Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Amkolino]

Claymore's Dual Ethereum AMD v10.6 (Windows)

after an hour of work, a problem appears on the rx 570 cards,

can not get curren- t temperature, error 15

reboot the system and everything is working fine

Maybe OC too high?

Every single failure I had with Claymores - Turned out = too much memory oc

[MrDeity]

I have 3 GPUs (one Vega 64, two RX 580s) and I can only consistently keep the vega 64 and one RX580 connected after reboots.  I've checked the risers (they appear to be good).  I saw on youtube that sometimes the video cards don't work without them thinking that they have a video card attached so I have two monitors (or I can use the HDMI plugin that fakes a monitor).  I have an older MOBO that should have the appropriate requirements but as I mentioned earlier, sometime I can get the rig to see the third card but sometimes I can't. 

Any suggestions?

[Amkolino]

When the card is not accessible do you get a yellow triangle sign in your device manager (if you use windows 10 e.g.)?

I hade some gtx 1070, they worked from time to time - then again they didn't.
After some reboot they worked then they didnt etc..

Replaced the card, everything fine.. :-(

[ganzocrypt]

Do you guys dual mine? If, which coin is best?

I mined dual Eth / Sia - But Sia Diff is too high now..

I tried DCR - But then my cards have too low eth-hashrate and if I change the intensity there is very low income from DCR.

What's you opinion on this?

Dual mining with current coins SIA/DCR etc is not worth anymore.

Claymore dev is working on a new set of coins for dual mining.
Not sure which ones yet and which algo but looks like is going to be soon.

[dollos]

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

[chentron]

it also happens to me 2 weeks ago.
I changed to genoil and it continue to work , but today again stop work. Same error claymore ( CUDA error 11 cannot allocate DAG) and genoil (lack of memory).
But I have other miner with NVOC and genoil and it is working correctly.
So I imagined it is a problem of my windows 64bit anniversary. I updated nvidia driver to the last version, but still not working.

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

[Amkolino]

Do you guys dual mine? If, which coin is best?

I mined dual Eth / Sia - But Sia Diff is too high now..

I tried DCR - But then my cards have too low eth-hashrate and if I change the intensity there is very low income from DCR.

What's you opinion on this?

Dual mining with current coins SIA/DCR etc is not worth anymore.

Claymore dev is working on a new set of coins for dual mining.
Not sure which ones yet and which algo but looks like is going to be soon.

Thanks for the information - I just read Devs want to cut Dual fees down to 1%.

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

My 1060 3gb Rig ist working fine for months now. 2.6gb vram in use.
But I am using 10.1 Miner still, Idk if that is the reason that it works.

[thecoolestnoodle]

Hi guys,

My new rig suddenly stop working at this morning, and it keep showing unknown option -asm and unknown option 1. I am using SMOS claymore miner v10.6 . Anyone have any idea what is happening with my rig/ SMOS? It was working fine for a week and it stopped this morning .

config : -wd 1 -r 1 -epool stratum+tcp://eth-asia1.nanopool.org:9999 -ewal 0x70224542C9fFBF057B29B72c6F86C71BE0ea6834/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

Hardware
p104-100 x10
B250 mining expert

Miner ended/crashed. Restarting miner in 10 seconds --------------
============ Starting Miner ===============
UNKNOWN OPTION -asm
UNKNOWN OPTION 1
Binary file (standard input) matches

Sorry for my poor English

[valev1]

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

increase your swap size with 10 ot 20 GB

[depuh]

Claymore's Dual Ethereum AMD v10.6 (Windows)

after an hour of work, a problem appears on the rx 570 cards,

can not get curren- t temperature, error 15

reboot the system and everything is working fine

Maybe OC too high?

Every single failure I had with Claymores - Turned out = too much memory oc

settings did not change from version 9.3

Now everything checked up, and lowered the frequency from memory

[Ratledge]

<snip>

https://unitedcardists.com/download/file.php?id=18090&mode=view

(what's the trick to posting imbedded graphics?   hmmmm...  I hadn't tried)

<snip>

You can not embed any graphics as you are a Newbie you have to be a "Jr.Member" before you can post with pictures.

Ah, got it. Thanks! I knew that I was missing something. I run a website with forums, but I don't think I read the rules hrre.

[thesunday]

I'm sorry if this was asked already. I mine expose with 2GB gpu and this miner quits all the time because there is no free VRAM for devfee DAG file. Can you help me? I set allcoins and allpools to 1.

*edit: I see now in readme.txt, for expose I should use +-allcoins exp'.

[audioempire]

Isit possible to mine from +2 ip addresses at dodopool to one wallet? We are unable but i dont know what i must change in config to confirme it rightly...

any advice?

[Victorio]

Isit possible to mine from +2 ip addresses at dodopool to one wallet? We are unable but i dont know what i must change in config to confirme it rightly...

any advice?

What do you mean by "from 2 ip addresses"?
You have a dynamic IP, you mine with 2 rigs on the same wallet or you look how to switch mining server when it drops connection?
Dynamic IP - no problem
2 rigs on same wallet - no problem
Switching servers - use epools.txt

[rorschach1]

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

Lol it's working fine. I tried now on my home 1060 3Gb

[audioempire]

Isit possible to mine from +2 ip addresses at dodopool to one wallet? We are unable but i dont know what i must change in config to confirme it rightly...

any advice?

What do you mean by "from 2 ip addresses"?
You have a dynamic IP, you mine with 2 rigs on the same wallet or you look how to switch mining server when it drops connection?
Dynamic IP - no problem
2 rigs on same wallet - no problem
Switching servers - use epools.txt

we want to make two rig for this time. one is located in czech republic and one in germany. We want to mine in dodopool. I check txt and there is different spec in each pool. What do u advice? Mine separate or its possible to mine together?

Thanks

[idontknowmining]

Odd situation.

Have a rig with 3 x RX570 4GB.  Was getting 27Mh/s with Claymore 10.6.

Had to change rig to different board and hard drive.  Board is the same, hard drive is slightly different (slower, but didn't think this mattered).
Same amount or RAM *GB, same pagefile, 16GB, same divers, same version of windows but now only getting 20Mh/s.

ANy ideas?  Really frustrated.

Drivers version is the latest, 18.2 blockchain from amd site.
Bios is modded the same
"UberMix v3.1

777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354"

Card info:

Radeon Software Version - 18.2.1
Radeon Software Edition - Adrenalin
Graphics Chipset - Radeon RX 570 Series
Memory Size - 4096 MB
Memory Type - GDDR5
Core Clock - 1244 MHz
Windows Version - Windows 10 (64 bit)
System Memory - 8 GB
CPU Type - Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz

Radeon Settings Version - 2018.0131.1849.33856
Driver Packaging Version - 17.50.17.03-180131a-323782E-RadeonSoftwareAdrenalin
Provider - Advanced Micro Devices, Inc.
2D Driver Version - 8.1.1.1634
Direct3D® Version - 9.14.10.01316
OpenGL® Version - 6.14.10.13506
OpenCL™ Version - 23.20.15017.3010
AMD Audio Driver Version - 10.0.1.6
Vulkan™ Driver Version - 2.0.1
Vulkan™ API Version - 1.0.65

Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - Radeon RX 570 Series
Device ID - 67DF
Vendor ID - 1002
SubSystem ID - 22F7
SubSystem Vendor ID - 1458
Revision ID - EF
Bus Type - PCI Express 3.0
Current Bus Settings - Not Available
BIOS Version - 015.050.002.001
BIOS Part Number - xxx-xxx-xxx
BIOS Date - 2017/05/18 08:21
Memory Size - 4096 MB
Memory Type - GDDR5
Memory Clock - 1750 MHz
Core Clock - 1244 MHz
Total Memory Bandwidth - 224 GByte/s
Memory Bit Rate - 7.00 Gbps
2D Driver File Path - /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0005

TIA

[muzuca]

Hey guys, still worthiness mine ETH + DCR?

I did some calculations and discounting the energy costs still worthing in my country, apparently.

Did you give up of dual mining?

[Ratledge]

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

Lol it's working fine. I tried now on my home 1060 3Gb

In order to mine effectively, the DAG is kept in a ring buffer in VRAM (graphics memory).

You don't usually need to think about it, but graphic cards these days host programs, like "Dropbox", "WinZip", "Firefox" and others. Those reduce the total amount of DDR4 memory available to the mimer.

On nVidia cards (not certain how to do this on AMD cards) you can set a parameter in the driver to show the apps running in VRAM in a 'tray' icon. Now that we went to Epoch 168 today, the size is 2.31GB. - only one hundredth of a gigabyte but still, 10k more than the previous Epoch. Eventually 3GB cards will be unable to hold the DAG in memory.

[dollos]

ok guys it seems 3gb cards have officially stopped working on eth network.  Dag erro etc etc, the 6gb cards in the same rigs are doing fine. surprising though is that under stats its says 2.4gb used for dag.

one by one all the 3gb rigs gave up.

or am i missing something?

Lol it's working fine. I tried now on my home 1060 3Gb http://i99.fastpic.ru/big/2018/0207/ee/b22615c135858269c7284bcc78c673ee.jpg

In order to mine effectively, the DAG is kept in a ring buffer in VRAM (graphics memory).

You don't usually need to think about it, but graphic cards these days host programs, like "Dropbox", "WinZip", "Firefox" and others. Those reduce the total amount of DDR4 memory available to the mimer.

On nVidia cards (not certain how to do this on AMD cards) you can set a parameter in the driver to show the apps running in VRAM in a 'tray' icon. Now that we went to Epoch 168 today, the size is 2.31GB. - only one hundredth of a gigabyte but still, 10k more than the previous Epoch. Eventually 3GB cards will be unable to hold the DAG in memory.

Ah i forgot to add that im mining etc abnd the dag is past 178 now . i switched to eth its working fine. etc dag has reached max for 3gb cards.