000000", "5a5e0ad9", "0039a53f"], "id": 14, "method": "mining.submit"}

09:23:21:551	1eb0	got 37 bytes
09:23:21:551	1eb0	buf: {"id":14,"result":true,"error":null}

09:23:21:551	1eb0	parse packet: 36
09:23:21:551	1eb0	 LBC: Share accepted (31 ms)!
09:23:21:566	1eb0	new buf size: 0
09:23:23:535	1e28	GPU0 t=61C fan=49%, GPU1 t=57C fan=42%, GPU2 t=55C fan=37%, GPU3 t=59C fan=47%, GPU4 t=58C fan=47%, GPU5 t=58C fan=43%
09:23:24:957	1ea0	ETH: checking pool connection...
09:23:24:957	1ea0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:23:25:067	1e90	LBC: put share nonce 20c96a enonce 158
09:23:25:082	1ea0	got 243 bytes
09:23:25:082	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:25:098	1ea0	parse packet: 242
09:23:25:098	1ea0	ETH: job is the same
09:23:25:114	1ea0	new buf size: 0
09:23:25:114	1eb0	 LBC: 01/16/18-09:23:25 - SHARE FOUND - (GPU 4)
09:23:25:114	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "58010000", "5a5e0ad9", "0020c96a"], "id": 14, "method": "mining.submit"}

09:23:25:082	1e90	LBC round found 1 shares
09:23:25:145	1eb0	got 37 bytes
09:23:25:145	1eb0	buf: {"id":14,"result":true,"error":null}

09:23:25:145	1eb0	parse packet: 36
09:23:25:145	1eb0	 LBC: Share accepted (16 ms)!
09:23:25:160	1eb0	new buf size: 0
09:23:28:614	1e7c	LBC: put share nonce 8695b6 enonce 27f
09:23:28:614	1e7c	LBC round found 1 shares
09:23:28:630	1eb0	 LBC: 01/16/18-09:23:28 - SHARE FOUND - (GPU 1)
09:23:28:630	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "7f020000", "5a5e0ad9", "008695b6"], "id": 11, "method": "mining.submit"}

09:23:28:661	1eb0	got 37 bytes
09:23:28:661	1eb0	buf: {"id":11,"result":true,"error":null}

09:23:28:661	1eb0	parse packet: 36
09:23:28:661	1eb0	 LBC: Share accepted (32 ms)!
09:23:28:676	1eb0	new buf size: 0
09:23:30:317	1e84	LBC: put share nonce 66f32b enonce 311
09:23:30:317	1e84	LBC round found 1 shares
09:23:30:333	1eb0	 LBC: 01/16/18-09:23:30 - SHARE FOUND - (GPU 2)
09:23:30:333	1eb0	send: {"params": ["bMwKZkz6R2qZ9by1f9cw9PM24amrCvh2K6.miner2", "9c21", "11030000", "5a5e0ad9", "0066f32b"], "id": 12, "method": "mining.submit"}

09:23:30:364	1eb0	got 37 bytes
09:23:30:364	1eb0	buf: {"id":12,"result":true,"error":null}

09:23:30:364	1eb0	parse packet: 36
09:23:30:364	1eb0	 LBC: Share accepted (32 ms)!
09:23:30:380	1eb0	new buf size: 0
09:23:34:911	1ea0	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xa543fb3", "0x000000000000000000000000000000000000000000000000000000004c5d5488"]}

09:23:34:974	1ea0	ETH: checking pool connection...
09:23:34:974	1ea0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

09:23:35:099	1ea0	got 243 bytes
09:23:35:099	1ea0	buf: {"jsonrpc":"2.0","id":0,"result":["0x1db9a600cf7799c6d4f7a7e995fa3fa58f8d2d7f896eadf775ac40c15a60a415","0xec6e8e0d8056cf9eb61046eaeb754b8e71f48e10a86c61f4d287b4ac5244653f","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

09:23:35:115	1ea0	parse packet: 242
09:23:35:115	1ea0	ETH: job is the same
09:23:35:130	1ea0	new buf size: 0

Did you ever solve this?  I have 4 rigs running similar Sapphire 570 8g cards, (2X6) with Hynix, (1X6) with Micron, and (1X6) with Samsung, only the Samsung cards run stable and the other three are incredibly unstable.  I have purchased some new riser cards just to make sure I didn't get a bad batch.  I have tried every setting and bios change under the sun and can't get them stable.  They just hang in open cl and reset.  Never seen this in any of my other rigs, just on the Sapphire 570 8g cards.  I am beginning to believe it is just a lousy batch of cards.  I'll let you know if the risers make any difference.